GerberColor Special Effects Foils EDGE 1 & 2 GCX12 Jet Black GCX-12

Description

GerberColor Special Effects Foils EDGE 1 & 2 GCX12 Jet Black GCX-12

DESCRIPTION
GerberColor™ Special Effects Series Jet Black (GCX-12) is a durable, dimensionally stable,
resin-based pigmented foil designed for use with the GERBER EDGE®, GERBER EDGE 2®,
and GERBER EDGE FX™ thermal transfer printing systems, in conjunction with EDGE
READY™ materials. With its extra-heavy pigment construction, the gloss level of Jet Black will
appear diminished when compared to standard GerberColor Spot Foils.
Color Name Pigment Code
Jet Black GCX – 12
INTENDED APPLICATIONS
This foil is intended for use in the production of interior or exterior graphics, point-of-purchase
displays, film positives, or any graphics requiring high density black outs. In addition, this foil
can be used for reverse-print and second-surface applications. The user must determine the
suitability of Jet Black for application with electrically illuminated backlit signs.
Most materials that this foil would be printed on are not intended for use where they may be
exposed to petrochemical spillage. If petrochemical contact is anticipated, refer to the section
below on protecting graphics. The user should determine the suitability of all substrates.
PERFORMANCE LIFE
Jet Black has an expected durability of up to four years when applied vertically. Durability
statement is based on accelerated aging using solid fill printing. Actual durability may vary.
Substrate selection, exposure angle, environmental conditions, and maintenance of markings
Page 2 of 4
will affect actual performance. Continuous exposure in regions that experience maximum sunny
days will result in decreased performance. This product is not recommended for horizontal
applications. Due to the extra thickness of the Jet Black pigment, contact with abrasive surfaces
or high-tack tapes, such as cellophane tapes, may split or lift the top portion of the printed
image.
SHELF LIFE AND STORAGE
Shelf life of GerberColor Foils is one year. GerberColor Foils, film, and printed graphics (with or
without pre-mask) should be kept in a clean area free from excessive moisture and direct
sunlight. Store foils at 40ºF to 90ºF (4ºC to 32ºC) and 40% to 60% humidity. When not in use,
cartridges should be kept in their package sleeves.
PRINTING
Halftone blends and fades are not recommended applications for Jet Black Foil. Lot to lot
variations can produce slight visual differences in color output.
Jet black is compatible with all EDGE READY materials.
Jet Black is compatible as the overlayer in overprint combinations with the following
GerberColor Series Foils: GerberColor Spot (GCS), GerberColor Process Pro™ CMYK (GCP),
and GerberColor Transparent (GCT).
Jet black is not recommended for creating GerberColor Spectratone™ matches.
Recommended working environment is as follows:
 Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
 Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
 Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard manufactured by 3M is a durable, dimensionally stable, glossy vinyl
overlaminate. This film has a petrochemical-resistant construction and is intended to be used
when markings may be exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard™ is a custom-formulated, 1-mil, clear, TEDLAR polyvinyl fluoride (PVF)
laminating film designed to further expand the resistance to weathering of printed graphics up to
five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
Page 3 of 4
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of five years (when printed by itself). When applied as a protective
overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the base color
by up to 30%.
Matte Clear is a clear matte finish, top coat GerberColor Foil designed for use with EDGE®
Series thermal transfer printing systems, to reduce glare and protect graphics from moderate
contact or handling. It has an expected performance life of three years.
APPLICATION TECHNIQUES
Gerber standard tack application tape is required for all graphics produced with EDGE Series
printers. Printed graphics should be allowed to cure for 15 minutes prior to the application of
transfer tape.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
PHYSICAL PROPERTIES
Foils
Pigment Resin Based
Coating Thickness 6.3 to 7.3 microns
Liner Thickness 5.7 microns
Foil Length – minimum 45 meters (49.21 yards)
Cartridge
Cores Polyethylene
End Shell ABS Plastic
End Plugs ABS Plastic
Side Rails ABS Plastic
Cartridge Weight 1 lb 12 oz
CHEMICAL RESISTANCE (Printed on Gerber High Performance Series 220)
Chemical Agent Exposure Time Result
Water 24 hours No effect
SAE 20 Motor Oil 24 hours No effect
50/50 Ethylene Glycol/Water 24 hours No effect
Page 4 of 4
Chemical Agent Exposure Time Result
10% Hydrochloric acid 10 minutes No effect
10% Ammonium Hydroxide 10 minutes No effect
Mineral Spirits 10 minutes No effect
Dish Detergent/Water 24 hours No effect
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gspinc.com to learn more about our many other foils, materials and equipment.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, GerberStardust, Gerber StrikeGuard, Gerber Tone,
Gerber UVGuard, GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot,
GSxplus, GSx, ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, ODYSSEY, OMEGA, Process Pro, SpectraShade, and SpectraTint are
Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
3M is a trademark of 3M Company.
TEDLAR is a registered trademark of DuPont.
©2015 Gerber Technology. All Right Reserved
Category: GerberColor Foil FastFact #: 5559 Supplied by: Aftermarkets Last Modified: 09/04/15