3M Wrap Film Series 1080-S261 Satin Dark Gray

Description

3M Wrap Film Series 1080-S261 Satin Dark Gray
Dual cast wrap film features removable, pressure-activated adhesive with non-visible air release channels.
The 60 inch width allows you to wrap almost any section of a vehicle without seams.
Use it right out of the box, no need to print or apply an overlaminate.
Manufactured with two color layers for dimensional stability and durability.
3.5 mil cast film for easier handling and good conformability and lifting resistance.

http://multimedia.3m.com/mws/media/680101O/3mtm-wrap-film-series-1080.pdf
http://multimedia.3m.com/mws/media/682225O/3mtm-wrap-film-series-1080-sell-sheet-hr-printer-file.pdf
http://multimedia.3m.com/mws/media/451274O/3m-graphics-warranties-brochure.pdf
http://multimedia.3m.com/mws/media/451274O/3m-graphics-warranties-brochure.pdf

Product Description
Product Features
• Dual cast vinyl film in an array of colors (see “Colors” on page 3)
• Six distinctive-looking finishes: matte, satin, gloss, carbon fiber, straight fiber and brushed metal
• Use the film right out-of-the-box with or without graphic protection
• Pressure-activated adhesive for easy sliding, tacking, snap up and repositioning
• Non-visible, air release channels for fast, easy, bubble-free installations
• Available in 60 inch rolls—allowing almost any section of the vehicle to be wrapped without seams
• Removable with heat and/or chemicals.
• Expected Performance Life (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical, vehicle surface):
– 7 years for Matte, Satin, and Gloss
– 5 years for Carbon Fiber, Straight Fiber, and Brushed Metal
Recommended Types of Graphics and End Uses
• Solid color vehicle detailing
• Standard vehicle graphics, detailing and decoration, multiple layers of graphics
• Commercial vehicle and fleet graphics, emblems or striping
• Watercraft graphics applied above the static water line only
See 3Mgraphics.com/warranties for a complete list of compatible products that are approved by 3M for use with the base film covered in this
Bulletin and used for the creation of a graphic that may be eligible for the 3M™ MCS™ Warranty.
i IMPORTANT NOTE
Before using these films, please review “Handling Films” on page 6.
Graphic Protection
• 3M™ Wrap Overlaminate Series 8900
1080-S261 Satin Dark Gray, 60 in x 25 yd
3M ID 75347277354 UPC# 00051115897634
1080-S261 Satin Dark Gray, 60 in x 5 yd
3M ID 75347277636 UPC# 00051115897832
1080-S261 Satin Dark Gray, Custom
3M ID 75347277347