RITRAMA Window Cal III Opaque 3.5 Mil Gloss White Opaque

Description

RITRAMA Window Cal III Opaque 3.5 Mil Gloss White Opaque
features a gray permanent adhesive designed
for short to medium term promotional graphics
while the gray removable adhesive for promotional
applications requiring removable adhesive
performance. These films are well suited for
applications such as Point-of-Purchase,
Product Identification Labels, as well as
Outdoor and General Signage.

BCI Imaging Supplies
RITRAMA Window Cal III Opaque 3.5 Mil Gloss White Opaque
Product Data Sheet

Uses:
Ritrama WINDOW CAL III OPAQUE is a 6 mil gloss white opaque adhesive film. It can be used as a 1-sided or 2-sided window graphics (together with Window Cal III Clear).

gray removable adhesive for promotional
applications requiring removable adhesive
performance. These films are well suited for
applications such as Point-of-Purchase,
Product Identification Labels, as well as
Outdoor and General Signage.
Face: 3.0 mil (76 microns)
Gloss
Adhesive: Acrylic
Ritrama WINDOW CAL III OPAQUE is a 6 mil gloss white opaque adhesive film. It can be used as a 1-sided or 2-sided window graphics (together with Window Cal III Clear).

• Easy to handle liner for trouble free converting

Conversion:
• Thermal Die-Cutting
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
• Solvent based inkjet
• Mild/Eco Solvent inkjet
• UV inkjet
• Latex Inkjet
Note: Product is not recommended for use on drum digital printers or sheet-fed conversion.
Common Applications:
• Wall Murals
• POP/ Tradeshow
• Outdoor Signage • Floor Graphics

PRODUCT DESCRIPTION
6.0-mil gloss white opaque film with white-pigmented adhesive designed for use as 2-way window graphics
(when used with 3-7104), cover-up labels, decals or other applications requiring an ultimate opaque stock.
Can be used with reversed printed 3-7104 (gloss clear vinyl with solvent removable adhesive) to produce
Ritrama’s WindowCal III™: excellent economical media used for interior and exterior 2-way window
advertisements.
This white film is metallized on one side and coated with a white-pigmented adhesive to achieve ultimate
opacity.
APPLICATIONS
 Multiple color two-way window graphics
 Interior and exterior windows
FEATURES AND BENEFITS
 Used for interior or exterior windows.
 Compatible with various printing methods including solvent, eco-sol and latex inkjet.
 Available at 54” and 60” wide.
 Can be plotter cut to edge of graphics with no lifting. “Print-to-edge” approved.
 Ritrama recommends at least 24 hours of cure time before laminating and cutting.
 Ultimate opacity with white on both sides of film
TECHNICAL DATA
Face Material 6.0-mil ultimate opaque film
Color and Finish Gloss white, backside metallized
Adhesive 81W pigment white permanent solvent
Liner 72#
TYPICAL CHARACTERISTICS
Target Adhesion Values 15 min. 24 hr.
(PSTC-1, 180° peel @ 12”/min., 73°F, on Stainless Steel) 2.6 lbs./inch 3.2 lbs./inch
Minimum Application Temperature 50°F
Service Temperature Range -40°F to +180°F
Shelf Life (@ 73°F, 50% RH) 1 year
Outdoor Life Up to one year
CHEMICAL RESISTANCE
Distilled Water (24 hr) No Effect
Detergent (24 hr) No Effect
10% HC1 (10 min) No Effect
10% Ammonium Hydroxide (10 min) No Effect
Gasoline (1 hr) No Effect .

Warranty:
This Warranty applies to the Product listed in this Data
Sheet. All statements, technical information (including
physical and chemical characteristics) and recommendations

believed to be reliable but do not constitute a guarantee or
warranty.
responsible for, and has independently determined, the
suitability of such products for its purposes or its customer’s
purposes.
material and workmanship (i) for two years
from the date of manufacture, or (ii) from the date of
manufacture until the expiration of the period stated on the
specific Product Data Sheet in effect at the time of delivery..
Such time periods are subject in either case to the proper
storing and application of said product, and the failure to
properly store or apply the product, including without
limitation the failure to follow any applicable Instructional
Bulletin, negates any warranty. It is expressly agreed and
understood that
Purchaser’s exclusive remedy under this warranty, under
any other warranty, express or implied, or otherwise, shall be
limited exclusively to: (a) repair or replacement of defective

in the event repair or replacement are not commercially
practical, a credit amount up to the price of the product
taking into account the defect in the

.
All sales and contracts for sale of Products are subject to
Purchaser’s assent and agreement to this Warranty
any kind from the Purchaser that is conflicting, inconsistent
or additional to this Agreement

Ritrama WINDOW CAL III OPAQUE is a 6 mil gloss white opaque adhesive film. It can be used as a 1-sided or 2-sided window graphics (together with Window Cal III Clear).

4-0175-54