Avery Dennison HP Pro Automotive window tint HP Pro 15 15% VLT

Description

Avery Dennison HP Pro Automotive window tint HP Pro 15 15% VLT
Product Overview
HP Pro
Automotive Window Film
High Performance
Hybrid Metal-Dye
Avery Dennison® HP Pro hybrid metal-dye
automotive window film offers exceptional
shrink capabilities and high solar protection in
a sleek charcoal color tone for drivers who want
appearance, comfort and impressive performance.
Features and Benefits
? Up to 71% Selective Infrared Rejection
? Minimal reflective effect with
up to 94% glare reduction
? Darker tints provide privacy
for passengers and contents
? Easier stock handling with a
printed liner that shows footage
remaining on the roll
Avery Dennison®
Series HP Pro
High-Performance Hybrid
Technology Hybrid Metal-Dye
UV Stable Dye
Color Tone Charcoal
Construction 2-Ply Weatherable
Thickness 1.5 Mil
Warranty Lifetime, Limited Non-Transferable1
Color Stable Yes
HP Pro Product Overview
graphics.averydennison.com
For information on warranty terms, exclusions and certain limitations that apply please see our website: graphics.averydennison.com
All statements, technical information and recommendations about Avery Dennison products are based upon tests and information believed
to be reliable but do not constitute a guarantee or warranty of any kind. All Avery Dennison products are sold with the understanding that
the Purchaser has independently determined the suitability of such products for its intended and other purposes.
©2023 Avery Dennison Corporation. All rights reserved. Avery Dennison® is a registered trademark of Avery Dennison Corporation.
Avery Dennison brands, product names, antenna designs and codes or service programs are trademarks of Avery Dennison Corporation.
A444572 01/2023
Optical & Solar Properties2
Film Ultraviolet
Block
Visible Light Glare
Reduction
Selective
Infrared
Rejection3
Infrared
Energy
Rejection4
Shading
Coefficient
Total Solar Energy
Transmitted Reflected
(Exterior) Reflected Transmitted Absorbed Rejected
HP Pro 05 >99% 5% 8% 94% 71% 51% 0.44 8% 16% 76% 64%
HP Pro 15 >99% 15% 7% 83% 54% 40% 0.55 7% 30% 63% 53%
HP Pro 25 >99% 25% 7% 72% 53% 39% 0.57 7% 35% 58% 50%
HP Pro 35 >99% 37% 8% 58% 56% 41% 0.64 8% 40% 52% 45%
Cool Charcoal Appearance5
The cool, non-fading color tone of HP Pro automotive window films are offered in four VLT levels.
This image has been simulated and is not actual product comparison.
5%
VLT
15%
VLT
25%
VLT
37%
VLT
1
For information on warranty terms, exclusions and certain limitations that apply please see the applicable product data sheets and other literature and bulletins on our website: graphics.averydennison.com/pds.
2Performance results are calculated on 1/4” (6mm) clear glass using NFRC methodology and LBNL Window 5.2 software, and are subject to variations in process conditions within industry standards.
3SIRR – Selective Infrared Rejection: the percentage of IR radiation that is not directly transmitted through a glazing system. Calculated as %SIRR = 100% – % Transmission (@ 780-2500nm).
4IRER – Infrared Energy Rejection: the percentage of Near Infrared Energy Rejection as measured between 780-2500nm. Calculated as the TSER over 780-2500nm: %IRER = 100% – 100*SHGC (@ 780-2500nm).
5Colors and tinting level are an approximate match. For a true color reference, please refer to the actual film sample.
All statements, technical information and recommendations about Avery Dennison products are based upon tests and information believed to be reliable but do not constitute a guarantee or warranty of any kind.
All Avery Dennison products are sold with the understanding that Purchaser has independently determined the suitability of such products for its intended and other purpose.