Description

PSA 3 mil Matte White Vinyl GRAY TINT- Clear Permanent Adhesive

Clear permanent adhesive. New whiter matte vinyl for graphics needing minimal light reflection.

Adhesive Backed 3 mil Matte White Vinyl
Permanent Adhesive
for Solvent, Latex & UV Printers
• Can be used for interior and exterior signage
• Uses include outdoor signage, promotional and point of purchase graphics, trade
show display
• Compatible with OEM Solvent, Latex & UV Curable Inks
Construction
Product Number: SOL/MATCAL
Adhesive: Clear Permanent Acrylic
Film: 3 mil Vinyl
Liner: 88# Lay Flat Liner
Finish: Matte White
Gloss Level: >10 (avg.) @ 60°
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They
are given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific
purpose. (Data represents averages and is not intended for use as a specification

Durability: Outdoor -5 years unprinted
Minimum Application Temperature: +50° F (Minimum for Substrate)
Service Temperature Range: -40° F to +180° F
Temperature Resistance: -65° F to + 225° F
Chemical Resistance: Resistant to alkalies, mild acids, most
petroleum based oil, grease and aliphatic
solvent and salts.
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 3.0 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity