UV offset printing – BCI Imaging Supplies

ORAFOL ORACAL 1740 Eco Print Vinyl Transparent Sheets

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 1740 Eco Print Vinyl Transparent Sheets
Description
3.5-mil, polyolefin film made from polypropylene and coated with acrylic enamel for improved printability. Available in gloss
white and transparent.
Release Liner
83# silicone coated paper on one side
Adhesive
Polyacrylate, permanent
Area of Use
For short- and medium-term outdoor advertising. Indoor exposure is almost unlimited.
Technical Data
Thickness (without liner and adhesive) 3.5-mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.16 Temperature Resistance Adhered to aluminum, -40°F to 158°F, no variation Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in Tensile Strength (DIN EN ISO 527) Along: Min. 38 MPa Across: Min. 38 MPa Elongation at Break (DIN EN ISO 527) Along: Min. 130% (transparent), min. 110% (white) Across: Min. 150% (transparent), min. 120% (white) Seawaterability Adhered to aluminum, after 48h/73°F, no variation Shelf Life (68°F/50% relative humidity) 2 years Minimum Life Expectancy Vertical 2 years (unprinted) Minimum Application Temperature 50°F Available Roll Sizes Available Sheet Sizes (Special order only) 40 x 55-yard, 50 x 55-yard, 55 x 55-yard 27 x 20, 27 x 40, 40 x 55 Print Compatibility Screen printing & UV offset printing. Special inks are necessary. Note Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Films with structured surface are naturally more sensitive than the unstructured. Accordingly, these films are to be treated carefully both in processing and in cleaning. Impurities affect the appearance of structured films and require more frequent cleaning. Furthermore the application information published by ORAFOL is to be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number. IMPORTANT NOTICE All ORACAL® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORACAL® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORACAL® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

ORAFOL ORACAL 352-002 Matte Chrome Print Polyester 1 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352-002 Matte Chrome Print Polyester 1 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004
Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class A
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa
Across: Min. 260 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 125%
Across: Min. 80%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
2 years – colors
1 year – gloss gold
Minimum Application Temperature 46°F
Available Lengths
Available Widths
150 (50-yard) and 30 (10-yard)
15 (punched), 24, 30, 48
27 x 38 sheets (100 sheets/ream) White & Transparent
30 x 38 sheets (100 sheets/ream) White & Transparent
Recommended Application Tapes ORATAPE®
Series HT55, MT95, MT72, MT80P
Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352-000 Transparent Print Polyester 1 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352 Transparent Print Polyester 1 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004
Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class A
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa
Across: Min. 260 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 125%
Across: Min. 80%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
2 years – colors
1 year – gloss gold
Minimum Application Temperature 46°F
Available Lengths
Available Widths
150 (50-yard) and 30 (10-yard)
15 (punched), 24, 30, 48
27 x 38 sheets (100 sheets/ream) White & Transparent
30 x 38 sheets (100 sheets/ream) White & Transparent
Recommended Application Tapes ORATAPE®
Series HT55, MT95, MT72, MT80P
Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352-901 Chrome Print Polyester 1 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352 Chrome Print Polyester 1 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004 Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation Fire Behavior (DIN 75200) Fire Rating Adhered to steel, self-extinguishing ASTM E 84-07 Class A Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa Across: Min. 260 MPa Elongation at Break (DIN EN ISO 527) Along: Min. 125% Across: Min. 80% Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation Shelf Life (68°F/50% relative humidity) 2 years Minimum Life Expectancy (based on accepted application procedures on vertical surfaces) 2 years - colors 1 year - gloss gold Minimum Application Temperature 46°F Available Lengths Available Widths 150 (50-yard) and 30 (10-yard) 15 (punched), 24, 30, 48 27 x 38 sheets (100 sheets/ream) White & Transparent 30 x 38 sheets (100 sheets/ream) White & Transparent Recommended Application Tapes ORATAPE® Series HT55, MT95, MT72, MT80P Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352-001 Chrome Print Polyester 1 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352 Chrome Print Polyester 1 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004
Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class A
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa
Across: Min. 260 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 125%
Across: Min. 80%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
2 years – colors
1 year – gloss gold
Minimum Application Temperature 46°F
Available Lengths
Available Widths
150 (50-yard) and 30 (10-yard)
15 (punched), 24, 30, 48
27 x 38 sheets (100 sheets/ream) White & Transparent
30 x 38 sheets (100 sheets/ream) White & Transparent
Recommended Application Tapes ORATAPE®
Series HT55, MT95, MT72, MT80P
Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352-003 Gloss Gold Print Polyester 1 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352 Gloss Gold Print Polyester 1 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004 Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation Fire Behavior (DIN 75200) Fire Rating Adhered to steel, self-extinguishing ASTM E 84-07 Class A Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa Across: Min. 260 MPa Elongation at Break (DIN EN ISO 527) Along: Min. 125% Across: Min. 80% Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation Shelf Life (68°F/50% relative humidity) 2 years Minimum Life Expectancy (based on accepted application procedures on vertical surfaces) 2 years - colors 1 year - gloss gold Minimum Application Temperature 46°F Available Lengths Available Widths 150 (50-yard) and 30 (10-yard) 15 (punched), 24, 30, 48 27 x 38 sheets (100 sheets/ream) White & Transparent 30 x 38 sheets (100 sheets/ream) White & Transparent Recommended Application Tapes ORATAPE® Series HT55, MT95, MT72, MT80P Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352-911 Gloss Gold Both Sides Print Polyester 1 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352 Gloss Gold Both Sides Print Polyester 1 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004 Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation Fire Behavior (DIN 75200) Fire Rating Adhered to steel, self-extinguishing ASTM E 84-07 Class A Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa Across: Min. 260 MPa Elongation at Break (DIN EN ISO 527) Along: Min. 125% Across: Min. 80% Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation Shelf Life (68°F/50% relative humidity) 2 years Minimum Life Expectancy (based on accepted application procedures on vertical surfaces) 2 years - colors 1 year - gloss gold Minimum Application Temperature 46°F Available Lengths Available Widths 150 (50-yard) and 30 (10-yard) 15 (punched), 24, 30, 48 27 x 38 sheets (100 sheets/ream) White & Transparent 30 x 38 sheets (100 sheets/ream) White & Transparent Recommended Application Tapes ORATAPE® Series HT55, MT95, MT72, MT80P Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352-000 Transparent Print Polyester 1 Mil Film Sheets

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352-000 Transparent Print Polyester 1 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004 Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation Fire Behavior (DIN 75200) Fire Rating Adhered to steel, self-extinguishing ASTM E 84-07 Class A Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa Across: Min. 260 MPa Elongation at Break (DIN EN ISO 527) Along: Min. 125% Across: Min. 80% Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation Shelf Life (68°F/50% relative humidity) 2 years Minimum Life Expectancy (based on accepted application procedures on vertical surfaces) 2 years - colors 1 year - gloss gold Minimum Application Temperature 46°F Available Lengths Available Widths 150 (50-yard) and 30 (10-yard) 15 (punched), 24, 30, 48 27 x 38 sheets (100 sheets/ream) White & Transparent 30 x 38 sheets (100 sheets/ream) White & Transparent Recommended Application Tapes ORATAPE® Series HT55, MT95, MT72, MT80P Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352 White Print Polyester 2 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352 White Print Polyester 2 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004 Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation Fire Behavior (DIN 75200) Fire Rating Adhered to steel, self-extinguishing ASTM E 84-07 Class A Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa Across: Min. 260 MPa Elongation at Break (DIN EN ISO 527) Along: Min. 125% Across: Min. 80% Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation Shelf Life (68°F/50% relative humidity) 2 years Minimum Life Expectancy (based on accepted application procedures on vertical surfaces) 2 years - colors 1 year - gloss gold Minimum Application Temperature 46°F Available Lengths Available Widths 150 (50-yard) and 30 (10-yard) 15 (punched), 24, 30, 48 27 x 38 sheets (100 sheets/ream) White & Transparent 30 x 38 sheets (100 sheets/ream) White & Transparent Recommended Application Tapes ORATAPE® Series HT55, MT95, MT72, MT80P Print Compatibility Screen, UV offset, and thermal printing

ORAFOL ORACAL 352 Chrome Print Polyester 2 Mil Film

Joe — Fri, 10 Nov 2023 18:25:25 +0000

ORAFOL ORACAL 352 Chrome Print Polyester 2 Mil Film
Description
1-mil, transparent, white or metallized print polyester film with excellent dimensional stability and good long-term ageing
properties. Roll sizes available in 7 metallic finishes as well as transparent gloss. Screen printing sheet sizes available in
white and transparent gloss only.
Release Liner
98# PE-coated paper on both sides
Adhesive
Clear, solvent-based, permanent adhesive
Area of Use
Ideal for decorative labels, name/technical plates, elements and moldings, and safety decals.
Suitable for use on plotter cutting systems.
Technical Data
Thickness (without liner and adhesive)
1-mil transparent, chrome, matte chrome, gloss gold,
gloss gold on both sides
2-mil white, chrome, chrome brushed
gloss gold on both sides
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.004
Temperature Resistance Adhered to aluminum, -40°F to +248°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class A
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.7 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 200 MPa
Across: Min. 260 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 125%
Across: Min. 80%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
2 years – colors
1 year – gloss gold
Minimum Application Temperature 46°F
Available Lengths
Available Widths
150 (50-yard) and 30 (10-yard)
15 (punched), 24, 30, 48
27 x 38 sheets (100 sheets/ream) White & Transparent
30 x 38 sheets (100 sheets/ream) White & Transparent
Recommended Application Tapes ORATAPE®
Series HT55, MT95, MT72, MT80P
Print Compatibility Screen, UV offset, and thermal printing