• Plastiprint static cling is an
• 8 mil solvent series static cling vinyl that is highly plasticized and feeds easily and reliably through most printers.
• These vinyls cling tightly to glass and other smooth, glossy surfaces. Because they are adhesive-free, they are easy to install and remove,
• can be removed and re-applied and, because they are true static cling vinyls, they never leave an adhesive residue behind.

2717-SIJ54SCVC150 1063200 54″ x 150 ft. Clear Plastiprint Static Cling Vinyl 2717-SIJ54SCVW150 1063203 54″ x 150 ft. White Plastiprint Static Cling Vinyl

Arlon DPF 207 6 Mil Removable Interior Wall Decoration Film
• Short to medium-term indoor durability
• Intermediate matte white film with removable pressure-sensitive adhesive and premium moisture-resistant polycoated lay-flat liner
• Clear removable pressure-sensitive adhesive is designed to bond well to substrates such as smooth painted non-vinyl walls
• Great for interior home and retail wall decorations; P.O.P. displays and murals
• Print Compatibility: Solvent, Eco-Solvent and UV

http://www.arlon.com/Objects/Documents/PIBS/DPF%20207%20PIB_LR.pdf

DPF 207 Vinyl Film
Removable Interior Wall Decoration Vinyl Film
DPF 207 is a 6-mil (150 micron) matte white vinyl film with a clear removable pressure-sensitive adhesive. The adhesive is
specially designed to have initial repositionability to substrates such as smooth painted non-vinyl walls without compromising
the ultimate bond. DPF 207 has a premium moisture stable polycoated lay-flat liner that is optimal for printing on a variety of
print systems.
APPLICATIONS & FEATURES
• Home décor
• Retail POP displays
• Interior wall decorations, advertising and murals on smooth painted non-vinyl walls.
• Digital printing with a wide variety of direct print systems, such as solvent, UV, and UV screen.
PERFORMANCE & PHYSICAL DATA
*Standard Terms & Conditions Apply Effective Date 10/11
PROPERTY TEST METHODS TYPICAL VALUE
SURFACE FINISH Gloss Meter 60° Reflection ≤ 15%
THICKNESS Micrometer, Federal Bench Type 6-mil (150 micron)
TENSILE STRENGTH Tensile Tester 2-in (51mm) jaw seperation; crosshead speed
of 12 in/min. (5.1 mm/s)
20 lb/in 3.6 kg/cm
ELONGATION Instron Tensile Tester as above ≥ 125%
SHELF LIFE Free from excessive moisture, temperature, direct sunlight 2 Years
APPLICATION
TEMPERATURE RANGE
On clean, dry substrate 50°F to 90°F 10°C to 30°C
SERVICE
TEMPERATURE RANGE
On clean, dry substrate -20°F to 176°F -29°C to 80°C
DIMENSIONAL STABILITY Shrinkage After 158°F (70°C), 48 hours aging < 25-mils < 0.635 mm
PEEL ADHESION PSTC-1, 15 min, RT 70°F (21°C) 1.1 lb/in 0.20 kg/cm
LINER RELEASE TLMI Release at 90°, 300 in/min (760 cm/min) 45 g/2 in 9 g/cmThe following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon
products are based on tests believed to be reliable and within the accuracy of the equipment used
to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes
no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace
any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury,
loss or damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing
or printing on the product. Before using, user shall determine the suitability of the product for
its intended use. User assumes all risk and liability of every nature in connection therewith. No
statements or recommendations other than those contained in the technical information published
by Arlon shall have force or effect unless contained in an agreement manually signed by the
officers of seller and manufacturer.

MACtac ROODLE 54″ X 100′
6.0-mil Semi Rigid Calendered Matte White Inkjet.
Vinyl with Removable Adhesive.
• Outdoor durability unprinted 3 years.
• Designed for edge-to-edge printing – no border needed. Great for wall murals and large decals!.
• 6.0 mil semi rigid calendered makes the product easy to handle and install.
• Has an aggressive removable acrylic pressuresensitive adhesive, removable up to 2 years.
• 90lb SuperFlat P.E. coated kraft liner.
• Specifically designed for indoor wall posters and murals on smooth, flat surfaces.
• Print Compatibility; Solvent, Eco- Solvent, UV, Latex, Screen Print.

http://mactac.com/fileadmin/user_upload/Graphic/Performance_Guides/RO628ROODLE.pdf

PRODUCT: IMAGin® ROODLE
RO628 Removable 6 mil Semi-Rigid PVC

PRODUCT DESCRIPTION:
RO628 ROODLE is a 6.0-mil matte white, semi rigid calendered PVC film designed for UV screen,
solvent-based ink jet and off-set printing. The product is coated on one side with an aggressive removable
acrylic pressure sensitive adhesive and supplied with a 90# SuperFlat P.E. coated kraft liner. RO628 is
specifically designed for indoor wall posters and murals on smooth, flat surfaces.

PHYSICAL PROPERTIES: TYPICAL VALUES* TEST METHOD
Thickness, inches (µm) ASTM D-645
Film plus adhesive 0.007 (200)

Peel Adhesion, lb. /in. (N/25mm) ASTM D-903
180° on Stainless Steel – 24 hr. 2.1 (9.2)

Quick Tack on SS, lb. /in² (N/25mm) 2.1 (3.50) MACtac CTM-25

Dimensional Stability, (%) MACtac CTM-21
48 hours @ 158°F (70°C) (Method D)
MD 0.40 10” x 10” Sample
CD 0.20 bonded to aluminum.

Surface Burning Characteristics ASTM E84-01 or
Flame Spread 20 ANSI/NFPA 255 or
Smoke Density 120 UCB 8-1
Meets: ANSI Class A
NFPA Class A
UCB Class 1
Temperature Ranges,
Minimum Application: 30°F (-1°C)*
End Use: -40°F to 180°F (-40°C to 82°C)
• When applying ROODLE at temperatures below 50°F the semi-rigid vinyl face will become brittle.
Therefore special care must be employed during installation to keep from tearing the face.

INTENDED FOR: Wide format, screen, eco-solvent, solvent-based, latex, UV-cured inkjet and off-set printing
using UV inks or plastic/oxidizing inks. To achieve the best possible print quality, please make sure that the correct
ICC profiles or printer settings are used. Profiles can be downloaded from www.mactac.com. Printer and heater
settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites.

The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing
systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the
suitability of any profile for use in their specific print environment.

DURABILITY: The outdoor durability of the unprinted film is 3 years. ROODLE has up to 2 year removability
after application. Overlamination of the inkjet-printed material with Permacolor®
overlaminates delays color fading
that may occur over time. This color fading is mainly dependent upon the inks quality (see technical data sheets
given by the ink manufacturers) and the pressure sensitive media being used.

LIMITATIONS:
Due to the wide variability of interior walls, sealants and paints, no claims for successful applications to or
removal from painted wall surfaces are made by MACtac. It is the users’ responsibility to determine the products
suitability for the intended wall. 1) The user is responsible for determining the product’s suitability, including adhesion and if needed,
removal characteristics when used in applications other than listed specifically in this Performance
Guide.
2) If there are any questions about applications, please contact your MACtac sales representative to
discuss your requirements for recommendations.
3) If this is a printed Performance Guide it is an uncontrolled document. Please check the MACtac
website for the latest, most up-to-date version.

SHELF LIFE: 2 years from Date of Manufacture when stored at 60/77°F (15/25°C) and 50% relative humidity in the original
package.

RECOMMENDATIONS:
Always test your ROODLE media with your inks and laminating films prior to commercial use.
1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The maximum allowable ink
saturation is 270%.
a) Images printed with solvent inks must be thoroughly dried prior to rolling for shipment. Retained solvent will
affect edge adhesion.
2) Transportation Conditions: To allow for easy transportation, IMAGin media can be rolled up, with the image out, with a
minimum diameter of 6 inches (15cm). When the image is not protected by an overlaminate, make sure the print is
completely dry and protected in a plastic bag. During transportation or storage, avoid exposing them to extreme temperature
and humidity changes.
3) Installation Instructions (Reference TA2500 for detailed drywall applications):
a) Before installing, unroll and lay flat. Allow the printed ROODLE to relax at room temperature for at least 90 minutes.
b) Do not allow the adhesive to touch any other areas of the product as this may result in damage to your ROODLE.
c) Do not install your ROODLE onto cold or damp surfaces, or anywhere near heaters, fires or central heating radiators.
d) If the wall has been freshly painted, allow it to fully cure, at least one week prior to installing your ROODLE. Consult
your paint manufacturer for proper cure times.
e) MACtac recommends a test strip be included in the graphic for the end user to test on their walls. For best results
insure the wall has a flat, smooth, even, dry surface. Avoid textured surfaces including textured paints, wallpapers,
stucco, scrub-able paints, etc.
f) Make sure your ROODLE will fit in the area. Measure your wall and your ROODLE.
g) Use a clean alcohol saturated cloth to remove any dust from your wall surface. You may need a damp cloth or cleaners
to remove excessive dirt and dust followed by the alcohol wipe. If so, allow an additional 24 hours to dry as many
surfaces absorb moisture like a sponge!
h) Spread out your ROODLE on a flat surface, face down. Begin peeling back the liner off from the top down about 2 – 5
inches, and fold under. Position the ROODLE on the wall. Once it is in place, lightly tack down the exposed
adhesive. Using a squeegee, smooth down the rest of the exposed adhesive working top down and from the center out.
Remove 6 – 10” additional liner and apply with squeegee. Again working from the top down and from the center out.
i) Continue in this manner until the entire ROODLE has been applied.
j) For wall murals plan the graphic with a 1inch overlap.
k) Finish, by re-squeegeeing all the outer edges and overlapping seams to insure good contact with the wall surface.
4) Removal Instructions:
a. Starting in a corner, carefully pry up the vinyl from the wall.
b. Pull back at a 90° angle to create the least amount of stress on the painted surface underneath the graphic.
c. Continue peeling at a slow speed, keeping the angle 90° and diagonal to the panel
d. For best results, remove slowly.
* Values given are typical and are not necessarily for use in specification.

Orafol ORAJET 3751 RA
2 Mil Cast Gloss White Inkjet Vinyl with Repositionable Adhesive.
• 8 year outdoor durability.
• Low initial tack.
• Grey, opaque, repositionable, solvent-based, removable adhesive with air-egress; clean removability for up to 4 years.
• 101lb liner.
• Ideal for applications over vehicle wraps and uneven or curved surfaces, rivets and corrugations.
• ORACAL suggests laminating with Oraguard 290, 290F, 293.
• Print Compatibility: Solvent, Eco-Solvent, UV, Latex.

http://www.signwarehouse.com/Miva/PDFs/Media/M_OraJET-3751RA_Specs.pdf

Description
2.25-mil, cast PVC film with a low initial tack adhesive, white gloss surface with RapidAir® technology
Release Paper
101# PE-coated silicone paper featuring an advanced air release technology to facilitate quicker, easier application
Adhesive
Grey, solvent-based, repositionable, permanent low initial tack adhesive can be removed with little or no adhesive residue
for up to four years with heat
Applications
Long-term, irregular surfaces such as outdoor signage, and complex vehicle and fleet graphics

Attention
Recycling Recommendation: Waste class similar to household waste, is to be recycled according to the local regulations.
Surfaces to which the material will be applied must be cleaned thoroughly of dust, grease or any contaminants. Freshly lacquered
or painted surfaces should be allowed to stand for at least three weeks after complete curing. The compatibility of selected
lacquers and paints should be tested by the end-user prior to use.
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a
source of information and is given without any guarantee and does not constitute a warranty. Due to the wide variety of possible
uses and applications, customers should independently determine the suitability of this material for their specific
purpose, prior to use.
For instant access to more information click on the links below
Profiles
http://www.oracal.com/knowledge/icc-profiles.asp
Tech Support
http://www.oracal.com/knowledge/contact-support.asp
Find a Distributor
http://www.oracal.com/distributors/
General Warranty
http://www.oracal.com/_userfiles/File/GeneralWarranty.pdf Revised 11/11
Technical Data
Thickness (without protective paper and adhesive) 2.25 mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004”
Temperature Resistance Adhered to aluminum, -58°F to +212°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 4.1 lb/in
Tensile Strength (DIN EN ISO 527)
Along
Across
Min. 19 MPa
Min. 19 MPa
Elongation at Break (DIN EN ISO 527)
Along
Across
Min. 120%
Min. 120%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Application Temperature 50°F
Available Lengths
Available Widths (inches)
150’ (50-yard)
30, 54, 60
Minimum Life Expectancy (based on accepted application
procedures on vertical surfaces)
8 years (Unprinted)
Recommended Laminates
Oracal recommends that printed film is allowed to dry for at least 24 hours at 70°F (48-72 preferred) before applying a laminate.
ORAGUARD® Series 290, 290F, 293

Auto Wrap
• Autowrap 160 is designed to protect automotive and other painted finishes during transit and in storage.
• Great for protecting vehicle wraps after they leave your shop.
• 1.9 mil thickness.
• UV stabilized Polyolefin film.
• Clean one piece removal even after extended application with no residue.
• Conformable over compound curves.
• Adheres evenly to the applied surface and resists edge lift.

Size 24″ x 600 ft

Autowrap®

OEM assembly plants rely on a wide variety of masking products to protect the vehicle finish during the process. Damage resulting from abrasion is common and costly to repair. Our “Anti-Mutilation” protective film and paper products are applied to both interior and exterior portions of the vehicle. Autowrap transit film protects exterior automotive surfaces during delivery to the dealer. Additional areas to protect include: fenders, rocker panels, kick panels, bumpers, doorsills, pillar posts and door edges. Products are simple to apply as the rolls can be perforated at a specified length for dispensing without the need for cutters or equipment. This material is normally removed either at completion of the assembly process, at the OEM location or by the dealer when the vehicle is prepared for sale.  Click here to view our Autowrap Application video!

American Biltrite Inc., with more than 100 years of experience in manufacturing tape products, along with our strict adherence to ISO 9001:2008 quality standards, are your assurance of the most reliable and cost effective masking materials on the market today. Since we handle every aspect of manufacturing ourselves, from material selection to manufacturing to storage and shipping, Autowrap products perform flawlessly and consistently day after day, year after year.

• Premium general purpose white mounting film. Features single release liner. Two-sided high peel with good tack. Water-Based Acrylic Adhesive.
• White Mounting Film Permanent/Permanent
  • Good for all general purpose mounting applications
  • Features single release liner
  • Two-sided high peel with good tack
  • Designed for large format digital printing
  Construction
  Product Number: KJMOUNT/WHT/
  Carrier: White Polypropylene – 2.3 mil
  Adhesive: Clear Permanent Acrylic
  Liner: 60# Bleached Kraft
  Product Scheme: 1 Permanent Adhesive
  2 White Carrier
  3 Permanent Adhesive
  4 Liner
  Typical Performance Values
  The following information on physical and chemical characteristics is based upon tests
  believed to be reliable. The values are intended only as a source of information. They
  are given without guarantee and do not constitute a warranty. The purchaser should
  independently determine, prior to use, the suitability of this material for his/her specific
  purpose. (Data represents averages and is not intended for use as a specification.)
  Outdoor Durability: Up to 1 year
  Typical Adhesion Values: 180° Peel Test
  Substrate 24 hours
  Stainless Steel 3 lb/in
  Static Shear (1/2-inchx1/2-inchx500 grams) > 24 hours
  Temperature: 50° F (Minimum for Substrate)
  Service Temperature Range: -40° F to 180° F
  Chemical Resistance: Resistant to detergent, gasoline, HCI – 10%,
  motor oil – SAE 20 and NH40H – 10%.
  Shelf Life: 1 year from ship date when stored in proper
  conditions 70° F and 50% relative humidity

KJMOUNT/WHT/38/200
KJMOUNT/WHT/43/200
KJMOUNT/WHT/51/200

KJMOUNT/WHT/54/200
KJMOUNT/WHT/60/200

• Permanenet, Pressure-sensitive adhesive
• Available in numerous colors, including black (which reflects white)
• Similar daytime and nighttime appearance that retains most of its reflectivity when wet
• Designed for excellent cutting and weeding with computer sign cutting equipment
• For vertical, flat or curved surfaces with or without rivets
• Unprocessed film resists fuel vapors or occasional spills

http://multimedia.3m.com/mws/media/902755O/faq-e-cut.pdf

http://multimedia.3m.com/mws/media/511473O/5100r-scotchlite-reflective-graphic-film.pdf

https://multimedia.3m.com/mws/media/401906O/5100r-ij5100r-scotchlite-reflective-eng-grd-sp-es-pij-tmt.pdf

Product Description
• Series 5100R for Screen Printing and Thermal Mass Transfer
• IJ5100R-10 for Solvent, UV, and Latex Inkjet Printing
• 7-mil, flexible, enclosed lens, retroreflective, engineer films that offer flexibility and versatility
Product Features
• 5100R Series available in 15 colors, including black (which reflects white)
• Similar daytime and nighttime appearance that retains most of its reflectivity when wet
• Excellent angularity
• Pressure-sensitive adhesive
• Designed for excellent cutting and weeding with computer sign cutting equipment
• For vertical, flat or curved surfaces with or without rivets
• Unprocessed film resists fuel vapors or occasional spills
• Removable with heat and/or chemicals
• Expected Performance Life of 7 years (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical, outdoor
surface)
Recommended Types of Graphics and End Uses
• Most standard vehicle, straight trucks, semi-trucks and semi-trailers markings and graphics
• Cut letters and decals
• Non-regulated signage
When constructed and used as described in this Bulletin, these types of graphics and end uses may be warranted by the 3M MCS Warranty
or the 3M Performance Guarantee. Please read the entire Bulletin for details.
i IMPORTANT NOTE
Some substrates such as under-cured polyurethane paint, fiberglass, and some paint systems may continue to outgas for some time.
Two-part polyurethane paints and screen print clears may stop curing when the air and surface temperature are lower than 75 F (24
C). This film is not recommended for use on stainless steel.
Recommended Compatible Products
See 3Mgraphics.com/warranties for a complete list of compatible products that are approved by 3M for use with the base film covered in this
Bulletin and used for the creation of a graphic that may be eligible for the 3M MCS Warranty or 3M Performance Guarantee.
OEM Inkjet Inks and Printers for the 3M Performance Guarantee
See the 3M Performance Guarantee Matrix for a complete list of compatible OEM Inkjet Inks and Printers that are approved by 3M for use with
the base film covered in the Bulletin and used for the creation of a graphic that may be eligible for the 3M Performance Guarantee.
Product Bulletin 5100R/IJ5100R
Release U, Effective December 2015 (Replaces T, Apr ‘15)
Series 5100R
IJ5100R-10
Quick Links
3M Graphics Warranties
Technical Information Selector
Safety Data Sheets (SDS)
Flammability (ASTM E84 Reports)
Videos
Some of these links lead to web-based resources
that are not product-specific.
3M Graphics Warranties
2 Product Bulletin 5100R/IJ5100R Release U
3M Reflective Graphic Film Scotchlite
Screen Printing
• 3M Screen Printing Ink Series 1900 (Solvent), line color and four color
• 3M Scotchlite Screen Printing Ink Series 2900 (Solvent)
• 3M Screen Printing UV Ink Series 9800, line color and four color
Graphic Protection
• 3M Scotchcal Gloss Overlaminate 8518
• 3M Scotchcal Luster Overlaminate 8519
• 3M Screen Print Gloss Clear 1920DR
• 3M Screen Print UV Gloss Clear 9740i
• 3M Screen Print UV Gloss Clear 9800CL
• 3M Scotchcal Optically Clear Overlaminate 8914
Application Tapes
See 3M Instruction Bulletin AT-1 to determine what application tape is recommend for your film or finished graphic.
Other Products
• 3M Edge Sealer 3950
Certificate of 3M MCS Warranty
Graphic manufacturers who produce digitally printed graphics made with all 3M Graphics Products, including 3M Ink purchased through a
qualified 3M Distributor or 3M Printing Partner, may register to be recognized with a Certificate of 3M MCS Warranty. Only graphic
manufacturers having a current Certificate of 3M MCS Warranty are eligible to extend this warranty to their customers.
NOTE: For non-digitally printed Finished Graphics, check your eligibility for the 3M MCS Warranty by viewing the 3M Graphics Warranty
Period Selector at www.3Mgraphics.com/warranties.
Characteristics
These are typical values for unprocessed product. Processing may change the values.
Physical Characteristics
Characteristic Value
Material Vinyl
Retroreflection
Definition
The typical coefficient of retroreflection defined is measured at a -4 entrance angle and a 0.2 observation
angle. It is expressed in candlepower per foot-candle per square foot (candela/lux/square meter) per ASTM
E810.
The entrance angle is formed by a light beam striking the surface at a point and a line that is perpendicular to
the surface at the same point.
An observation angle is formed by the light beam striking the reflective surface and returning to the observer.
From 800 feet (249 meters), a motorist normally views a graphic at a 0.2 angle.
Thickness With adhesive: 7–8 mil (0.18–0.20 mm)
Adhesive Pressure-sensitive
Adhesive Color Clear with silver underneath
Liner Polyethylene-coated paper
Product Bulletin 5100R/IJ5100R Release U 3
3M Graphic Film Controltac 3M Reflective Graphic Film Scotchlite
Application Characteristics
Warranty Information
Warranty Coverage Overview
The warranty coverage for eligible graphics is based on the user both reading and following all applicable and current 3M Graphics Product and
Instruction Bulletins. The warranty period for eligible graphics is as stated in the 3M Graphics Warranties Matrices, found at 3Mgraphics.com/
warranties, at the time that the film was purchased. The warranty period may be reduced and stipulations may apply for certain constructions
and applications, as covered in this Bulletin.
The warranties set forth in this Bulletin are made in lieu of all other express or implied warranties, including any implied warranty of
merchantability, fitness for a particular purpose, or arising out of a course of dealing, custom, or usage of trade.
Adhesion, Typical
24 hours after
application
Aluminum 4.8 pounds/inch (0.86 kg/cm)
FRP (Fiberglass Reinforced Plywood) 3.7 pounds/inch (0.7 kg/cm)
Painted aluminum panels 2.6 pounds/inch (0.5 kg/cm)
Safety Standards See “Health and Safety” on page 7 for ASTM, NFPA® and AAR information
Chemical
Resistance
• Resists mild alkalis, mild acids, and salt
• Excellent resistance to water (does not include immersion)
• Resists occasional fuel spills
Film Colors and
Typical
Retroreflection
At -4° entrance angle and 0.2°
observation angle.
Film
IJ5100R-10
5100R-10
5100R-14
5100R-64
5100R-65
5100R-71
5100R-72
5100R-74
5100R-75
5100R-76
5100R-77
5100R-78
5100R-79
5100R-81
5100R-82
5100R-85
Color Name
White
White
Orange
Gold
Rich Gold
Yellow
Red
Royal Purple
Blue
Light Blue
Green
Light Green
Brown
Lemon Yellow
Ruby Red
Black
Typical Coefficient of
Retroreflection
100
100
20
70
65
65
20
5
10
10
20
20
5
75
15
30
Flammability Call 1-800-328-3908
Characteristic Value
Finished Graphic Application
Recommendation
Surface type: flat, with and without rivets, moderate curves
Substrate type: aluminum, Fiberglass Reinforced Plywood (FRP), paint
Graphic orientation: Vertical only
Application method: Dry
Application temperature: air and substrate
• Flat without rivets: 50–85 F (10–29 C)
• Flat with rivets: 55–85 F (15–29 C)
Temperature Range After
Application -30 to +200 F (-34 to +93 C) (not for extended periods of time at the extremes)
Removal Removable with heat and/or chemicals from most substrates within specified warranty
period
Characteristic Value
3M Graphics Warranties
4 Product Bulletin 5100R/IJ5100R Release U
3M Reflective Graphic Film Scotchlite
3M Basic Product Warranty
3M Graphics Products are warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications
stated in its applicable 3M Graphics Product Bulletin and as further set forth in the 3M Graphics Warranties Bulletin.
Limited Remedy
The limited remedy applicable to each warranty is addressed in the 3M Graphics Warranties Bulletin found at 3MGraphics.com/warranties.
Limitation of Liability
Except to the extent prohibited by law, 3M SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO PURCHASER OR USER FOR ANY DIRECT
(EXCEPT FOR THE LIMITED REMEDY PROVIDED HEREIN), INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, LABOR, NON-3M MATERIAL CHARGES, LOSS OF PROFITS, REVENUE, BUSINESS, OPPORTUNITY, OR GOODWILL) RESULTING
FROM OR IN ANY WAY RELATED TO 3M’S GRAPHICS PRODUCTS, SERVICES, OR THIS BULLETIN. This limitation of liability applies regardless of
the legal or equitable theory under which such losses or damages are sought.
Warranty Period Matrices – Inkjet
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Warranty Period Matrices – Screen Print
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Warranty Period Matrices – Unprinted Film
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Additional Limitations
See the 3M Graphics Warranties Bulletin at 3MGraphics.com/warranties, for terms, additional limitations of your warranty, if any, information on
reduced warranties for different exposures, and limitations of liability.
Factors that Affect Graphic Performance Life
The actual performance life of a graphic is affected by:
• the combinations of graphics materials used.
• complete ink drying or curing.
• selection, condition and preparation of the substrate.
• surface texture.
• application methods.
• angle and direction of sun exposure.
• environmental conditions.
• cleaning or maintenance methods.
Graphics Manufacturing
! CAUTION
Before using any equipment, always read the manufacturer’s instructions for safe operation.
Product Bulletin 5100R/IJ5100R Release U 5
3M Graphic Film Controltac 3M Reflective Graphic Film Scotchlite
Inkjet Printing
Always read and follow the ink manufacturer’s written instructions on usage.
Total Ink Coverage
• 250% is the maximum recommended total ink coverage for this film for all solvent, latex and UV inks.
Do not exceed the recommended total ink coverage for the ink series used on this product. Having too high a total physical ink amount on the
product results in media characteristic changes, incomplete drying, overlaminate lifting, and/or poor graphic performance. For additional details
about total ink coverage, refer to the 3M Product and Instruction Bulletin for 3M inks or the 3M Performance Guarantee Matrix for OEM inks.
i IMPORTANT NOTE
Be sure to check the consistency of color on reflective film as it may appear different in daytime and nighttime lighting.
Completely Dry Graphics
i IMPORTANT NOTE
Incomplete drying can result in graphic failure including curling, increased shrinkage and adhesion failure, which are not covered under
any 3M Graphic Warranty.
See the ink’s 3M Product and Instruction Bulletin for more details.
Screen Printing
Formulations and processing conditions can affect ink durability. Refer to the Product and Instruction Bulletins for your ink for limitations and
proper usage.
• Solvent ink series 1900 and some colors in the UV ink series 9800 are opaque. Be aware that opaque ink can prevent the film from
retroreflecting in the screen printed areas. Solvent inks series 2900 and the transparent colors from UV ink series 9800 are good choices
when retroreflection is important in the screen printed areas.
• For graphics subjected to fuel vapors or occasional spills, use Solvent ink series 2900 and clear 1920DR.
• Oven dry the last color and the clear when using solvent-based inks on graphics needed for any corrugated application.
Cutting
See 3M Instruction Bulletin 4.1 for Sheeting, Scoring and Film Cutting details.
Graphic Protection
Graphic protection may improve the appearance, performance and durability of the graphic. Click on the graphic protection options listed in the
“Recommended Compatible Products” on page 1 or see the 3M Graphics Market Product Catalog, for more information.
Application Tapes
There are two types of application tapes. See 3M Instruction Bulletin AT-1 to determine what application tape is recommended for your film or
finished graphic.
Premasking Tape
Increases stiffness during application while preventing stretching and damage. Use when little or no liner is exposed. See 3M Instruction Bulletin
4.3 for complete details.
Prespacing Tape
Holds cut and weeded letters or graphics in place during application and after removing the film liner, while preventing stretching and damage.
Use when large amounts of liner are exposed. See 3M Instruction Bulletin 4.3 for complete details.
3M Graphics Warranties
6 Product Bulletin 5100R/IJ5100R Release U
3M Reflective Graphic Film Scotchlite
Application and Installation
i IMPORTANT NOTE
This film is not recommended for use on low surface energy substrates such as some plastics, powder-coated paint, etc. The user must
assume responsibility for testing and approving these substrates.
This film can be applied over other recommended 3M graphic systems. Graphics printed with clear 1920DR must be weathered for at
least one year before applying this film over it. See 3M Instruction Bulletin 5.1 for details.
In addition to other 3M Bulletins specified in this document, the following Bulletins provide details that you may need to successfully apply a
graphic.
• 3M Instruction Bulletin 5.4. Application, Fleet Trucks.
• 3M Instruction Bulletin 5.5. Application, General Procedures for Interior and Exterior Dry Application.
i IMPORTANT NOTE
UV inkjet inks may crack if too much heat is used during graphic application to complex curves and deep contours as well as around
rivets. When using heat during application, make sure the film surface temperature does not exceed 212 F (100 C). For best results,
always do a test application of a printed graphic to determine how much heat can be used without damaging the image.
Pressure-sensitive Adhesive
This film has a pressure-sensitive adhesive. It bonds to the surface even with light pressure and cannot be repositioned.
Maintenance and Cleaning
Use a cleaner designed for high-quality painted surfaces. The cleaner must be wet, non-abrasive, without strong solvents, and have a pH value
between 3 and 11 (neither strongly acidic nor strongly alkaline). See 3M Instruction Bulletin 6.5 for details.
Removal
Removal requires heat and/or chemicals. The ease and rate of removal depends on a number of factors. See 3M Instruction Bulletin 6.5 for
details.
Shelf Life, Storage and Shipping
Shelf Life
The shelf life is never more than 3 years from the date of manufacture on the original box.
If you process the film, the shelf life is changed to 1 year from the processing date, but not later than the 3 year maximum from the manufacturing
date.
Storage Conditions
• 40 to 100 F (4 to 38 C)
• Out of sunlight
• Clean, dry area
• Original container
• Bring the film to room temperature before use
Shipping Finished Graphics
Flat, or rolled printed side out on 6 inch (15 cm) or larger core. This helps prevent the application tape, if used, from popping off.
Product Bulletin 5100R/IJ5100R Release U 7
3M Graphic Film Controltac 3M Reflective Graphic Film Scotchlite
Health and Safety
! CAUTION
When handling any chemical products, read the manufacturers’ container labels and the Safety Data Sheets (SDS) for important health,
safety and environmental information. To obtain SDS sheets for 3M products go to 3M.com/SDS, or by mail or in case of an emergency,
call 1-800-364-3577 or 1-651-737-6501.
When using any equipment, always follow the manufacturers’ instructions for safe operation.
Standards
This information is important for applications that are regulated by ASTM or NFPA® standards, for example, traffic control signs, emergency
vehicles and certain railroad graphics. The user is solely responsible for determining and complying with all current and applicable local, state
and federal regulations regarding the use and application of graphics materials.
ASTM D4956-11a: Standard Specification for Retroreflective Sheeting for Traffic Control
ASTM D4956-11a covers flexible, non-exposed glass bead lenses and microprismatic retroreflective sheeting designed for use on traffic control
signs, delineators, barricades and other devices. For Type I sheeting it specially covers these colors: white, yellow, orange, green, red, blue and
brown. As defined in ASTM D4956-11a, classified as Type I sheeting (section 4.2.1) with a Class 1 adhesive (section 4.3.1). For corresponding
colors covered by ASTM D4956-11a, the aforementioned films (except orange) meet the requirements specified in section 6.1.1 (minimum
performance requirements for Type 1 sheeting).
NFPA ® 1901: Standard for Automotive Fire Apparatus (2009 Edition)
According to NFPA® 1901, section 15.9.3.3 specifies that all retroreflective materials required by section 15.9.3.1 and 15.9.3.2 shall conform
to the requirements of ASTM D4956, Standard Specification for Retroreflective Sheeting for Traffic Control, Section 6.1.1 for Type I sheeting.
Section 15.9.3.3.1 specifies that colors not listed in ASTM D4956 can be used on the front and sides of the fire apparatus as long as the sheeting
has a minimum coefficient of retroreflection of 10 when measured with an observation angle of 0.2 and an entrance angle of -4
AAR: Standard and Recommended Practices
This product is approved for use by the Association of American Railroads (AAR), Safety and Operations, as listed in the Manual of Standards
and Recommended Practices, Section L – Lettering and Marking of Cars, Specification M-947, Adhesive-Backed Films.
Bulletin Change Summary
For the most current 3M Technical Information available to successfully use this product, please view this Bulletin electronically and click on the
blue underlined links to view the relevant documents. Please read the entire Bulletin thoroughly.
Release U DEC-2015:
• Removed warranty period information. This information can now be found using the Warranty Selector, found at

5100R-82P Ruby Red, punched, 15 in x 10 yd
3M ID 75347189617 UPC# 00051128815038
5100R-82P Ruby Red, punched, 15 in x 50 yd
3M ID 75347178362 UPC# 00051128794562
5100R-82P Ruby Red, punched, 30 in x 10 yd
3M ID 75347190367 UPC# 00051128815113
5100R-82P Ruby Red, punched, 30 in x 50 yd
3M ID 75347178370 UPC# 00051128794586
5100R-82 Ruby Red, Miscellaneous Sizes
3M ID 75347096549 UPC# 00000000000000

• 48″ wide, 3M Scotchlite print wrap reflective with new micro Comply Adhesive with non-visible air release channels facilitates ease of application and is highly conformable and repositionable for easier installs
• Excellent retro reflectivity at wider viewing angles
• Designed for vehicle wraps, semi-truck and semi-trailers, motorcycles, wall graphics, and indoor and outdoor signage
• Pressure-activated adhesive for easy sliding and tacking, snap-up and repositioning
• Includes Comply Adhesive for fast, easy bubble-free installations
• Any dark spots can easily be repaired using heat
• 3M suggests laminating with 8528, 8548G, 8549L as well as 8518 and 8519 overlaminates
• Caution:  Always pre-test vinyl installation on vehicles.  Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
• Print compatibility: Solvent, UV, Latex and Screen Print
• The 3M warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage.  Please refer to the Information Sheets below.