General Formulations Concept 210 Removable Traffic Graphic Floor Vinyl

Description

General Formulations Concept 210 Removable Traffic Graphic Floor Vinyl 54″ X 150′

General Formulations Concept 210 Removable Traffic Graphic Floor Vinyl
3.4 mil Calendared White Temporary Floor Graphic Film
• 6 month indoor durability when used with Concept 109 or 211 laminate.
• UL 410 Listed.
• High Performance Acrylic Pressure Sensitive Adhesive.
• Great for temporary floor signs, decals, and point of purchase advertising.
• Print compatibility Solvent and UV Curable.

http://generalformulations.com/PDFs/210%20VFW-FLR.pdf

Product Bulletin

Manufacturer of Pressure Sensitive Films,
Traffic Graffic Floor Advertising Films,
Custom Coatings and Printing Inks.

309 S. Union • P.O. Box 158 • Sparta, Michigan 49345 • (616) 887-7387 • (800)253-3664 • FAX (616)887-0537
Web Site: www.generalformulations.com • e-mail: [email protected]

We believe the information on this product to be accurate. However, since we cannot anticipate or control the conditions under which this information or our products may be used, we cannot guarantee
results obtained through their use. Tests of our products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty, either
express or implied. The purchaser should refer to General Formulations, Inc’s Price List for Terms and Conditions or Sale, Including Disclaimer of Warranties and Limitation of Liability.

Concept
®
210
TRAFFIC GRAFFIC
Ò
BASE VINYL
REMOVABLE ADHESIVE E
ConceptÒ
210 is a specially formulated flexible vinyl with a high performance acrylic pressure sensitive adhesive on a 90# stay-flat
liner. The combination of vinyl and adhesive allows removability of the film from most common commercial tile floor substrates for
up to 6 months under normal exposure conditions. This film is designed to accept a variety of solvent-based inkjet and UV
curable inks common to wide format digital printing systems.

Applications ConceptÒ
210 is designed for temporary floor signs, decals, and point of purchase advertising.
Must use either ConceptÒ
109 or ConceptÒ
211 (overlaminate) to provide protection to the
graphics.

Thickness Film 3.4 mils.
Adhesive 0.8 to 1.0 mils.
Liner 6.7 mils.
(Thickness variance +/- 10%)

Temperature Ranges Minimum application temperature +40° F.
Service Temperature -40° F to +180° F.

Adhesion To stainless steel 8 oz/in.
PSTC-1 with 24 hour dwell at 70 F and
50 % relative humidity. Typical values. Individual values may vary. Test thoroughly before
production.

Removability Up to 6 months from most common commercial tile floors. Floor must be clean before
application. All tiles must be firmly attached to the sub floor. Painted floors must have excellent
adhesion to the sub floor. Test all painted cement floors for adhesion of the paint before
applying a floor decal.

Water Resistance Good. Do not saturate

Humidity Resistance Excellent.

Solvent Resistance Excellent.

Storage Stability 6-months when stored at 70° F and 50% relative humidity.

Product Code 210-54 (54” X 150’ roll)

Recommendations Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent
penetration resulting in vinyl degradation.