Description

ORAFOL ORAGUARD 236 PVC-FREE LAMINATING FILM GLOSS
ORAGUARD® 236 PVC-FREE LAMINATING FILM
Description
2.5-mil, highly transparent, PVC-free, polypropylene-based laminating film with UV protection.
Available in gloss.
Release Liner
55# silicone coated paper
Adhesive
Clear, polyarylate, permanent
Area of Use
For short- to medium-term, flat indoor and outdoor protection of digitally printed general signage and POP/exhibit graphics.
Technical Data
Thickness (without liner and adhesive) 2.5 mil
Temperature Resistance Adhered to aluminum, -40°F to +176°F, no variation
Resistance to solvents and chemicals
At room temperature, 72 hours after adhesion to aluminum,
resistant to water, cleaning agents, alcohol and aliphatic
solvents
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 2.74 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 20 MPa
Across: Min. 20 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 300%
Across: Min. 350%
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces) 2 years
Minimum Application Temperature 50°F
Available Lengths 150 (50-yard)
Available Widths 54
Recommended to be used in combination with ORAJET®
3174
UV Protection Extension Factor +1 year
For best results, utilize ORAFOL ICC profiles available at www.orafolamericas.com and allow solvent-based inks to dry for at least 24 hours
(48-72 hours preferred) at 70°F before cutting the graphic to the ink or applying a laminate