2U 19in Tool-Less Snap-In Filler Panel Multipack (2 pack) (TAA Compliant)

Description

2U 19in Tool-Less Snap-In Filler Panel Multipack (2 pack) (TAA Compliant)
Fills an open rack unit in racks and cabinets where separation of cold air and hot air is required

Product # :
14632
Description Features Certifications Specs Support
Product Features
• Available in 1U and 2U sizes
• Snaps into 19in EIA/ECA-310-E compliant tapped or 3/8in square hole mounting rails without modification
• Patent pending design does not require field modification to fit a tapped hole
• Specially designed clips snap into mounting rails as thick as 0.187in (typ. EIA rack) or as thin as 0.078in (some server cabinets)
• Ridges along the top and bottom rear edges of the panel make a seal without creating a tolerance build when using multiple filler panels
Product Description
This tool-less snap-in filler panel is an ideal solution to fill open rack units in racks and cabinets where separation of cold air and hot air is required. These panels are designed to be installed without tools and snap-in to 19in EIA/ECA-310-E compliant tapped or 3/8in square hole mounting rails without modification. The patent pending design does not require field modification to fit a tapped hole and the panel can be swapped back and forth between cabinets or racks with tapped or square holes as necessary. The specially designed clips allow the panels to snap into mounting rails as thick as 0.187in (typical EIA rack) or as thin as 0.078in (some server cabinets).These panels are designed to work effectively with equipment and flat, angled or curved patch panels. Ridges along the top and bottom rear edges of the panel make a seal without creating a tolerance build when using multiple filler panels.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
5/8 x 72in Vertical Grounding Bar Kit (TAA Compliant)
$121.99
Vented Equipment Shelf (TAA Compliant)
$102.99
1U Cable Pass-Through Panel with Brush Strip (TAA Compliant)
$39.99
Wall Mount Shelf (TAA Compliant)
$59.99
6in Single-Sided Vertical Cable Management Cage with Cover (TAA Compliant)
$269.98
2u (3.5in) Cable Management Panel with 5 D-Rings
$37.99
U-Type Cable Management Support Bar (TAA Compliant)
$19.98
Product Certifications
Product Specifications
Color : Black
UPC : 757120146322
Warranty : 5 years
Vendor : C2G
Weight : 1.040 LB
Physical Characteristics

• Dimensions (HxW): 1.75 x 19.00in
• Minimum mounting hole requirement: #10 or 0.375in square
Product Support
Downloads

• Download the spec sheet
• Download the dimensional drawing