LUMINA AIR ADVANTAGE COLOR FILM 1025-003 Black Carbon Fiber

Description

LUMINA AIR ADVANTAGE COLOR FILM 1025-003 Black Carbon Fiber
1025 Series – FDC® Air Advantage™ Color Film
FDC Series 1025 is a premium grade matte finish or patterned high performance cast vinyl film
designed for wrap applications. This product features our exclusive Air Advantage™ adhesive
system which provides easy application without bubbles or wrinkles.
Reference: Application Guide – Air Advantage™ Adhesive

Film Technology: ………….. Cast – PVC
Film Thickness:…………….. 3.5 – 5.0 mil.
Color Availability: ………….. Variety of Colors – see color chart
Outdoor Durability: ……….. 5 years – when properly processed and applied
(*Expected Durability: unprinted media, vertical exposure and ideal conditions.)
Adhesive: ……………………… Air Advantage™ Permanent (Clean Removal) / Clear
(*Clean removal = up to 2 years from most surfaces. Removable = up to 3 years
from most surfaces with 30% or less residual adhesive. May require the use of heat
and or chemicals. The use of primers and adhesion promoters may greatly increase
the amount of residual adhesive.)
Adhesion:……………………… 1.2 lbs/in – 15 min, 2.5 lbs/in – 24 hrs
(PSTC-1, 180° peel @ 12” / min, 73° F, on stainless steel. Typical values –
individual values may vary. Test prior to use.)
Liner: ……………………………. 90# Layflat
Application:…………………… Flat Surfaces, Curves
(*This product may tent when used over rivets and corrugations and will require
careful application over complex curves, recessed and concave surfaces. Heat and
adhesion promoters may be required.)
Printing:………………………… N/A
Chemical Resistance: ……. No Effect: Distilled Water (24 hr), Detergent (24 hr), Gasoline (10 min), SAE 30
Motor Oil (10 min),
Temperature: …………….. Minimum Application Temperature is 60°F
(*Temperature applies for: graphics, substrate and environment.)
Service Temperature is -40°F to 200°F
Shelf Life: …………………. 1 year – when stored at 70°F and 50% relative humidity
Note: For further information regarding: printing, substrate cleaning, application, maintenance, durability
and removal please review the corresponding instructional bulletin available at www.fdcfilms.com.
Warranty: Data provided by FDC is for general information only. This data is not to be used for exacting specification purposes. Always pretest
product. Suitability for any given application is the responsibility of the user. Since FDC cannot control the conditions under which the
products referred to herein may be used or handled, it can make no guarantee as to the effectiveness, safety or applicability with respect
hereto. FDC’s only obligation shall be to replace such quantity of product proven to be defective. FDC shall not be liable for any injury, loss or
damage, direct or consequential, arising out of the use or the inability to use the product. Before using, the user shall determine the suitability
of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. The seller, FDC, shall not be
liable for any default or delay caused by contingency beyond its control or the control of its supplier including but not limited, short or reduced
supply of fuel, or other integral components of the product