Digi XBee-PRO XSC S3B, 900 MHz, 250mW, U.FL ant connector, 9600 bps (*MOQ May Apply)

Description

Digi XBee-PRO XSC S3B, 900 MHz, 250mW, U.FL ant connector, 9600 bps (*MOQ May Apply)
XBP9B-XCUT-001

The Digi XBee-PRO XSC 900 MHz RF module features two times the throughput and 20 times less current draw than the previous XSC module, making it ideal for long-range sensor applications. The RF module features an ADF7023 transceiver from Analog Devices, delivering best-in-class distances up to 28 miles Line-of-Sight (LOS)*, along with low power consumption, drawing less than 2.5 uA in power down.

The latest Digi XBee-PRO XSC (S3B hardware) is firmware compatible with the legacy 9XStream® and the legacy Digi XBee-PRO XSC modules.

Digi’s free X-CTU configuration utility simplifies the configuration of the XSC module, which requires no programming. In addition, it can be easily configured via a simplified AT command set. The RF modules are pre-certified for North America and Australia, further reducing development costs and time to market.

Features

For new designs that do not require interoperability with 9XStream radios, see XBee-PRO 900HP
Over-the-air compatibility with legacy 9XStream products
20 times less current draw than previous XSC module
Superior outdoor LOS range of up to 28 miles*

The Digi XBee-PRO XSC 900 MHz RF module features two times the throughput and 20 times less current draw than the previous XSC module, making it ideal for long-range sensor applications. The RF module features an ADF7023 transceiver from Analog Devices, delivering best-in-class distances up to 28 miles Line-of-Sight (LOS)*, along with low power consumption, drawing less than 2.5 uA in power down.

The latest Digi XBee-PRO XSC (S3B hardware) is firmware compatible with the legacy 9XStream® and the legacy Digi XBee-PRO XSC modules.

Digi’s free X-CTU configuration utility simplifies the configuration of the XSC module, which requires no programming. In addition, it can be easily configured via a simplified AT command set. The RF modules are pre-certified for North America and Australia, further reducing development costs and time to market.