Digi XBee S2C 802.15.4, 2.4GHz, SMT (PCB Ant) (*MOQ May Apply)

Description

Digi XBee S2C 802.15.4, 2.4GHz, SMT (PCB Ant) (*MOQ May Apply)
XB24CAPIS-001
Digi XBee RF modules provide OEMs with a common footprint shared by multiple platforms, including multipoint and ZigBee/ Mesh topologies, and both 2.4 GHz and 900 MHz solutions. OEMs deploying the XBee can substitute one Digi XBee for another, depending upon dynamic application needs, with minimal development, reduced risk and shorter time-to-market.

Digi XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint/star configurations, Digi XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial communication, or as part of a more complex hub-and-spoke network of sensors, Digi XBee 802.15.4 RF modules maximize performance and ease of development.

XBee 802.15.4 modules seamlessly interface with compatible gateways, device adapters and range extenders, providing developers with true beyond-the-horizon connectivity.

The updated Digi XBee S2C 802.15.4 module is built with the SiliconLabs EM357 SoC and offers improved power consumption, support for over-the-air firmware updates, and provides an upgrade path to DigiMesh® or Zigbee® mesh protocols if desired.

Features
Simple, out-of-the-box RF communications, no configuration needed
Point-to-multipoint network topology
2.4 GHz for worldwide deployment
Common XBee footprint for a variety of RF modules
Industry leading sleep current of sub 1uA
Firmware upgrades via UART, SPI or over the air
Migratable to DigiMesh and Zigbee PRO protocols and vice-versa
Turnkey development available from Digi WDS
Documentation
PDF Getting Started Guide
PDF User Guide
Digi XBee S2C Zigbee Digi XBee-PRO S2C Zigbee Digi XBee S2D Zigbee
PERFORMANCE
TRANSCEIVER CHIPSET Silicon Labs EM357 SoC Silicon Labs EM357 SoC Silicon Labs EM3587 Soc
DATA RATE RF 250 Kbps, Serial up to 1 Mbps
INDOOR/URBAN RANGE* Up to 200 ft (60 m) Up to 300 ft (90 m) Up to 200 ft (60 m)
OUTDOOR/RF LINE-OF-SIGHT RANGE* Up to 4000 ft (1200 m) Up to 2 miles (3200 m) Up to 4000 ft (1200 m)
TRANSMIT POWER 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode 63 mW (+18 dBm) 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode
RECEIVER SENSITIVITY (1% PER) -100 dBm / -102 dBm boost mode -101 dBm -100 dBm / -102 dBm boost mode
FEATURES
SERIAL DATA INTERFACE UART, SPI
CONFIGURATION METHOD API or AT commands, local or over-the-air (OTA)
FREQUENCY BAND ISM 2.4 GHz
FORM FACTOR Through-Hole, Surface Mount Through-Hole, Surface Mount Surface Mount
INTERFERENCE IMMUNITY DSSS (Direct Sequence Spread Spectrum)
ADC INPUTS (4) 10-bit ADC inputs
DIGITAL I/O 15
ANTENNA OPTIONS Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire SMT: RF Pad, PCB Antenna, or U.FL Connector
OPERATING TEMPERATURE -40º C to +85º C
DIMENSIONS (L X W X H) AND WEIGHT Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) Through-Hole: 0.960 x 1.297 in (2.438 x 3.294 cm)
SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm) SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)
PROGRAMMABILITY
MEMORY Standard: N/A
Programmable: 32 KB Flash/2 KB RAM Standard: N/A
Programmable: 32 KB Flash/2 KB RAM N/A
CPU/CLOCK SPEED Standard: N/A
Programmable: HCS08/up to 50.33 MHz Standard: N/A
Programmable: HCS08/up to 50.33 MHz N/A
NETWORKING AND SECURITY
PROTOCOL Zigbee PRO 2007, HA-Ready with support for binding/multicasting
ENCRYPTION 128-bit AES
RELIABLE PACKET DELIVERY Retries/Acknowledgements
IDS PAN ID and addresses, cluster IDs and endpoints (optional)
CHANNELS 16 channels 15 channels 16 channels
POWER REQUIREMENTS
SUPPLY VOLTAGE 2.1 to 3.6V 2.7 to 3.6V 2.1 to 3.6V
TRANSMIT CURRENT Standard: 33 mA @ 3.3 VDC/45 mA boost mode
Programmable: 47 mA @ 3.3 VDC/59 mA boost mode Standard: 120 mA @ 3.3 VDC
Programmable: 120 mA @ 3.3 VDC 33 mA @ 3.3 VDC / 45 mA boost mode
RECEIVE CURRENT Standard: 28 mA @ 3.3 VDC/31 mA boost mode
Programmable: 42 mA @ 3.3 VDC/45 mA boost mode Standard: 31 mA @ 3.3 VDC
Programmable: 45 mA @ 3.3 VDC 28 mA @ 3.3 VDC / 31 mA boost mode
POWER-DOWN CURRENT Standard: <1 μA @ 25º C
Programmable: 1.5 μA @ 25º C Standard: <1 μA @ 25º C
Programmable: 1.5 μA @ 25º C <3 μA at 25º C
REGULATORY APPROVALS
FCC, IC (NORTH AMERICA) Yes Yes Yes
ETSI (EUROPE) Yes No Yes
RCM (AUSTRALIA AND NEW ZEALAND) Yes Yes No (Coming Soon)