General Formulations Concept 250 Wall Frog

Description

General Formulations Concept 250 Wall Frog

54″ X 100′

General Formulations Concept 250 Wall Frog
4.0 mil Matte White Polyester Fabric.
• Long term durability, removable up to 6 months.
• Acrylic removable pressure-sensitive adhesive.
• Temporary application of decals and graphics to most types of painted walls.
• Interior use only.
• 90# Stay-flat liner.
• Print compatibility: Solvent, Eco-Solvent, UV Curable, and Latex.

Product Bulletin

Manufacturer of Pressure Sensitive Films,
Traffic Graffic Floor Advertising Films,
Custom Coatings and Printing Inks.

309 S. Union • P.O. Box 158 • Sparta, Michigan 49345 • (616) 887-7387 • (800)253-3664 • FAX (616)887-0537
Web Site: www.generalformulations.com • e-mail: [email protected]

We believe the information on this product to be accurate. However, since we cannot anticipate or control the conditions under which this information or our products may be used, we cannot guarantee
results obtained through their use. Tests of our products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty, either
express or implied. The purchaser should refer to General Formulations, Inc’s Price List for Terms and Conditions or Sale, Including Disclaimer of Warranties and Limitation of Liability.

Concept
®
250
Wall-Frog™ Pressure Sensitive Fabric

Concept®
250 is a 4.0 mil matte white polyester fabric with an acrylic removable pressure sensitive adhesive backed by a
90# sta flat liner. Concept®
250 is formulated and manufactured to be chlorine and phthalate free*. The combination of
fabric and adhesive allows removability of this product from normal wall surfaces. The 90# release liner provides excellent
stability for processing using standard solvent, eco-solvent, UV curable and latex digital inks common to wide format
digital printing systems.

Applications Concept®
250 is designed for temporary application of decals and graphics to most types
of painted interior walls. This includes most flat, semi gloss and gloss paint finishes.
Decals may also be applied to sealed wall coverings. The surface must be smooth and
clean prior to application. Consult with paint manufacturer for correct paint cure time
before applying Concept®
250 to freshly painted surfaces.

Thickness Fabric 4.0 mils.
Adhesive 33.5 G/m2

Liner 6.7 mils.
(Thickness variation +/- 10%)

Dimensional Stability Good.

Temperature Ranges Minimum application temperature +40°F.
Service temperature -40°F to +200 F.

Removability Removable up to 6 months under normal interior exposure conditions and applications.
Removal of wall fabric should be done at a 180° angle while pulling slowly against itself.

Adhesion To standard test panels 4 to 12 oz. /in.
Tested according to PSTC-101 Method A procedures with 24 hour dwell at 70°F and 50%
relative humidity. Typical values. Individual values may vary. Bond to wall surfaces may
vary. Test thoroughly before production.

Storage Stability 6 months shelf life when stored at 70°F and 50% relative humidity.

Product Code Concept®
250-54 54” x 100’
Concept®
250-60 60” x 100’

* Chlorine and phthalates are not intentionally added to the formulation of Concept®
250.
There is a possibility of trace contamination during raw material manufacturing.

Recommendations Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent

penetration resulting in product failure.