MACtac Print Vinyl JT829P Gloss

Description

MACtac Print Vinyl JT829P Gloss

MACtac Print Vinyl JT829P Gloss
3.1 Mil Bright White Calendered Vinyl Film.
• 4 year outdoor durability.
• Clear, acrylic, permanent adhesive.
• Lay flat polycoated liner.
• Great for interior or medium term exterior signage, decals, nameplates, die-cut letters and POP’s.
• MACtac suggests laminating with CG8000 Series ColorGard™ laminates, or Print Cover PC7200.
• Print compatibility: Solvent, Eco-Solvent.

http://mactac.com/fileadmin/user_upload/Graphic/Performance_Guides/JT829P.pdf
PRODUCT: IMAGin® Printvinyl
JT829P

PRODUCT DESCRIPTION:
JT829P is a 3.1-mil gloss white, soft-calendered PVC film designed for solvent-based ink jet
printing. The product is coated on one side with a clear permanent, acrylic pressure sensitive
adhesive and supplied with a 74# Kraft liner. JT829P is designed for general purpose indoor and
short term outdoor advertising and promotion on flat or slightly curved surfaces.

TYPICAL VALUES*
PHYSICAL PROPERTIES: TEST METHOD

Peel Adhesion, lb. /in. (N/25mm) FTM – 1
180° on Glass – 24 hr. 3.2 – 4.5 (14 – 20)

Quick Tack on SS, lb. /in² (N/25mm) 2.1 – 3.2 (9 – 14) FTM – 9

Dimensional Stability, (%) FTM – 14
48 hours @ 158°F max 1.0 10” x 10” Sample
bonded to aluminum.
Temperature Ranges,
Minimum Application: 40°F (+5°C)
End Use: -5°F to 158°F (-20°C to 70°C)

INTENDED FOR: Wide format, eco-solvent, solvent-based, latex and UV-cured inkjet printing. To
achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings
are used. Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com .
Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software
manufacturer’s websites.

The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of
printing systems, inks and software can significantly affect output. It is the customer’s responsibility to
determine the suitability of any profile for use in their specific print environment.

1) The user is responsible for determining the product’s suitability, including adhesion and if
needed, removal characteristics when used in applications other than listed specifically in
this Performance Guide.

2) If there are any questions about applications, please contact your MACtac sales
representative to discuss your requirements for recommendations.

3) If this is a printed Performance Guide it is an uncontrolled document. Please check the
MACtac website for the latest, most up-to-date version.

IMPORTANT NOTICE: The information given and the recommendations made herein are based on our research and are believed to be accurate, but no
guarantee of their accuracy or completeness is made. In every case, user shall determine before using any product in full scale production, or in any way,
whether such product is suitable for user’s intended use for their particular purpose under their own operating conditions. User assumes all risk and liability
whatsoever in connection with their use of any product. The products discussed herein are sold without any warranty as to merchantability or fitness for a
particular purpose, or any other warranty, express or implied. No representative of ours has any authority to waive or change the foregoing provisions, and
no statement or recommendation not contained herein shall have any force of effect unless in an agreement signed by the officers of seller and
manufacturer. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or
recommendation to practice any invention covered by any patent without authority from the owner of the patent. The following is made in lieu of all
warranties, express or implied: Seller’s and manufacturer’s only obligation shall be to replace or credit such quantity of the product proved to be defective
at its discretion.

TM Trademark of Morgan Adhesives Company.
® Registered Trademark of Morgan Adhesives Company.
www.MACtac.com

DURABILITY: The indoor durability of this film is 5 – 6 years and the outdoor durability of the unprinted
film is up to 4 years. Over lamination of the inkjet-printed material with Permacolor®
overlaminates
minimizes yellowing of the print media delays color fading that may occur over time. This color fading is
mainly dependent upon the inks quality (see technical data sheets given by the ink manufacturers) and the
pressure sensitive media being used.

RECOMMENDATIONS:
Always test your combination of IMAGin products, inks and laminating films prior to commercial use.
1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The
maximum allowable ink saturation is 270%.
2) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 – 48 hr.
drying time – open to the air. Inks do not dry when printed media is rolled up. The prints must be
dry prior to lamination.
3) Laminating Conditions: If the printed graphic is likely to be exposed to corrosive liquids,
smoke, fumes and highly polluted areas or there is a likelihood of scratching, it is highly
recommended to laminate with Permacolor LF3600 series (High Performance), CG8000 series
(intermediate) or PG7000 (economical) overlaminating films. Please be aware that adding an
overlaminate will significantly reduce conformability to complex surfaces.
4) Transportation Conditions: To allow for easy transportation, IMAGin series can be rolled up,
with the image out, with a minimum diameter of 6 inches (15cm). When the image is not
protected by an overlaminate, make sure the print is completely dry and protected in a plastic bag.
During transportation or storage, avoid exposing them to extreme temperature and humidity
changes.

SHELF LIFE:
2 years from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original
package.

* Values given are typical and are not necessarily for use in specification.

CALL 1-800-401-5005 for additional product information