MPO/MTP Fiber Optic Cable – Plenum-Rated – OM3, 40Gb – Push/Pull-Tab – 3 m (10 ft.)

Description

MPO/MTP Fiber Optic Cable – Plenum-Rated – OM3, 40Gb – Push/Pull-Tab – 3 m (10 ft.)
Terminate twelve fiber connections using a single 40 Gigabit network cable — designed for high-density fiber networks
Interface between different networking devices at varying speeds
Optimize accessibility and install or remove connectors with one hand using the push-and-pull tabs
MTP connectors use Type A straight-through pinout
Show more
This MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual 10Gbps devices.

The MTP connector provides twelve times the density of an SC connector and saves circuit card and rack space. Plus, the push-and-pull tabs optimize accessibility by letting you install or remove the connectors with one hand without needing additional tools.

The MTP to MTP cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire rating is required.

Each OM3 fiber cable has been individually tested for insertion loss and return loss. The full test report is included in each cable bag.

The MPO12PL3M from StarTech.com is backed by a lifetime warranty.
MPO12PL3M
Cables|Network Cables & Adapters|Fiber Optic Cables & Adapters