ORACAL 651 Intermediate Cal Black, White and Clear

Description

ORACAL 651 Intermediate Cal Black, White and Clear

ORACAL 651 Intermediate Cal Black, White and Clear
America’s leading high gloss intermediate film.
• 2.5 mil calendered vinyl.
• Up to 6 year outdoor durability.
• Thermal printable.
• Permanent solvent-based adhesive.
• Blue liner on white vinyl for easy weeding.
• Not edge stripped.
• Most opaque film available.

http://www.uscutter.com/static/PDFs/oracal-651-intermediate-cal.pdf

http://www.nodivision.com/docs/vinylcolors.pdf

Description
Special PVC film with glossy or matt surface.
Release paper
Silicone coated paper on one side, 137 g/m², which provides excellent waste-stripping properties. For white
vinyl a light blue silicone paper is used to form a stronger contrast to lettering.
Adhesive
Solvent polyacrylate, permanent
Area of use
Very good suitable for the use on cutting plotter systems. For short- and medium-term outdoor markings,
letterings and decorations. Indoor exposure is almost unlimited. Glossy surface is additionally suitable for
thermal transfer printing (with resin ribbons).
Thickness* 70 micron
Dimensional stability adhered to steel, no measurable shrinkage in cross direction, in
length 0.4 mm max.
Temperature resistance*** adhered to aluminium, -40°C to +80°C, no variation
Seawater resistance adhered to aluminium, after 100h/23°C no variation
Adhesive power*
(FINAT TM 1, after 24h, stainless steel)
18 N/25 mm
Tensile strength (DIN EN ISO 527)
along min. 19 MPa
across min. 19 MPa
Elongation at break (DIN EN ISO 527)
along min. 130%
across min. 150%
Shelf life** 2 years
Application temperature > +8°C
Service life by specialist application
under vertical outdoor exposure (normal climate of
Central Europe)
Technical data
(FINAT TM 14)
(DIN 50021)
* average
(without protective paper and adhesive)
** in original packaging, at 20°C and 50% relative humidity
black / white: 5 years
transparent / coloured / metallic: 4 years
brilliant blue: 3 years
*** normal climate of Central Europe
Certificates
German General Type Approval (ABG, D5292) acc. to § 22a StVZO (Federal German Road Traffic
Licensing Order);
B1-classification according to DIN 4102-1: Only flame resistant (class DIN 4102-B1) on steel planes.

Attention:
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any
contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should
be allowed to dry for at least three weeks and to completely cure respectively. The compatibility of selected
lacquers and paints should be tested by the user, prior to application of the material. Furthermore the
application information published by ORAFOL is to be considered. The batch traceability according to
ISO 9001 is possible on the basis of the roll number.