2×2 Drop in Ceiling Speaker – 8? – Plenum Rated

Description

2×2 Drop in Ceiling Speaker – 8? – Plenum Rated
Deliver clear, crisp audio reinforcement from this drop 8? in ceiling speaker.
0 Reviews

Product # :
41508
Description Features Specs Support
Product Features
• 8 inch outer diameter dual cone speaker with 100° coverage angle
• 5 oz. magnet with an 8 Ohm impedance
• Plenum rated enclosure
• Seismic tie-off points
Product Description
The Plenum-Rated 2×2 Drop In Ceiling Speaker is specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This speaker is designed to mount in the drop-ceiling frame that is often present in classrooms. Available in an industry standard 8 Ohm version, this speaker ensures long life and quality sound. The Plenum-Rated 2×2 Drop In Ceiling Speaker integrates seamlessly with an Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the A/V controller and RapidRun® for a complete connected classroom. This ceiling mount speaker provides a clean, unobtrusive look while dispersing sound down to students at 100 degrees for full classroom coverage.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
1m LC-ST 50/125 OM2 Duplex Multimode Fiber Optic Cable – Plenum CMP-Rated – Orange
$35.99
20-pin Female IDC Flat Ribbon Connector
$0.99
HDMI® and VGA + Stereo Audio to HDMI HDBaseT over Cat Extender Kit (TAA Compliant)
$912.99
12ft 18 AWG Outlet Saver Power Extension Cord (NEMA 5-15P to NEMA 5-15R) (TAA Compliant)
$8.99
50ft 3.5mm Stereo Audio Cable With Low Profile Connectors M/M – In-Wall CMG-Rated
$20.99
6in Value Series™ One 3.5mm Stereo Female To Two RCA Stereo Male Y-Cable
$5.99
6ft 18 AWG 3-Slot Laptop Power Cord (NEMA 5-15P to IEC320C5) (TAA Compliant)
$5.99
Product Specifications
Color : White
UPC : 757120415084
Warranty : 3 Years
Vendor : C2G
Weight : 7.320 LB
Electrical Specifications

• Average Sensitivity: 92 dB SPL, 1W/1M
• Loudspeaker Power Rating: 12W RMS EIA 426A Standard
• Maximum Output: 15W @ 8 Ohms
• Calculated Output: 102 dB-SPL 12W/1M
• Frequency Response: 65 Hz – 17 kHz EIA 426A Standard
• Nominal Coverage Angle: 100° Included Angle -6 dB / 2 kHz, Half space

Physical Specifications

• Audio Connection: 6” Leads
• Magnet Type & Weight: BeFe Ceramic, 5 oz. Nominal
• Weight: 6.05 Lbs
• Dimensions (HxWxD): 87.31 x 508.96 x 508.96mm
Product Support
Downloads

• Download the manual