Nikkalite Reflective Fluorescent Yellow-Green H8594 24″ X 50 Yds.

Description

Nikkalite Reflective Fluorescent Yellow-Green H8594 24″ X 50 Yds.
Fleet Marking Grade
Fluorescent Yellow-Green H8594
1. INTRODUCTION
NikkaliteTM Brand H8500 Series retroreflective sheeting is designed for use in vehicle markings, stickers, decals, etc. H8500
is fluorescent in color and that makes it an excellent for sign board and safety product tape. H8500 series sheeting is able to
be either digital-printed or screen-printed with superior quality.
The sheeting is flexible and easy to apply to curved or corrugated surfaces. Coated with pressure sensitive adhesive, and
protected by easily removable liner, the sheeting is highly resistant against the extremes of hot, cold, dry and humid
weathering conditions.
2. PERFORMANCE MEASUREMENTS
The minimum retroreflective values of the NikkaliteTM H8500 sheeting are given in Table-1 below. Measurements shall be
conducted in accordance with ASTM D4956 Specification. Totally wet by rain ,the reflective value of H8500 series sheeting
will not be reduced by more than 10% of the values specified in Table-1below.
EFFECTIVE PERFORMANCE LIFE
Based on numerous tests and past experience, finished license plates of NikkaliteTM H8594 sheeting, applied on the treated
aluminum plate and processed as recommended, will perform effectively without remarkable color fading, sheet peeling,
blistering, or cracking for 3 years.
4. STORAGE
Retroreflective sheeting, inks, thinner, etc. should be stored between 15°C to 25°C, ideally with a relative humidity of 30% to
60%, and out of direct sunlight. Retroreflective sheeting and inks should be used within one year after purchased. Do not leave
full or open rolls of material resting on hard surfaces; this may cause bruising to the retro-reflective material, which may not be
seen until exposed to a light source.
5. CAUTION
Read through First Aid, Health Hazard and Precautionary statements mentioned in the Material Safety Data Sheet
(MSDS) of correlated products such as printing inks, thinner, treatment agents, etc. prior to handling or use.
cautioned to undertake their own test/tests to determine the suitability of a particular product for the intended application.
6. RELIABILITY
All recommendations and technical information contained herein are based on experience and tests, which the manufacturer
believes to be reliable, but their accuracy and completion are not warranted. The user is cautioned to undertake their own
test/tests to determine the suitability of a particular product for the intended application.
7. WARRANTY
NikkaliteTM Products are warranted to be free from defects in materials and workmanship at the time of their sale. Except as
herein above expressly warranted, NikkaliteTM products are sold without any warranty whatsoever, including warranties of
merchantability or fitness for a purpose. The sole remedy for failure of NikkaliteTM products to conform to said warranty is the
replacement of the defective products; neither the manufacturer nor the seller shall be liable for any loss, damage or injury,
direct or indirect or incidental, arising from the use or inability to use said NikkaliteTM products.
Technical Data
Material Safety Data Sheets (MSDS)