Description

Fluorescent Vinyl  BLUE

Fluorescent cast vinyl film for short-term exterior safety, promotional and high visibility applications. Fluorescent pigments used in these films typically fade in direct sunlight, thus it is suggested that they be used only for short- term markings up to 6 months.

Fluorescent vinyls, available in 6 colors, offer excellent weedability and conform best to flat surfaces

deal fdeal for short-term exterior safety, promotional and high visibility applications. Fluorescent pigments used in these films typically fade in direct sunlight, thus it is suggested that they be used
only for interior, or for short-term exterior markings of 6 months or less duration. Excellent weedability, conforms best to flat surfaces. Use with Kapco® Premask™ Plus or Kapco® Premium Transfer
Tapes.
Construction
Thickness: 2.2 mil
Adhesive: Permanent, white, Acrylic Pressure Sensitive Adhesive
Release Liner: 78# imprinted bleached kraft
Physical Properties
The following information on physical and chemical characteristics is based upon tests believed
to be reliable. The values are intended only as a source of information. They are given without
guarantee and do not constitute a warranty. The purchaser should independently determine,
prior to use, the suitability of this material for his/her specific purpose. (Data represents averages
and is not intended for use as a specification).
Outdoor Durability: 6 months* expected
Application Temperature: +40° F
Service Temperature Range: +50° F to 180° F
Chemical Resistance: Resistant to most petroleum based oils, greases and aliphatic
solvents. Resistant to mild acids, alkalies and salt.
Typical Adhesion Values: 180° Peel Test Substrate 24 hrs
Stainless Steel 4.5 lbs/in
Note: Tested per ASTM 1000. Always pretest your specific
substrate prior to actual application.
Shelf Life: 1 year at temperatures under 73° F 50 ± 5% R.H.
Dimensional Stability: <0.015” shrinkage after 72 hrs
*NOTE: Extreme environmental conditions will shorten product life.