Description

10 MIL TEXTURED VINYL LAMINATE

Cost effective alternative to polycarbonate. Use for point of purchase, exhibit booths at tradeshows, roll-up banner stands, retail counter-top and mouse pad advertising. Special pebble textured surface provides scratch resistance and cuts down on glare.

Kapco® Product Data Sheet
Adhesive Backed 10 mil Pebble Vinyl Laminate
• Use for point of purchase, exhibit booths at tradeshows, roll-up banner stands,
retail counter-top and mouse pad advertising.
Construction
Product Number: KJ10PEBBLE
Adhesive: Clear Permanent Acrylic
Film: 10 mil Soft Textured Vinyl
Liner: 4.6 mil (78# C1S Liner)
Finish: Pebble Texture
Gloss Level: 20 (avg.) @ 60°
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They
are given without guarantee and do not constitute a warranty. The purchaser should
Durability: Outdoor – up to 1 year
Minimum Application Temperature: +40° F (Minimum for Substrate)
Service Temperature Range: -40° F to +180° F (-46° C to + 82° C)
Temperature Resistance: -65° F to + 225° F
Chemical Resistance: Resistant to alkalies, mild acids, most
petroleum based oil, grease and aliphatic
solvent and salts
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 3.0 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity.
page 1/2
1000 Cherry Street, Kent, Ohio 44240 • Fax (800) 451-3724
Toll Free (800) 791-8963 • Local (330) 678-1626
www.kapco.com • [email protected]
05/21
1000 Cherry Street, Kent, Ohio 44240 • Fax (800) 451-3724
Toll Free (800) 791-8963 • Local (330) 678-1626
www.kapco.com • [email protected]
Standard Warranty
All statements, technical information and recommendations about Kapco products are based upon
tests believed to be reliable but do not constitute a guarantee or warranty. All Kapco products are
sold with the understanding that the Purchaser has independently determined the suitability of such
product for its purposes. Kapco products are warranted to be free from defects in material and workmanship for either one year (or the period stated on the specific product information literature in effect
at time of delivery, if longer) from date of shipment if said product is properly stored and applied. It is
expressly agreed and understood that Kapco’s sole obligation and Purchaser’s exclusive remedy under
this warranty, under any other warranty, express or implied, or otherwise, shall be limited to repair or
replacement of defective product without charge at Kapco’s plant or at the location of product (at
Kapco’s election), or in the event replacement or repairs is not commercially practical, to Kapco’s
issuing Purchaser a credit reasonable in light of the defect in the product.
Kapco’s liability for defective products shall not exceed the purchase price paid therefore by Purchaser and in no event shall Kapco be responsible for any incidental or consequential damages whether
foreseeable or not, caused by defects in such product, whether such damage occurs or is discovered
before or after replacement or credit, and whether or not such damage is caused by Kapco’s negligence.
No express warranties and no implied warranties, whether of merchantability or fitness for any particular
use, or otherwise (except as to title) other than those expressly set forth above which are made expressly in lieu of all other warranties, shall apply to products sold by Kapco. Kapco specifically disclaims
and excludes all other such warranties, no waiver, alteration, addition or modification of the foregoing
conditions shall be valid unless made in writing and manually signed by an officer of Kapco.
page 2/2
Kapco® Product Data Sheet

KJ10PEBBLE

KJ10PEBBLE/51
KJ10PEBBLE/54