3M™ Print Wrap Film IJ180mC-10SLS-410

Description

3M™ Print Wrap Film IJ180mC – 10SLS-410

Comply™ Adhesive with micro technology provides excellent air release with a smooth appearance
Wrappable clear film with slideability, optimized initial tack, non-visible air release and removability for efficient installation and easier removal.
Cast vinyl film.
Recommended Graphics Protection: 8518, 8519, 8520, 8915, 8528, 8548G, 8549L, 8550M, 9740i, 9760LX, 1920DR
Turbocharge your performance with a wrap film that installs faster and looks even better

1. Product Description
A. Product Features
 2‐mil white, vinyl film with a luster finish
 Excellent hiding power
 Pressure-activated adhesive for easy sliding, tacking, snap up and repositioning
 Flexible; conforms to compound curves, corrugations and rivets
– Stretch selected finished graphic constructions up to 130% (i.e., a 10 inch film
piece can stretch to 13 inches) without primer or relief cuts and maintain lift
resistance; see details and exceptions in Section 8.
 Films IJ180C-10 and IJ180Cv3-10 have Comply™ Adhesive air release channels for
fast, easy, bubble-free installations
 Film IJ180Cv3-10 air release channels are non-visible and have improved air release
 Removable with heat and/or chemicals
* Film RG180C-10 are available for purchase and use with only a 3M Basic Product
Warranty on a customer test and approve basis.
B. Recommended Types of
Graphics and End Uses
When constructed and used as described in this Bulletin, these types of graphics and end
uses may be warranted by the 3M™ MCS™ Warranty or the 3M Performance Guarantee.
Please read the entire Bulletin for details.
 Indoor and outdoor graphics and signs, including point-of-purchase and displays
 Commercial vehicles, straight trucks, semi-trucks and semi-trailers; emblems or
striping
 Bus graphics
 Personal vehicle graphics and wraps
 Non-vertical and horizontal vehicle wraps when protected with 3M overlaminates 8528
or 8548G
 Watercraft graphics (above the static water line only)
 Small format original equipment manufacturer’s (OEM) decorative and identification
graphics, cautionary and safety labeling
C. Performance Overview 3M tests the performance of both individual products and finished graphic constructions.
This table shows the best performance expected from this product without a Warranty
Period and with a Warranty Period.
For detailed graphic construction and application options along with specific Warranty
Periods, please see the Warranty Information, Section 5.
Expected Performance Life. This is the estimated period of time the product should perform satisfactorily.
Unprinted film with no graphic protection, applied to a flat vertical outdoor surface. 10 years
Unwarranted Period
3M™ MCS™ Warranty. This is the maximum period of time 3M will warrant the finished graphic performance.
Printed film with the best 3M ink and graphic protection option, applied to a flat, vertical, vehicle type
surface.
7 years
Warranty Period
3M Performance Guarantee. This is the maximum period of time 3M will warrant the performance of the 3M materials used.
Printed film with the best ink and graphic protection option, applied to a flat, vertical, vehicle surface. 4 years
Warranty PeriodProduct Bulletin PIJ180/180C – 2
D. Limitations of End Uses This 3M product is not designed or recommended for the following uses. Please contact us
to discuss other options.
(1) Unsuitable End Uses
for This Film
 Graphics applied to:
– stainless steel (we recommend using 3M™ Controltac™ Graphic Film IJ181
instead)
– non-3M films (see Removal Warranty)
– watercraft when the graphic is below the static water line
– watercraft graphics that are not edge sealed
– painted substrates with poor paint to substrate, or paint-to-paint bond
– substrate surfaces that are not clean and smooth (little or no variation in texture)
 For film with Comply v3 adhesive only: Do not use prespacing tape in cut and
weeded applications where the tape must adhere to the exposed liner.
 Film without graphic protection when they are:
– printed vehicle graphics
– watercraft graphics
– exposed to abrasive conditions, harsh cleaners or chemicals
– horizontally-exposed outdoor applications
 Graphic removal from:
– applications with poor paint-to-substrate adhesion
– existing graphics that must remain intact; damage may occur during removal of film
– watercraft
– outdoor, horizontal applications (except graphics using overlaminate 8528 or
8548G as described in this Bulletin)
 Graphics subjected to gasoline vapors or spills, including those at or on gas pumps,
automobile fuel-tank ports, watercraft or top-feeding, petroleum tankers