•  Sentinel ProMount White Mounting Adhesives.
• ProMount White is a multi-purpose adhesive that is the perfect choice for mounting all your media output.
• Designed with a polypropylene carrier, ProMount White is an opaque, white permanent water-based acrylic adhesive that will adhere to a variety of substrates, including sintra, plexi, foamboard and gatorboard, while offering the benefit of blocking out dark colored boards or light.
• For indoor applications only.
• 3 inch core.

• Seal PrintMount Delta Mounting Adhesive.
• Perfect for mounting wide digital prints, photographs, prints, or posters.
• Features a more aggressive adhesive for a flat, permanent bond.
• Can be used for indoor & short-term outdoor applications.

http://www.neschenamericas.com/websites%5Csealbrands%5Csealweb.nsf/pdflist/Films%20&%20Adhesives/$file/340145%20-%20PS%20Mounting%20Adhesives.pdf

• Seal PrintMount White Mounting Adhesive.
• Print Mount White is a permanent water-based acrylic adhesive that incorporates a white 2 mil polypropylene carrier to prevent bleed through when mounting thin prints or media to black or dark colored substrates.
• Ideal for pre-coating substrates and medis, Print Mount White is for indoor applications only.

http://www.neschenamericas.com/websites%5Csealbrands%5Csealweb.nsf/pdflist/Films%20&%20Adhesives/$file/340145%20-%20PS%20Mounting%20Adhesives.pdf

• Seal PrintMount Plus Mounting Adhesive.
• A premium, permanent solvent-based acrylic adhesive with a clear, 1 mil polyester carrier. It is an excellent adhesive for mounting electrostatic report-grade media and other thin papers.
• Its tacky adhesive permanently bonds to a wide range of substrates.
• Can be used for both indoor & outdoor applications.

http://www.neschenamericas.com/websites%5Csealbrands%5Csealweb.nsf/pdflist/Films%20&%20Adhesives/$file/340145%20-%20PS%20Mounting%20Adhesives.pdf

• Seal Print Mount Ultra Mounting Adhesive.
• A white, opaque, high-tack, solvent-based permanent acrylic adhesive coated on a 1.5 mil white polypropylene carrier.
• This adhesive was designed to hide substrate blemishes and conform to curved surfaces making it an excellent choice for mounting digital media to black rigid boards, such as Gatorfoam, and low surface energy plastics such as polystyrene and Sintra.
• Opaque backing keeps dark substrates and light from showing through. Can be used for both indoor and outdoor applications.

http://www.neschenamericas.com/websites%5Csealbrands%5Csealweb.nsf/pdflist/Films%20&%20Adhesives/$file/340145%20-%20PS%20Mounting%20Adhesives.pdf

• Premium general purpose white mounting film. Features single release liner. Two-sided high peel with good tack. Water-Based Acrylic Adhesive.
• White Mounting Film Permanent/Permanent
  • Good for all general purpose mounting applications
  • Features single release liner
  • Two-sided high peel with good tack
  • Designed for large format digital printing
  Construction
  Product Number: KJMOUNT/WHT/
  Carrier: White Polypropylene – 2.3 mil
  Adhesive: Clear Permanent Acrylic
  Liner: 60# Bleached Kraft
  Product Scheme: 1 Permanent Adhesive
  2 White Carrier
  3 Permanent Adhesive
  4 Liner
  Typical Performance Values
  The following information on physical and chemical characteristics is based upon tests
  believed to be reliable. The values are intended only as a source of information. They
  are given without guarantee and do not constitute a warranty. The purchaser should
  independently determine, prior to use, the suitability of this material for his/her specific
  purpose. (Data represents averages and is not intended for use as a specification.)
  Outdoor Durability: Up to 1 year
  Typical Adhesion Values: 180° Peel Test
  Substrate 24 hours
  Stainless Steel 3 lb/in
  Static Shear (1/2-inchx1/2-inchx500 grams) > 24 hours
  Temperature: 50° F (Minimum for Substrate)
  Service Temperature Range: -40° F to 180° F
  Chemical Resistance: Resistant to detergent, gasoline, HCI – 10%,
  motor oil – SAE 20 and NH40H – 10%.
  Shelf Life: 1 year from ship date when stored in proper
  conditions 70° F and 50% relative humidity

KJMOUNT/WHT/38/200
KJMOUNT/WHT/43/200
KJMOUNT/WHT/51/200

KJMOUNT/WHT/54/200
KJMOUNT/WHT/60/200

Premium general purpose clear mounting film. Features single release liner. Two-sided high peel with good tack. Water-Based Acrylic Adhesive.

• Clear Mounting Film
  Permanent/Permanent Adhesive
  • Good for all general purpose mounting needs
  • Features single release liner
  • Two-sided high peel with good tack
  • Designed for photographic and digital mounting
  Construction
  Product Number: KJMOUNTCLR/PP
  Carrier: Clear Polypropylene – 2.0 mil
  Adhesive: Clear Permanent Acrylic
  Liner: 60# Bleached Kraft
  Product Scheme: 1 Permanent Adhesive
  2 Clear Carrier
  3 Permanent Adhesive
  4 Liner
  Typical Performance Values
  The following information on physical and chemical characteristics is based upon tests
  believed to be reliable. The values are intended only as a source of information. They
  are given without guarantee and do not constitute a warranty. The purchaser should
  independently determine, prior to use, the suitability of this material for his/her specific
  purpose. (Data represents averages and is not intended for use as a specification.)
  Outdoor Durability: Up to 2 years;
  Typical Adhesion Values: 180° Peel Test
  Substrate 24 hours
  Stainless Steel 2.8 lb/in
  Static Shear (1/2-inchx1/2-inchx500 grams) > 24 hours
  Temperature: 50° F (Minimum for Substrate)
  Service Temperature Range: -40° F to180° F
  Chemical Resistance: Resistant to detergent, gasoline, HCI – 10%,
  motor oil – SAE 20 and NH40H – 10%.
  Shelf Life: 1 year from ship date when stored in proper
  conditions 70° F and 50% relative humidity

• Sentinel 3 mil ProGuard UV Calendared UV Laminate.
• Sentinel ProGuard UV pressure-sensitive laminates feature a 3.2 mil UV calendared vinyl coated with an aggressive, permanent acrylic adhesive.
• These laminates create vibrant graphics and offer excellent indoor and outdoor (up to 1-year) durability.
• Available with 78 lb.
• release liners on 3″ cores.

•  Sentinel ProMount Adhesives.
• ProMount is a multi-purpose adhesive that is the economical choice for mounting reprographic media, and digital images, indoor and short term outdoor applications.
• 3 inch core.