Description
Orafol ORAJET 3169 RA
Orafol ORAJET 3169 RA
4 Mil Calendered White Matte or Gloss Inkjet Vinyl With Removable Grey Adhesive.
• 5 Year outdoor durability.
• Grey opaque, solvent, removable adhesive.
• 101lb PE-coated silicone paper liner with Rapid Air technology.
• Ideal for general signage, POP, and partial vehicle wraps requiring limited conformability.
• Perfect for flat indoor and outdoor short- to medium-term applications.
• Match this film with ORAGUARD® Series 210 or 240 laminating films.
• Print compatibility: Solvent, Eco-Solvent, UV, Latex.
ORAJET® Series 3169ra Intermediate Removable
Calendered Digital Media with RapidAir® Technology
Description
4-mil, special PVC film available in white with a gloss or matte surface with RapidAir® Technology
Release Liner
101# PE-coated silicone paper featuring advanced air release technology to facilitate quicker, easier application
Adhesive
Removable, grey, solvent polyacrylate
Applications
For flat indoor and outdoor short- to medium-term applications. Ideal for general signage, POP and short-term (up to one year)
partial box van or trailer graphics requiring limited conformability.
Technical Data
Thickness (without liner and adhesive) 4 mil
Dimensional Stability (FINAT TM-14) Adhered to steel, no shrinkage in cross direction;
In length, <.016”
Temperature Resistance Adhered to aluminum, -40°F to +176°F, no variation
Fire Behavior (DIN 75200)
Fire Rating
Adhered to steel, self-extinguishing
ASTM E 84-07 Class “A”
Adhesive Power (FINAT TM-1, after 24 h, average) Adhered to stainless steel: 1.8 lb/in
Tensile Strength (DIN EN ISO 527) Along: Min. 19 MPa
Across: Min. 19 MPa
Elongation at Break (DIN EN ISO 527) Along: Min. 130%
Across: Min. 150%
Seawaterability (DIN 50 021) Adhered to aluminum, after 100h/73°F, no variation
Shelf Life (68°F/50% relative humidity) 2 years
Minimum Life Expectancy (based on accepted
application procedures on vertical surfaces)
5 years (unprinted)
Minimum Application Temperature 46°F
Available Lengths
Available Widths (inches)
150’ (50-yard)
54
Recommended Laminates ORAGUARD® Series 210, 215, 240
Print Compatibility Latex, Solvent, Eco-Solvent, UV Curable
ORACAL® recommends that printed film be allowed to dry for at least 24 hours at 70°F (48-72 preferred) before applying a laminate
Attention
Recycling Recommendation: Waste class similar to household waste, is to be recycled according to the local regulations.
Surfaces to which the material will be applied must be cleaned thoroughly of dust, grease or any contaminants. Freshly lacquered or painted
surfaces should be allowed to stand for at least three weeks after complete curing. The compatibility of selected lacquers and paints should be
tested by the end-user prior to use.
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of
information and is given without any guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications,
customers should independently determine the suitability of this material for their specific purpose, prior to use.
Reviews
There are no reviews yet.