Arlon DPF 4500GX

Description

Arlon DPF 4500GX

Arlon DPF 4500GX
3 Mil Intermediate Gloss Print Media.
• 5 year outdoor durability.
• White permanent adhesive with opaque white vinyl
• Low cost air-egress for permanent applications.
• Great for POP, tradeshow and promo displays.
• Arlon suggests using Series 3420 overlaminates.
• Print Compatibility: Solvent, Eco-Solvent, UV and Latex.

http://www.tekra.com/sites/default/files/digital/DPF%204500GX%20PIB_LR.pdf

DPF 4500GX Vinyl Film
With X-Scape Technology
Intermediate Calendered Digital Print Pressure Sensitive Vinyl Film
DPF 4500GX is constructed of a 3-mil (75 micron) white calendered film offered in gloss and coated with clear bubble releasing,
permanent pressure-sensitive adhesive. The X-scape system allows installers to achieve speedy installation while maintaining high
enough tack to ensure long term bond. The polymeric blend facestock allows for vibrant prints combined with ease of application
for short and medium term graphics. DPF 4500GX is rated for outdoor durability up to 5 years (unprinted). Printed durability is
dependent on the ink system used.
APPLICATIONS & FEATURES
• Digital Printing with a wide variety of direct print systems.
• Short to Medium Term signage, POP displays, kiosks, and tradeshows.

PROPERTY TEST METHODS TYPICAL VALUE
SURFACE FINISH Gloss Meter 60° Reflection 80-90%
THICKNESS Micrometer, Federal Bench Type 3-mil (75 micron)
TENSILE STRENGTH Tensile Tester 2-in (51mm) jaw separation; crosshead speed
of 12 in/min (5.1mm/s)
13 lb/in 2.3 kg/cm
ELONGATION Instron Tensile Tester as Above ≥ 150%
SHELF LIFE Free from excess moisture, temperature, direct sunlight 1 year
APPLICATION TEMPERATURE
RANGE
On clean, dry substrate 50°F to 90°F 10°C to 32°C
SERVICE
TEMPERATURE RANGE
On clean, dry substrate -20°F to 150°F -29°C to 65°C
DIMENSIONAL STABILITY Shrinkage After 158°F (70°C), 48 hours aging 25 mil 635 micron
PEEL ADHESION PSTC-1, 15 min, RT 70°F (21°C) 2.5 lb/in 0.45 kg/cm
LINER RELEASE TLMI Release at 90°, 300 in/min (760 cm/min) 60 g/2 in 11.81 g/cm

The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon
products are based on tests believed to be reliable and within the accuracy of the equipment used
to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes
no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace
any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury,
loss or damage, direct or consequential, arising out of use or the inability to use the product.
Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing
or printing on the product. Before using, user shall determine the suitability of the product for
its intended use. User assumes all risk and liability of every nature in connection therewith. No
statements or recommendations other than those contained in the technical information published
by Arlon shall have force or effect unless contained in an agreement manually signed by the
officers of seller and manufacturer.