Mactac Glass Décor 600

Description

Mactac Glass Décor 600

Mactac Glass Décor 600
1.5 mil Polyester Interior Patterned Etch Glass Films
• Five year indoor durability
• Etched glass look without the cost
• Designed for interior design, glass partitions, offices/retail, events
• Tough, durable polyester
• Ultra clear permanent adhesive
• Superior cutting and weeding
• Wet application – use a felt squeegee to avoid scratching

http://www.mactac.eu/datas/products_docs/g/l/glass-decor-600/4c1794e657912-glass-decor-600.pdf

PRODUCT DESCRIPTION
MACal Glass Decor 600 series are transparent PET films
printed with decorative patterns and coated with a
permanent acrylic pressure-sensitive adhesive. The
adhesive is protected with a clear siliconized PET film.
CONSTRUCTION
Face material :
38µm transparent PET film printed with decorative
patterns.
Adhesive :
High quality ultra clear permanent acrylic solvent based
adhesive.
Liner :
Highly stable 38µm transparent PET film.
TYPICAL USES
Glass Decor 600 are design films suited for interior glass
partition or internal window surface.
DURABILITY
5 years.
These use-life estimates are based upon accelerated ageing
studies and outdoor exposure, under conditions
experienced in vertical exposure and in “normal” temperate
climates.
Note : Exposure to severe temperatures and ultraviolet
light, as well as conditions in southern European
countries, and also in tropical, sub-tropical or desert
regions, will cause a more rapid deterioration. This
also applies to polluted areas, high altitude,
horizontal and south-facing exposure.
SHELF LIFE
2 years when stored at 15 to 25°C and ± 50 % relative
humidity.

PHYSICAL PROPERTIES (Typical values)
Thickness (mm) (Film + adhesive) ISO 534
0.060
Face Material Data, 23°C DIN 53455-5
Tensile strength : > 100 N/15mm
Elongation at break : > 100 %
Adhesive Data, 23°C FTM 1
Peel adhesion 180° on stainless steel (N/25 mm)
– 20 min. residence : 13
– 24 hours residence: 17
– 1 week residence: 19
Dimensional stability FTM 14
Shrinkage (48 hours at 70°C) : < 0.2 %
(25 cm x 25 cm, sample mounted on aluminium).
Temperature ranges :
Application : + 10°C to + 40°C
End-use : – 40°C to + 90°C
N.B. : for lower temperatures, please consult us.
Solvent and chemical resistance
Resistant to most oils and greases, fuel, aliphatic solvents,
weak acids, salts and alkalis.
PROCESSING
Application
The Glass Decor 600 film surface is sensitive to scratches.
Therefore, we recommend the film to be applied with a felt
squeegee or alternatively, to use an application tape.
For a better product appearance, application by the wet
method is recommended.

IMPORTANT NOTICE

All MACtac products are subject to careful quality control
throughout the manufacturing process and are warranted
to be of merchantable quality and free from manufacturing
defects.
Published information concerning MACtac products is
based upon research which the Company believes to be
reliable although such information does not constitute a
warranty.
Because of the variety of uses of MACtac products and the
continuing development of new applications, the purchaser
should carefully consider the suitability and performance of
the product for each intended use, and the purchaser shall
assume all risks regarding such use. The seller shall not
be liable for damages in excess of the purchase price of
the product nor for incidental or consequential damages.
All specifications are subject to change without prior notice