Description

Avery MPI3901 Promotional Removable

Avery Dennison MPI 3901 Non-PVC 2.6 Mil 1yr

Avery Dennison® MPI 3900 Series
Semi-Gloss
Clear Removable Kraft
Revision: 1 Dated: 04/03/17
Product Data Sheet
Page 1 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Uses:
Avery Dennison MPI 3900 Semi-Gloss Series
are environmentally responsible alternative
films compared to traditional self adhesive
PVC films. Avery Dennison MPI 3901 offers a
clear removable adhesive for short term
promotional applications requiring removable
adhesive performance. These films are
especially well suited for applications such as
Point-of-Purchase, Product Identification
Labels, as well as Indoor & Outdoor Graphics,
General Signage and Posters.
Face: 2.6 mil Polyolefin
(65 microns) Semi-Gloss
Adhesive: Acrylic
MPI 3901 – Removable (clear)
Liner:
Clay-Coated Kraft (Removable)
Durability: Up to 1 year
Application
Surfaces:
Flat, simple curves
(restricted to non-spill areas)
Features:
• Consistent Print Performance resulting in vibrant images every time
• Excellent image clarity and color pop
• Easy to handle liner for trouble free converting
• ICC profiles available on the Avery Dennison website (https://avery-us.color-base.com )
• The film contains no PVCs or plasticizers, eliminates any halogen related disposal
concerns and has a solvent free adhesive.
Conversion:
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
• UV Inkjet • Latex Inkjet (Compatible
with HP Latex ink 821, 831, 871,
881 and 891)
Note: Product is not recommended for use for sheet-fed conversion.
Common Applications:
• Wall Murals • POP/ Tradeshow • Outdoor Signage

Avery Dennison® MPI 3900 Series
Semi-Gloss
Clear Removable Kraft
Revision: 1 Dated: 04/03/17
Product Data Sheet
Page 2 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Physical Characteristics:
Property Typical Values
Caliper, face 2.6 mil (65 µm)
Caliper, adhesive 1.0 mil (25 µm)
Dimensional
stability
<0.030”(0.762 mm)

Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile @16%
Tensile @ Break
15 lb/in (2.6 kg/cm)
21 lb/in (3.7 kg/cm)
Elongation Min 100%
Gloss Hunter Gloss
@ 60
70 GU ±10

Adhesion: 15 min Removable 1.0-2.0 lb/in (175-350 N/m)
24 hr Removable 1.5-3.0 lb/in (263-525 N/m)
Removability MPI 3901 1 year from most
substrates.

Shelf-Life 2 years from date of
manufacture
when stored at the following
temperatures and humidity
conditions 68°-77° F (20° – 25°
C) and 50±5% R. H.
Durability Vertical
Exposure
Up to 1 year
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Data represents average values where applicable, and is not
intended for specification purposes.
Warranty:
This Warranty applies to the Product listed in this Data
Sheet. All statements, technical information (including
physical and chemical characteristics) and recommendations
about Avery Dennison products are based upon tests
believed to be reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold subject to the
Purchaser’s assent and agreement that Purchaser is
responsible for, and has independently determined, the
suitability of such products for its purposes or its customer’s
purposes. Avery Dennison products are warranted to be free
from defects in material and workmanship (i) for two years
from the date of manufacture, or (ii) from the date of
manufacture until the expiration of the period stated on the
specific Product Data Sheet in effect at the time of delivery..
Such time periods are subject in either case to the proper
storing and application of said product, and the failure to
properly store or apply the product, including without
limitation the failure to follow any applicable Instructional
Bulletin, negates any warranty. It is expressly agreed and
understood that Avery Dennison’s sole obligation and
Purchaser’s exclusive remedy under this warranty, under
any other warranty, express or implied, or otherwise, shall be
limited exclusively to: (a) repair or replacement of defective
product without charge at Avery Dennison’s plant or at the
location of the product (at Avery Dennison’s election), or (b)
in the event repair or replacement are not commercially
practical, a credit amount up to the price of the product
taking into account the defect in the product in Avery
Dennison’s sole discretion.
THE WARRANTY EXPRESSLY SET FORTH ABOVE IS IN
LIEU OF ANY OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR USE AND/OR NONINFRINGEMENT. SELLER SPECIFICALLY DISCLAIMS
AND EXCLUDES ALL OTHER SUCH WARRANTIES. NO
WAIVER, ALTERATION, ADDITION OR MODIFICATION
OF THE FOREGOING CONDITIONS SHALL BE VALID
UNLESS MADE IN WRITING AND MANUALLY SIGNED BY
AN OFFICER OF AVERY DENNISON.
AVERY DENNISON’S LIABILITY FOR DEFECTIVE
PRODUCTS SHALL NOT EXCEED THE PURCHASE
PRICE PAID THEREFORE BY PURCHASER AND IN NO
EVENT SHALL AVERY DENNISON BE RESPONSIBLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
WHETHER FORESEEABLE OR NOT, CAUSED BY
DEFECTS IN SUCH PRODUCT, WHETHER SUCH
DAMAGE OCCURS OR IS DISCOVERED BEFORE OR
AFTER REPLACEMENT OR CREDIT, AND WHETHER OR
NOT SUCH DAMAGE IS CAUSED BY AVERY
DENNISON’S NEGLIGENCE.
All sales and contracts for sale of Products are subject to
Purchaser’s assent and agreement to this Warranty. Avery
Dennison hereby objects to any terms or conditions
contained in any purchase order or other communication of
any kind from the Purchaser that is conflicting, inconsistent
or additional to this Agreement
Avery Dennison® MPI 3900 Series
Semi-Gloss
Clear Removable Kraft
Revision: 1 Dated: 04/03/17
Product Data Sheet
Page 3 of 3
graphics.averydennison.com
Customer Service: 800-282-8379
Removability:
Avery Dennison does not guarantee removability from the following substrates:
• Surfaces with poor paint-to-substrate adhesion
• Wallboard
• Existing graphics that must remain intact; damage to existing graphic when film is removed
• Aged paint or metal that may have surface oxidation or chalking
• Outdoor, horizontal surfaces
Related Documents:
The following Avery Dennison literature will provide complete information to the user for proper application, storage, and
other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison®
website (www.graphics.averydennison.com).
Document Title Reference Number
Premask Recommendations Instructional Bulletin #5.50
Printing, Processing, and Application Instructions for Interior Wall Graphics Instructional Bulletin #6.50
Expected Durability & Lamination Requirements
Description Unprinted
Durability
Printed
Expected Durability
Laminate
MPI 3901 Semi-Gloss Removable 1 year Up to 1 year Not required. Compatible with DOL
3000 series or DOL 6560 Gloss
Additional Notes:
Avery Dennison does not warrant damage to the interior wall surface caused by removing film even if a
removable adhesive was used. Removing a graphic can cause damage to the wall. Due to the variety of wall
surfaces Avery Dennison® cannot guarantee damage free removal. The amount of damage can be reduced or eliminated
by following the inspection, cleaning and preparation guidelines provided in Instructional Bulletin #6.50.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corporation

Custom Finish – CTO A112770 MPI3901 GLOSS REM KR 60″
Custom Finish – CTO A112768 MPI3901 GLOSS REM KR 54″
Stock A006433 MPI3901 GLOSS REM KR 54X50 YDS 3IN
Stock A006434 MPI3901 GLOSS REM KR 60X50 YDS 3IN
Sample A010532 MPI3901 GLOSS REM KR 54X5