Description

Arlon Series 3310 Extended Life Polyurethane Overlaminate 1.5 Mil Gloss
Series 3310
Multi-Purpose Protection, Long Lasting Durability
An environmentally friendly, premium polyurethane overlaminate, Series 3310 offers the highest standard in protection. With outdoor durability up to 10 years on vertical applications, Series 3310 can be used on digitally printed PVC media and flexible substrates. When compared with similar overlaminates, Series 3310 delivers enhanced clarity, superior conformability, high-gloss levels and extra durability.
Unique Features
Environmentally Friendly Polyurethane Overlaminate
Unmatched Conformability
Extended Life Overlaminate
Face Film Thickness
1.5-Mil (38 Micron)
Finish
Gloss
Adhesive
Permanent (Clear)
Release Liner
Clay Coated
Durability (Unprinted)
10 Years
Roll Widths
54″ / 60″
Roll Length(s)
50 Yards
Series 3310
Extended Life Polyurethane Overlaminate
Series 3310 is a 1.5-mil (38 micron) polyurethane film with a clear, permanent pressure-sensitive adhesive. Along with protecting and prolonging the life of printed images, Series 3310 is designed as a multi-purpose extended life overlaminate, recommended for fleet and vehicle applications. Used as an overlaminate, the outdoor durability is rated up to 10 years vertical exposure and up to 4 years horizontal exposure for Zone 1. Zone 2 horizontal exposure is rated up to 3 years. Zone 3 horizontal exposure is rated up to 18 months.

Applications & Features
Protective overlaminate for digitally printed PVC media and flexible substrates.
Protective overlaminate SLX Cast Wrap, DPF 6100XLP, DPF 6000XRP, DPF 6000RP White, DPF 6500, and DPF 6700.
Fleet graphics and vehicle applications.
Improved clarity than PVC overlaminates.
Superior conformability.
Increased durability & UV protection to extend the life of your graphic.
Arlon overlaminate film is designed to be laminated cold without any heat.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80 Gloss Units
Thickness Micrometer, Federal Bench Type 1.5-mil (38 micron)
Tensile Strength Tensile Tester 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction 19 lb/in 3.4 kg/cm
Elongation Instron Tensile Tester as above 400% to 450%
Shelf Life (In Box) Ideal storage temperature (70°F/21°C) 2 years from factory shipment
Application Temperature Range On clean, dry substrate 60°F to 90°F 16°C to 32°C
Service Temperature Range On clean, dry substrate -40°F to 175°F -40°C to 79°C
Dimensional Stability 158°F (70°C), 48 hours 5-mil 0.12 mm
Peel Adhesion PSTC-1, 15min 70°F (21°C) 3.5 – 4.5 lb/in 0.63 – 0.80 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 37 g/2 in 7.28 g/cm