Avery High Visibility 1200 Reflective

Description

Avery High Visibility 1200 Reflective

Avery High Visibility 1200 Reflective
(Formerly Avery A7)
Reflective Vinyl.
• 5 mil thickness.
• 17 bright bold colors available.
• 7 year durability.
• Engineering Grade Type 1.
• Excellent conformability to simple curves.
• Meets or exceeds Federal ASTM-D-4956-99.
• Never wet-apply Avery Dennison reflective.

 

http://averygraphics-resources.com/PDFs/PD_Sheets/PDS_HV_1200_Permanent_Staflat.pdf

Uses:
Avery Graphics™HV1200 Reflective high
performance vinyl films are premium quality,
enclosed lens, retro-reflective films which
meet or exceed the applicable requirements
ASTM®
D-4956 for reflectivity. Specifically
designed for screen printing as well as use
on computer sign cutting equipment, Avery
Graphics™ HV 1200 Reflective films provide
excellent cutting, weeding, transferring, and
conforming characteristics.

Face: 6.0 mil (152 microns) high
gloss cast film

Adhesive: Permanent Clear
Acrylic

Liner: 90# StaFlat

Durability: Up to 7 years
Vertical exposure ONLY
Application
Surfaces:
Flat, Simple Curves, Flat with
Rivets, Rivets & Corrugations.

Features:
• Long-Term durability and outdoor performance
• Dimensionally stable liner for easy converting
• High gloss finish
• Excellent conversion on CAD plotters
• Screen Printable
• Easy cutting & weeding
• Good dimensional stability
• Good UV, temperature, humidity, and salt-spray resistance
• Meets ASTM®
D4956, Type I (see approved colors below)

Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet

Common Applications:(vertical only)
Fleet
Vehicle
Marine/ Watercraft
Railroad Cars
Bus Graphics
Indoor Signage
Outdoor Signage
Striping
Use of liquid clearcoats (UV, solvent) or protective laminates
may extend the performance of reflective films in non-vertical
applications, but does not change the warranty of the product.

Avery®
HV1200 High Visibility Series
Permanent Staflat
(formerly: A7, NV1300 series StaFlat )
Revision: 4 Dated: 09/25/2009

Product Data Sheet
Page 2 of 6
Graphics & Reflective Products Division
250 Chester Street www.averygraphics.com
Painesville, OH 44077
Physical Characteristics:
Property Value
Caliper, face 6.0 mil (152 microns)
Caliper,
adhesive
1.3 mil (32 µm)
Dimensional
stability
Less than 0.03 in. (0.76 mm)
shrinkage. (1000 hours Atlas
Twin Arc Weatherometer,
EH)
Tensile at Yield 4.0 -8.0 lb/in (0.7 – 1.5 kg/cm)
Elongation 70% min.
Gloss 90% ± 10
Adhesion:
15 min.

3.0 lbs/in (525 N/m)
24 hr. 3.5 lbs/in (770 N/m)
Flammability Self Extinguishing
Shelf-Life 1 year
Durability Vertical
Exposure
Only

Up to 7 years
(Some color fade may occur in severe
environmental areas. Reference IB #1.30
for durability guidelines.

Min. Application
Temperature
50° F (10° C) for flat surfaces
55° F(13° C) for flat with
rivets, rivets, corrugations,
curved surfaces.
Service
Temperature
-40° to +180°F(-40° to +82°C)
(Reasonable range of temperatures which
would be expected under normal
environmental conditions, with intermittent
exposure to temps over 150° F(65°C)
Chemical
resistance
Resistant to most mild acids,
alkalis, and salt solutions.

Important:
Information on physical and chemical
characteristics are based on tests believed to be
reliable. The values are intended only as a source
of information. This information is given without
guaranty and do not constitute a warranty. The
purchaser should independently determine, prior
to use, the suitability of any material for their
specific purpose. (Data represents average values
where applicable, and is not intended for
specification purposes)

Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are
sold with the understanding that Purchaser
has independently determined the suitability of
such products for its purposes. Avery
Dennison products are warranted to be free
from defects in material and workmanship for
either one year (or the period stated on the
specific product information literature in effect
at time of delivery, if longer) from date of
shipment if said product is properly stored and
applied. It is expressly agreed and understood
that Avery Dennison’s sole obligation and
Purchaser’s exclusive remedy under this
warranty, under any other warranty, express or
implied, or otherwise, shall be limited to repair
or replacement of defective product without
charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s
election), or in the event replacement or
repairs is not commercially practical, to Avery
Dennison’s issuing Purchaser a credit
reasonable in light of the defect in the product.

Avery Dennison’s liability for defective
products shall not exceed the purchase price
paid therefore by Purchaser and in no event
shall Avery Dennison be responsible for any
incidental or consequential damages whether
foreseeable or not, caused by defects in such
product, whether such damage occurs or is
discovered before or after replacement or
credit, and whether or not such damage is
caused by Avery Dennison’s negligence.

NO EXPRESS WARRANTIES AND NO
IMPLIED WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE
(EXCEPT AS TO TITLE), OTHER THAN
THOSE EXPRESSLY SET FORTH ABOVE
WHICH ARE MADE EXPRESSLY IN LIEU OF
ALL OTHER WARRANTIES, SHALL APPLY
TO PRODUCTS SOLD BY AVERY
DENNISON. AVERY DENNISON
SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH
WARRANTIES. NO WAIVER, ALTERATION,
ADDITION OR MODIFICATION OF THE
FOREGOING CONDITIONS SHALL BE
VALID UNLESS MADE IN WRITING AND
MANUALLY SIGNED BY AN OFFICER OF
AVERY DENNISON