Digi XBee Sensor – ZB – Battery-powered temperature, humidity, and light

Description

Digi XBee Sensor – ZB – Battery-powered temperature, humidity, and light
XS-Z16-CB2R
XBee Sensors are compact, battery powered environmental sensors for ZigBee networks. They provide real-time temperature, light and humidity information for a variety of applications including building automation and security, energy management, food management, freight and vehicle monitoring, and many more.

Installation is easy. Simply insert batteries, add the XBee sensor to the ZigBee network, and configure the update interval. Next, mount the device in an out-of-the way location and start communicating. Their small form factor and long-life battery power make XBee Sensors easy to integrate with Digi’s Drop-in Networking solutions to provide reliable, unobtrusive communications, without the need for a wired network infrastructure.

XBee products are part of Digi’s unsurpassed range of Drop-in Networking solutions, offering users seamless wireless communication between devices, including modules, adapters, routers and gateways. XBee embedded modules deliver wireless connectivity to remote devices. XBee adapters provide wireless connectivity to electronic devices in wired networks. XBee wall routers extend the range of a ZigBee network. XBee XTenders provide long-range backhaul and data conversion between 2.4 GHz and 900MHz. ConnectPort® X gateways enable users to access remote devices in a ZigBee network.

Features
Compact, battery powered sensors with integrated ZigBee®
Real-time temperature, humidity and light information
Easy installation and configuration for rapid deployment
Long battery life for reliable operation
Small size for unobtrusive installation
Features
General
Frequency: 2.4 GHz (ISM)
Internal antenna
Performance
Indoor/Urban range: 133 ft (40 m)
Outdoor RF line-of-sight range: 400 ft (120 m)
Transmit power output: 1.25 mW (+1 dBm) / 2 mW (+3 dBm) boost mode
RF data rate: 250,000 bps
Receive sensitivity (1% PER): -97 dBm (-98 dBm boost mode)
Networking and Security
Networking topologies: Point-to-Point, Point-to-Multipoint, Peer-to-Peer, Mesh
Number of channels: 16 – 5 MHz channels (Direct Sequence Spread Spectrum)
Filtration options: PAN ID, Channel, 2^64 (64-bit) addresses
LEDs
Power: Solid when powered and not associated to network.
Associate: Blinks when unit is associated to network Push Button
Device reset
Configuration reset to factory defaults
Identification/Commissioning mode
Integrated Sensors
Temperature Sensor
Range: -18° C to 55° C (-0.4° F to 131° F)
Accuracy: +/- 2° C
Ambient Light Sensor
Range of spectral bandwidth: 360 to 970 nm (similar to human eye)
Wavelength of peak sensitivity: 570 nm
Humidity Sensor
Range: 0 to 100% RH
Interchangeability:
+/- 5 %RH (0% RH to 59%RH)
+/- 8 %RH (60% RH to 100%RH)
Accuracy: +/- 3.5% RH
Environmental
Operating temperature: -18° C to 55° C (-0.4° F to 131° F)
Power requirements: 3 x AA alkaline 1.5V batteries (batteries not included)
Interfaces
ZigBee – compatible with:
Digi XBee ZNet 2.5 (formerly Series 2) module
EmberZNet 2.5x mesh stack
Regulatory Approvals
FCC Part 15, Class B
EN55022 Class B, EN 55024
RoHS Compliant
Dimensions
Length: 2.70 in (6.85 cm)
Width: 2.50 in (6.35 cm)
Height: 1.30 in (3.30 cm)
Weight: 0.35 lb (0.158 kg) w/batteries, 0.20 lb (0.091 kg) without batteries
Line Art
XBee Sensor – Front
http://www.digi.com/support/