Description
PSA 5 mil Wall Graphics Gloss White Film – Clear Ultra Removable Adhesive
Clear low peel removable adhesive. Gloss white film for applications that require easy removability from smooth surfaces such as painted drywall. Print edge-to-edge–no border needed around printed graphics. Compatible with OEM Solvent and Mild Solvent Ink–24 hour cure time recommended before cutting.
Adhesive Backed 5 mil Gloss White Film
Clear Ultra Removable Adhesive, 90# Lay Flat Liner
for Solvent, Latex & UV Printers
• For applications that require easy removability from smooth surfaces such as
painted drywall
• Print to edge – no border needed around printed graphics
• Compatible with OEM Solvent, Latex & UV Curable Inks – 24 hour cure time
recommended before cutting
Construction
Product Number: SOL/WALLGRAPIX
Adhesive: Low Peel Removable Acrylic
Film: 5 mil Semi Rigid Film
Liner: 90# Lay Flat
Finish: Gloss White
Gloss Level: 62(avg.) @ 60°
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They
are given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific
purpose. (Data represents averages and is not intended for use as a specification.)
Durability: Recommended for indoor use. Removable
up to one year under normal interior
conditions. Please test first for outdoor
applications.
Minimum Application Temperature: +50° F (Minimum for Substrate)
Service Temperature Range: -40° F to +180° F
Chemical Resistance: Resistant to distilled water and detergent.
Poor resistance to alkalies, mild acids, most
petroleum based oil, grease and aliphatic
solvents and salts.
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 1.5 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity.