Description
6ft High Speed HDMI® Cable with Ethernet and Rotating Connectors – 4K 30Hz
Connect a 4K enabled device with an HDMI output to the HDMI input of a monitor, projector or HDTV to display audio and video content up to a 4K resolution
5.0
|
1 Review
Product # :
50622
Connector 1 :
(1) HDMI Male
Connector 2 :
(1) HDMI Male
Lengths :
6ft3ft10ft
Description Features Specs Support
Product Features
Supports all HDMI 1.4 features including resolutions up to 4K (4096 x 2160 at 30Hz, 4:4:4)
Rotating HDMI connectors
High Speed HDMI Cable
24-karat gold plated contacts
Product Description
The High Speed HDMI Cable with Ethernet and Rotating Connectors supports all HDMI 1.4 features and is the perfect solution for connecting a multimedia source device to a display. The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection for accessing interactive online content or updating device firmware. The rotating connectors on this cable allow it to be installed in tight spaces for support of a wall mounted HDTV. Experience the latest HDMI features including:
4K (2160p), which is 4 times the clarity of 1080p/60 video resolution
3D video, Deep Color and x.v. Color
Dolby® True HD, DTS-HD Master Audio and up to 32 audio channels for a multi-dimensional immersive audio experience
Up to 1536kHz audio sample frequency for the highest audio fidelity
Simultaneous delivery of dual video streams to multiple users on the same screen
Simultaneous delivery of multi-stream audio to multiple users (up to 4)
Support for the wide angle theatrical 21:9 video aspect ratio
Dynamic synchronization of video and audio streams
CEC extensions for control of consumer electronics devices through a single control point
High quality materials and construction ensure a lifetime of dependable performance. Fully-shielded conductors provide complete immunity to EMI/RFI interference, and 24-karat gold-plated connectors ensure superior signal transfer. This fully-functional, high-bandwidth cable is tested to perform at industry standards and is backed by a lifetime warranty.
Note: Both the source device and display must support a HDMI feature in order to pass that feature through this cable
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like
3ft Computer 18 AWG Power Cord Extension (IEC320C14 to IEC320C13) (TAA Compliant)
$4.99
7ft Cat5e Snagless Unshielded (UTP) Ethernet Network Patch Cable – Purple
$3.99
7ft Cat5e Snagless Unshielded (UTP) Ethernet Network Patch Cable – Pink
$3.99
3ft High Speed HDMI® to Micro HDMI Cable with Ethernet
$10.99
7ft Cat5e Snagless Unshielded (UTP) Ethernet Network Patch Cable – Red
$3.99
7ft Cat5e Snagless Unshielded (UTP) Ethernet Network Patch Cable – Gray
$3.99
7ft Cat5e Snagless Unshielded (UTP) Ethernet Network Patch Cable – Orange
$3.99
Product Specifications
Color : Black
Length : 6.00 Foot
Jacket Rating : Standard Non-Rated
UPC : 757120506225
Warranty : Lifetime
Vendor : C2G
Weight : 0.239 LB
HDMI Specification: 1.4
Electrical Characteristics
Nominal Impedance – 100 ± 10?
Nominal Capacitance – 90pF/m
Nominal Velocity of Propagation – 5.6ns
DC Resistance – 376.96M?/km
Dielectric Strength – AC 500V – 1 minute
Insulation Resistance – 100M?
Physical Characteristics
Voltage Rating – 30V
Minimum Bend Radius – 9.0mm
Temperature Rating – 80°C
Temperature Range – 0° – 80°C
Approvals – RoHS Compliant
Warranty – Lifetime
Package Type – Polybag
Conductor 1 (5pair)
Conductor Type – 30AWG (1/0.254), Tinned Copper
Insulation – Foamed PE + SKIN, Red/White, Brown/White, Blue/White, Green/White, Black/White, O.D. – 0.65mm
Drain Wire – 30AWG (1/0.254), Tinned Aluminum
Shield – Foil, 100% Coverage
Conductor 2 (4 conductors)
Conductor Type – 30AWG (1/0.254), Tinned Copper
Insulation – HDPE, Yellow, Red, Green, Purple, O.D. – 0.70mm
Connector
Connector Type: HDMI® – Type A Rotating
Pin Construction: Copper
Plating: 15µm Gold
Insulation: PBT + 30% Glass Fiber
Hood – ABS, Black
Dimensions (HxWxL) – 9.7 x 21.1 x 57.8mm
Connector Depth at 90° – 30.4mm
Connector Height at 90° – 49.4mm
Overall Cable
Drain Wire – 30AWG (1/0.254), Tinned Aluminum
Foil Shield – Aluminum, 100% Coverage
Braided Shield – 16/8/0.10, Tinned Aluminum, 85% Coverage
Jacket – PVC, Black, O.D. – 6.0mm
Product Support
Downloads
Download the technical specifications
Downloads
Download the technical specifications
Michael (verified owner) –
Very well worth the money.
Ryker (verified owner) –
Very well worth the money.