Gerber Label Stock – 2mil Matte Silver or Shiny Silver

Description

Gerber Label Stock – 2mil Matte Silver or Shiny Silver

2 mil Label Stock 15” Punched EDGE READY Color 10 Yard 50 Yard Matte Silver P60557A P60558A Shiny Silver P84501A P84502A

Polyester, 2 mil material, custom-formulated for use in the Gerber EDGE for the production of countless commercial and industrial applications which require labels, decals, and identification nameplates.

DESCRIPTION
Gerber Label Stocks are dimensionally stable, polyester-based films that resist tearing, abrasion
and heat. They have been formulated for use with the GERBER EDGE®, GERBER EDGE 2®,
and GERBER EDGE FX thermal transfer printing systems, in conjunction with GerberColor
Foils. They are backed with a 90-lb layflat liner and coated with a high-performance acrylic
adhesive.
U.L. recognized Gerber Label Stocks Clear, White, Brushed Silver/Aluminum, and Brushed
Gold are available in both 1 and 2 mil. Matte Silver and Shiny Silver are available in 2 mil. They
are all formulated for both interior and exterior applications, with the exception of Brushed Gold
Label stock which is for interior applications only.
INTENDED APPLICATIONS
Gerber Label Stocks are ideally suited for a wide variety of commercial and industrial label
applications in which durability, heat resistance and dimensional stability are required.
These films are not intended for backlit or vehicle applications. They should be applied to flat
surfaces that are clean and dry.
APPLICATION TECHNIQUES
Dry application methods should be used with Gerber Label Stocks and panels should be butted.
Gerber standard tack application tape is required for all EDGE-printed graphics.
Page 2 of 5
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water and
detergent. Do not use soaps or other cleaners with lotions or creams as they will leave a
residue. Thoroughly rinse the surface and allow it to completely dry.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates. If applying to glass, solvent wipe the
surface with a 2 to 1 mixture of water and isopropyl alcohol. Glass temperatures can vary
across the surface. These temperature variations can produce stresses which may cause the
glass to break. Use caution when applying to glass.
Some polycarbonate substrates may weaken when certain vinyl films are applied to them.
Because of this possibility, the user will need to determine if safety items such as helmets,
safety shields, and some windshields are compatible with their vinyl’s adhesive.
Many paint systems (e.g. two-part urethane) and some polycarbonate substrates will outgas if
they are not fully cured. Outgassing can cause permanent bubbling in most films; substrates
should be tested for outgassing prior to final application.
PERFORMANCE LIFE (UNPRINTED)
Gerber Label Stocks (White, Clear, Brushed Silver/Aluminum, Shiny Silver, and Matte Silver)
have an expected exterior durability of up to two years when applied vertically. Brushed Gold
Label stock is for interior applications only.
Performance statements are based upon field experience and exposure tests conducted
throughout the United States. Substrate selection, exposure angle, environmental conditions,
and maintenance of markings will affect actual performance. Continuous exposure in regions
that experience maximum sunny days will result in decreased performance. Extreme
temperature cycling over a short time may result in film cracking. This product is not
recommended for horizontal applications.
PRINTING
If your software material selection palette does not have Gerber Label Stocks, use Gerber HP
Series 220 normal print settings. Shiny Silver has unique settings that must be used for it to
print properly. Select Gerber Label Stock – Shiny Silver.
GerberColor Spot (GCS), GerberColor Process Pro CMYK (GCP), GerberColor Medal (GCM),
and GerberColor Transparent (GCT) Series Foils can be used to print onto Gerber Label Stock.
If your application requires a U.L. recognized component construction, be certain to use only the
GerberColor Series that have the following U.L. recognition sticker:

Recommended working environment is as follows:
 Operating temperature: 50ºF to 95ºF / 10ºC to 35ºC
 Recommended temperature for assured printing accuracy: 68ºF to 78ºF / 20ºC to 26ºC
 Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range;
actual range varies by material used)
Page 3 of 5
CUTTING
Gerber Label Stocks can be cut on any 15-inch EDGE-compatible sprocketed plotter. A 30°
SuperSharp blade is recommended. Plotters can be set to full speed.
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard manufactured by 3M is a durable, dimensionally stable, glossy vinyl
overlaminate. This film has a petrochemical-resistant construction and is intended to be used
when markings may be exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard is a custom-formulated, 1-mil, clear, extremely durable polyvinyl fluoride
(PVF) laminating film designed to further expand the resistance to weathering of printed
graphics for up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of up to five years (when printed by itself). When applied as a
protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the
base color by up to 30%.
SHELF LIFE AND STORAGE
Apply film within one year of receipt. Printed graphics should also be applied within one year.
Film and printed graphics (with or without premask) should be kept in a clean area free from
excessive moisture and direct sunlight. Maintain temperature at 70°F (21°C) and humidity at
50%.
Use a paper interleaf between layers of stacked or rolled printed materials. Do not stack printed
graphics face to face.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
Page 4 of 5
U.L. RECOGNITION
Gerber Label Stock has been recognized for use by Underwriters Laboratories, Inc. on several
different types of substrates through differing temperature extremes. The U.L. file number is
MH25192. It is UL969 certified, UL file number PGJI2.MH25192.
PHYSICAL PROPERTIES
Thickness 1 or 2 mil (See Description)
Film Color Clear, White, Shiny Silver, Matte Silver, Brushed Gold, and
Brushed Silver/Aluminum
Adhesive Pressure-sensitive acrylic
Adhesive Color Clear
Liner 90-lb layflat
Tensile Strength N/A
Elongation 0
Dimensional Stability No measurable shrinkage
Application Temp 32°F to 100°F (0°C to 38°C)
Service Temp -20°F to 257°F (-29°C to 125°C)
Removal Temp N/A
CHEMICAL RESISTANCE (UNPRINTED)
Chemical Agent Result
Household cleaners No effect
Mild acids No effect
Motor Oil No effect
Water No effect
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gerbertechnology.com/signage to learn more about our many other foils, materials and
equipment.
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard,
GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx,
ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, OMEGA, Process Pro, SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
LEXAN is a Registered Trademark of General Electric Company.
3M is a trademark of 3M Company.
enVision is a trademark of 3M Company that is licensed to Gerber.
U.L. and the U.L. Recognized symbol are Registered Trademarks of Underwriters Laboratories, Inc.
©2018 Gerber Technology. All Right Reserved
Category: EDGE READY™ FastFact #: 5549 Supplied by: Atermarkets Last Modified: 06/18/18
Page 5 of 5
Gerber Label Stock UL Recognition Data Table*
Gerber Label Stocks**
Clear White
Matte Silver
Brushed Silver
Brushed Gold
1 Mil 2 Mil 1 Mil 2 Mil 1 Mil 2 Mil
Max Min Max Min Max Min Max Min Max Min Max Min
Substrate
Aluminum,
Alkyd Base Enamel
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
Acrylic Paint 257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
Acrylonitrile
Butadiene Styrene
(ABS) Plastic
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
Galvanized Steel n/a n/a n/a n/a 257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
257°F
(125°C)
-40°F
(-40°C)
Polyester Paint 212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
257°F
(125°C)
-20°F
(-29°C)
257°F
(125°C)
-20°F
(-29°C)
257°F
(125°C)
-20°F
(-29°C)
257°F
(125°C)
-20°F
(-29°C)
Nylon, Melamine
Plastic,
Polycarbonate,
Phenolic Plastic
212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
Polystyrene Plastic 176°F
(80°C)
-20°F
(-29°C)
176°F
(80°C)
-20°F
(-29°C)
176°F
(80°C)
-20°F
(-29°C)
176°F
(80°C)
-20°F
(-29°C)
176°F
(80°C)
-20°F
(-29°C)
176°F
(80°C)
-20°F
(-29°C)
Porcelain 212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
257°F
(125°C)
-20°F
(-29°C)
257°F
(125°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
Stainless Steel n/a n/a 212°F
(100°C)
-20°F
(-29°C) n/a n/a 257°F
(125°C)
-20°F
(-29°C)
212°F
(100°C)
-20°F
(-29°C)
257°F
(125°C)
-20°F
(-29°C)
Unsaturated
(Thermoset)
Polyester Plastic
140°F
(60°C)
-40°F
(-40°C)
140°F
(60°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
176°F
(80°C)
-40°F
(-40°C)
* Suitable where exposed indoors to high humidity or occasional exposure to water or lubricating oils.
Also suitable where exposed outdoors affixed to substrates tested above at their particular listed exposure temperatures.
**Label material suitable for additional printing using the combination of GerberColor® Spot Color Series, GerberColor® Process Color Series, and
thermal transfer printing equipment. For use only in equipment where the acceptability of the combination is determined by Underwriters
Laboratories Inc.