Mactac PermaGard Anti-Graffiti Film SAG53 Gloss Hard Coated PET

Description

Mactac PermaGard Anti-Graffiti Film SAG53 Gloss Hard Coated PET
PERMACOLOR® Polyester Overlaminates
PermaGard® Anti-Graffiti Films
Optically clear laminating films which are engineered to protect your images and windows from vandalism and add an
additional layer of safety from flying glass shards in case of breakage.
PERMACOLOR SAG 2.0 mil Hard Coated Protection Laminate
PERMACOLOR SAG 2.0 mil Hard Coated Protection Laminate
Adhesive Category: Optically Clear Adhesive Type: Permanent Acrylic Brand Name: PERMACOLOR Color: Clear Films: Hard Coated Polyester (PET)
PERMACOLOR SAG Anti-Graffiti and Window Protection Film is a durable 2.0 mil hard coated gloss, ultra-clear polyester pressure sensitive film with good UV and abrasion protection.
Adhesive CategoryOptically Clear
Adhesive TypePermanent Acrylic
Brand NamePERMACOLOR
ColorClear
FilmsHard Coated Polyester (PET)
FinishHigh Gloss
Length150′
Liner Category78# White Kraft
Outdoor Durability2 Years
Precise ProgramN
Thickness2.0 mil
SAG 53 High-gloss Clear
Media: 2.0-mil (53 microns) Hard-Coated PET
Adhesive: Clear, Permanent Acrylic Pressure-sensitive
Liner: 78# White Kraft
Features and Benefits:
• Developed to protect graphic images, private
or public transport vehicles and areas (trains,
subways, tramways, buses) that require a gra¸ti
protection.
• Increase the impact resistance of windows
• Solvent resistant so gra¸ti can be easily cleaned
using most commercially available gra¸ti
cleaners without damaging the graphic.
• Do not directly applied on the vehicles but first
laminated to a pressure-sensitive print media.
• Wets out over UV ink jet prints
• UV Protection built in
Typical Uses:
• Private and public transportation vehicles
• Signage
Use with:
• IMAGin Series pgs 8-21
• REBEL Series pgs 24-28
Physical Properties Typical Values
Thickness, inches (µm)
Film plus adhesive 0.0023 (60)
Quick Tack on SS, lb./in2 (N/25mm) 3.2 (14)
Peel Adhesion, lb/in. (N/25 mm)
Stainless Steel – 20 min.
-24 hr
2.5 (11)
3.2 (14)
Adhesive PH Neutral
Temperature Ranges
Application: 50°F to 104° F (10°C to 40°C) for best results
End Use: -40° to 194° F (-40° to 90°C)
Shelf Life:
Two years when stored at 75°F (24°C) and 50% relative humidity
or less. Note: Mactac recommends the rolls be stored
on end or suspended from the core.
Physical Properties Typical Values
Thickness, inches (µm)
Film plus adhesive 0.003 (76)
Quick Tack on SS, lb./in2 (N/25mm) 3.2 (14)
Peel Adhesion, lb/in. (N/25 mm)
Stainless Steel – 20 min.
-24 hr
3.6 (16)
4.5 (20)
Adhesive PH Neutral
Temperature Ranges
Application: 50°F to 104° F (10°C to 40°C) for best results
End Use: -40° to 194° F (-40° to 90°C)
Shelf Life:
Two years when stored at 75°F (24°C) and 50% relative humidity
or less. Note: Mactac recommends the rolls be stored
on end or suspended from the core.
Stock No. Roll Width x Length Weight: Pounds
CYSAG36328 60″ x 328′ 48
Stock No. Roll Width x Length Weight: Pounds
SAG53W54L150 54″ x 150′ 36







SAG53W54L150