SKYSCRAPER CORNER UPRIGHT, 72″ SILVER

Description

SKYSCRAPER CORNER UPRIGHT, 72″ SILVER
Skyscraper Mounts™
Sturdy Support For 1/2″ Rigid Graphics
Product sold in pairs include two uprights and two oval steel bases
Graphic is secured with headless set screws on one side of each upright
Buy pairs of uprights or mix and match individual uprights to design your own exhibits, displays or rooms
For wider spans there are connection center uprights, SKCU
For corners enclosures, there are 90º angle assemblies, SKRA
For triangular enclosures, there are 60º angle assemblies, SKTR
For “T” configurations, SKTU
For 4-way center Quad configurations, SKQD
Extremely attractive 1″ x 2″ race track oval aluminum uprights
Weighted steel bases, Oval 8″ x 17″ or 9″ Round
Portable, strong, lightweight
Available in Satin Silver (-S)
Simple 5 minute assembly
View graphics front & back
Graphics can extend beyond upright top
A 24″ extension kit, SKMMC2 is available for additional height.
Each upright model includes base
96″ uprights are in 2 sections
Stand can be used with graphics up to 8′ high. Substrate, environment, and other factors can effect maximum appropriate height. Test your media to ensure stability before use.
Recommended Maximum Graphic Width: 60″
May be used with thinner media by further tightening set screws
Uprights 96″ will be in 2 sections
Matte Black available on a project basis. Extra cost applies
Graphic Information:
For rigid graphics 1/2″ thick
May be used with thinner media by further tightening set screws
First hole from top is 8″ down
First hole from bottom is 8″ up
Intermediate holes are approximately spaced 13-1/2″ apart
Minimum graphic height: 14″

Model Description
SKMM6 72″ single sided upright, sold in pairs.
SKMM7 84″ single sided upright, sold in pairs.
SKMM8 96″ single sided upright, sold in pairs.

SKCU6 72″ double sided Center upright, each.
SKCU7 84″ double sided Center upright, each.
SKCU8 96″ double sided Center upright, each.

SKRA6 72″ Right angle upright, each.
SKRA7 84″ Right angle upright, each.
SKRA8 96″ Right angle upright, each.

SKRA6 72″ Triangular upright, each.
SKRA7 84″ Triangular upright, each.
SKRA8 96″ Triangular upright, each.

SKTU6 72″ “T” upright, each
SKTU7 84″ “T” upright, each
SKTU8 96″ “T” upright, each

SKX6 72″ 4-way Quad upright, each
SKX7 84″ 4-way Quad upright, each
SKX8 96″ 4-way Quad upright, each

SKMMC2 24″ Upright extension kit

SKMS6 72″ single sided upright, each
SKMS7 84″ single sided upright, each
SKMS8 96″ single sided upright, each
Servicing a wide range of industries and offering robust reseller discounts, Testrite is very proud to be an American manufacturer with an extraordinary reputation for quality, value and reliability. We source the finest quality components, and because we manufacture in the U.S., our supply chain is shorter, ?greener?, and we can offer customizable solutions tailored to your needs.

Imagine the Possibilities
SKRA6·S