Description

15 mil PSA Velvet Polycarbonate Laminate

Film offers protection from UV, abrasion and moisture. Non-glare finish great for trade show and display graphics.

Adhesive Backed 15 mil Velvet Polycarbonate
Laminate
• Non-glare, very high clarity film
• High UV/Fade resistance
• High scuff and abrasion resistance
• Velvet surface hides scratches and fingerprints
• Outstanding laminate for displays and point of purchase graphics
Construction
Product Number: KJ15VPC
Adhesive: Clear Permanent Acrylic
Film: 15 mil Polycarbonate
Liner: 1.5 mil Polyester
Gloss Level: 15 (avg.) @ 60°

Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They are
given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific
purpose. (Data represents averages and is not intended for use as a specification.)
Durability: Outdoor – up to 2 years
Minimum Application Temperature: +50° F (Minimum for Substrate)
Service Temperature Range: -40° F to 176° F
Chemical Resistance: Resistant to ammonium hydroxide – 10%,
detergent, distilled water, gasoline and
hydrochloric acid – 10%.
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 2.75 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity.