Description
FDC Intermediate Utility Grade Reflective Film Green
FDC 2409 Series Utility Grade Reflective Film – This utility grade reflective is for use in non-engineering grade
applications. This film is intended for flat surfaces vehicle markings and striping. To order punched material, use part
number 2459
2409 Series – FDC Intermediate Utility Grade Reflective Film
Film Technology: ………………..
Film Thickness: ……………………. 5.9 mil.
Finish: ……………………………………
Outdoor Durability: ……………… 5 Years
Adhesive/Color: ……………………. P ermanent/Clear
Liner: ………………………………………
Conformability: ………………………..
Shelf Life: …………………………..
Note: For further information regarding: printing, substrate cleaning, application, maintenance, durability
and removal please review the corresponding instructional bulletin available at www.fdcfilms.com.
Warranty: Data provided by FDC is for general information only. This data is not to be used for exacting specification purposes. Always pretest
product. Suitability for any given application is the responsibility of the user. Since FDC cannot control the conditions under which the
products referred to herein may be used or handled, it can make no guarantee as to the effectiveness, safety or applicability with respect
hereto. FDC’s only obligation shall be to replace such quantity of product proven to be defective. FDC shall not be liable for any injury, loss or
damage, direct or consequential, arising out of the use or the inability to use the product. Before using, the user shall determine the suitability
of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. The seller, FDC, shall not be
liable for any default or delay caused by contingency beyond its control or the control of its supplier including but not limited, short or reduced
supply of fuel, or other integral components of the product.
EW
FDC 2409 Series is Intermediate Utility Grade Reflective Film. This utility grade reflective film is
for use in non-engineering grade applications and is intended for flat surfaces, vehicle markings and
striping. To order punched material, use part number 2459.
90# Layflat
Flat Surfaces
1 Year – when stored at temperatures under 73 F and 50% R.H.
Retroreflective
Gloss
Media Color: …………………………..
Blockout: ……………………………….. Yes
Temperature: …………………………. Minimum Application Temperature is 55°F
(*Temperature applies for: graphics, substrate and environment.)
6 Colors – See Color Chart
Elongation: 120%
FDC 24092459