45111 – 20 LB ENGINEERING BOND ON A 3″ CORE – MEDIA AND E1 TONER BUNDLES

Description

45111 – 20 LB ENGINEERING BOND ON A 3″ CORE – MEDIA AND E1 TONER BUNDLES

20lb RECYCLED BOND – contains 30% post consumer waste

Recycled media that will meet and exceed the needs of reprographers, end users and resellers, not only for Océ equipment, but for all major manufacturers plotters and printers.

Product Description:
45111 – 20 LB ENGINEERING BOND ON A 3″ CORE – MEDIA AND E1 TONER BUNDLES Océ PlotWave® printers, Océ Copy Press, the new Océ CrystalPoint® technology, in the Océ ColorWave® 650 printers, and other xerographic equipment. Meets government specifications, for post consumer waste content. Improved whiteness and print contrast. Océ recycled bond has excellent toner adhesion, copy quality, and is environmentally friendly. Recycled media is made from30% post-consumer waste. The cores are made from 100% OCC (old corrugated containers).

Specifications:

Physical Properties:

• Basis Weight – 20 lb.
• Brightness – 92%
• Opacity – 89%
• Whiteness – 145 CIE
• Smoothness – 160
• Acid Free, Elemental Chlorine Free
* Target Values

Features:

• Improved whiteness
• Improved print contrast
• Excellent toner adhesion
• Excellent copy quality
• Environmentally friendly
• Cores are made from 100% OCC
• Media contains 30% post consumer waste

benefits:

• Requires 60% less energy to make than
virgin paper
• 1 ton of recycled pulp saves 4,000 KWH
of energy, 7,000 gallons of H2O and 17
trees

 recommended storage conditions and shelf life:

 • Temperature 55°-90° F. (20°-50° C).
Relative Humidity 30-70%
• Shelf life-2 years when stored at proper
conditions
• Allow material to stabilize to room conditions
24 hours before use.

environmental, health & safety:

• No Material Safety Data Sheet required.
• Waste is suitable for recycling.

main applications:

• Recycled bond for use when government
compliance for recycled content is required.
Can be used on large format digital plotters
and printers.

Printer compatibility:

Océ 45111R is recommended for use in radiant fusing printing equipment, Océ PlotWave® printers, Océ Copy Press technology; including the Océ TDS Series printers and other xerographic equipment. Also recommended for use with the new Océ Crystal-Point® technology in the Océ ColorWave® 650 printer.

Processing tips:

• Outside of the roll is side to be printed.
• Print in a dust and dirt free environment
55°-90° F. (10°-35° C), 20-90% R.H.

 

item number width X length Quantity Per
carton core
4511100185 18” x 650’ 1Rolls 3”
4511100037 22” x 650’ 1 Rolls 3”
4511100045  24” x 650’ 1 Rolls 3”
4511100349 30” x 650’ 1 Rolls 3”
4511100055
4511100077  36” x 650’ 1 Rolls 3”

 

4511100078
4511100328

 

 

 

45111R 20lb. recycled engineering bond