Arlon DPF 50WD White

Description

Arlon DPF 50WD White

Arlon DPF 50WD White
3.5 Mil White Removable Window Decal Film.
• Outdoor durability up to 2 years.
• Matte white film with clear low tack removable pressure-sensitive adhesive and premium moisture-resistant polycoated lay-flat liner.
• Great for exterior and interior window advertising, decals and horizontal POP applications (excluding floor graphics).
• Arlon suggests using Series 3420 overlaminates.
• Print Compatibility: Solvent, Eco-Solvent and UV.

http://www.spandex.com/Images/datasheet_DPF%2050WD%20White%20Vinyl%20Film_AUS_tcm35-9307.pdf

DPF 50WD is a 3.5-mil (90 micron) matte white vinyl film with a clear low tack removable pressure-sensitive adhesive. The low tack
adhesive is designed to bond well to glass surfaces while removing cleanly in a wide range or temperatures. DPF 50WD has a
premium moisture stable polycoated lay-flat liner that is optimal for printing on a variety of print systems. DPF 50WD is rated for
outdoor durability up to 2 years (unprinted). Printed durability is dependent on the ink system used.
APPLICATIONS & FEATURES
• Window advertising and decals.
• Displays on high energy substrates such as glass, aluminum or other metals.
• Horizontal POP applications (excluding floor graphics).
• Digital printing with a wide variety of direct print systems, such as solvent, UV, and UV screen.
• Compatible with Series 3220, Series 3200 and Series 3420.
PERFORMANCE & PHYSICAL DATA
*Standard Terms & Conditions Apply Effective Date 10/11
PROPERTY TEST METHODS TYPICAL VALUE
SURFACE FINISH Gloss Meter 60° Reflection ≤ 15%
THICKNESS Micrometer, Federal Bench Type 3.5-mil (90 micron)
TENSILE STRENGTH Tensile Tester 2-in (51mm) jaw seperation; crosshead speed
of 12 in/min. (5.1 mm/s)
14.0 lb/in 2.5 kg/cm
ELONGATION Instron Tensile Tester as above ≥ 75%
SHELF LIFE Free from excessive moisture, temperature, direct sunlight 2 Years
APPLICATION TEMPERATURE
RANGE
On clean, dry substrate 50°F – 90°F 10°C – 30°C
SERVICE
TEMPERATURE RANGE
On clean, dry substrate -20°F – 176°F -29°C – 80°C
DIMENSIONAL STABILITY Shrinkage After 158°F (70°C), 48 hours aging 25 mils 0.635 mm
PEEL ADHESION PSTC-1, 15 min, RT 70°F (21°C) 0.65 lb/in 0.12 kg/cm
LINER RELEASE TLMI Release at 90°, 300 in/min (760 cm/min) 80 g/2 in 16 g/cm
www.arlon.com
USA: 2811 S. Harbor Blvd. Santa Ana, CA 92704 – Telephone: 800-854-0361 – Fax: 714-540-7190
Customer Service: Telephone: 800-232-7161 – Fax: 800-329-2756 – Technical Services: 877-275-6698
EUROPE: Badhuisweg 11 2587 CA Den Haag, The Netherlands – Telephone: +31 (0) 70 354-4311 – Fax: +31 (0) 70 355-7721
INDIA: 4F1 Court Chambers, 35 – New Marines Lines, Mumbai 400 020 – Telephone: +91 99 6755-3895
The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon
products are based on tests believed to be reliable and within the accuracy of the equipment used
to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes
no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace
any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury,
loss or damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing
or printing on the product. Before using, user shall determine the suitability of the product for
its intended use. User assumes all risk and liability of every nature in connection therewith. No
statements or recommendations other than those contained in the technical information published
by Arlon shall have force or effect unless contained in an agreement manually signed by the
officers of seller and manufacturer.