Description

3M Scotchcal ElectroCut Graphic Film 7725SE-413 Fluorescent Fuchsia

• 3M Scotchcal ElectroCut Graphic Film 7725SE-413 Fluorescent Fuchsia

• This 3.25 mil,
• permanent, pressure-sensitive film
• available in several vivid fluorescent colors and a paper liner.
• The film can be screen printed as well as electronically cut for eye-catching signs.

http://multimedia.3m.com/mws/media/9502O/7725se-scotchcal-electrocut-fluorescent-sp.pdf-

Electronic Cutting with 3M Graphic Films

3M’s Dusted and Frosted Crystal Film Series 7725SE-300 are now called 3M™ Crystal Films and are available from 3M Architectural Markets, 1. Product Description

3.25 mil (0.08 mm) cast film in 6 glossy, opaque, fluorescent colors

Extremely conspicuous in daylight, and activated by exposure to near ultraviolet light (but not black light)

Offers high attention value under poor visibility, particularly at dawn or dusk

Good electronic cutting characteristics as small as 0.5 inches (12 mm) tall.

Printable with solvent-based screen print inks

Good weather resistance 2. Recommended Types of Graphics and End Uses When constructed and used as described in this Bulletin, these types of graphics and end uses may be warranted by the 3M™ MCS™ Warranty. Please read the entire Bulletin for details.

Prespaced and electronically-cut graphics

High visibility and weather resistant unprinted or screen printed graphics

3. Performance Overview 3M tests the performance of both individual products and finished graphic constructions. This table shows the best performance expected from this product without a Warranty Period and with a Warranty Period.

For detailed graphic construction and application options along with specific Warranty Periods, please see the Warranty Information, Section 3. Expected Performance Life. This is the estimated period of time the product should perform satisfactorily. Unprinted film with no graphic protection, applied to a flat, vertical, outdoor surface. 1 year 3M™ MCS™ Warranty. This is the maximum period of time 3M will warrant the finished graphic performance. Printed film with a clear coat and applied to a flat, vertical, outdoor surface. 1 year 4. Limitations of End Uses A. Do not use the film for these end uses 3M does not normally warrant other uses or applications, but please contact us to discuss your needs or let us suggest other 3M products. Non-vertical applications Application to corrugated surfaces or surfaces with compound curves Thermoforming Using the film where black light fluorescence is required