Avery MPI2077 LSTR URM 1.5MPET 3.2 mil Clear Luster Calendered film with an ultra removable adhesive

Description

Avery MPI2077 LSTR URM 1.5MPET 3.2 mil Clear Luster Calendered film with an ultra removable adhesive
Avery HP MPI 2077 Luster Transparent is a unique construction ideal for changeable interior or exterior window graphics, including retail promotions, company identification, point-of-purchase displays, and doorway signs and decals. The ultraremovable adhesive is designed for easy and clean removability from glass.

BCI Imaging Supplies

BCI Imaging Supplies

Avery® HP MPI 2077 Luster Transparent
Ultra Removable StaFlat
(formerly: MPI 2021)
Revision: 3 Dated: 01/19/2011
Product Data Sheet
Page 1 of 3
Uses: Avery HP MPI 2077 Luster Transparent is a
unique construction ideal for changeable
interior or exterior window graphics,
including retail promotions, company
identification, point-of-purchase displays,
and doorway signs and decals. The ultraremovable
adhesive is designed for easy
and clean removability from glass.
Face: 3.4 mil (86 microns) matte
Adhesive: Ultra Removable
Acrylic (clear)
Liner: 90# StaFlat
Durability: Up to 1 years
(unprinted)
Application
Surfaces:
Flat
Features:
• Consistent printability
• Great image clarity and color pop
• Translucent, provides light transmission when applied over a light source
• Excellent shrink resistance, even with heavy ink loads
• Dimensionally stable liner for easy converting
• ICC profiles available on Avery website (www.iccprofiles.averygraphics.com)
Conversion:
Thermal Die-Cutting
Flat Bed Sign-Cut
Drum Roller Sign-Cut
Steel Rule Die-Cutting
Thermal Transfer
Screen Printing
Cold Overlaminating
Water based inkjet
Solvent based inkjet
Mild/Eco Solvent inkjet
UV inkjet
Latex Inkjet
Common Applications:
Fleet
Vehicle
Marine/ Watercraft
Backlit Signs
Wall Murals
POP/ Tradeshow
Window Graphics
Outdoor Signage
Floor Graphics

Avery® HP MPI 2077 Luster Transparent
Ultra Removable StaFlat
(formerly: MPI 2021)
Revision: 3 Dated: 01/19/2011
Product Data Sheet
Page 2 of 3
Graphics & Reflective Products Division AnswerLine: 800-231-4654
250 Chester Street www.averygraphics.com
Painesville, OH 44077
Physical Characteristics:
Property Value
Caliper, face 3.4 mil (97 µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.065”(1.651 mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield
Elongation
Gloss Hunter Gloss
@ 60
40-50
Adhesion: 15 min. 0.3 lbs/in (53 N/m)
24 hr. 0.5 lbs/in (88 N/m)
Flammability Self Extinguishing
Shelf-Life 6 months
Durability Vertical
Exposure
Up to 1 year
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-40° – 180°F (-40° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery® HP MPI 2077 Luster Transparent
Ultra Removable StaFlat
(formerly: MPI 2021)
Revision: 3 Dated: 01/19/2011
Product Data Sheet
Page 3 of 3
Graphics & Reflective Products Division AnswerLine: 800-231-4654
250 Chester Street www.averygraphics.com
Painesville, OH 44077
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Special Considerations:
Because of the unique properties and varieties of glass, special considerations must be considered for windows and
graphic applications. Avery Dennison accepts no liability for glass breakage.
• Glass absorbs heat when exposed to sunlight. The degree of absorption across windows can vary because of
shading, heating, and cooling ventilation, and insulation from window frames. These temperature differences across
the window produce stress, which can cause glass breakage. The ability of glass to resist breakage because of
temperature stress is affected by window size, glass thickness, glass treatments, quality, and design.
• Window cleaning methods also vary, from the type of cleaners used, to the washing methods employed. Specific
chemicals used in window cleaners may affect the adhesion of pressure-sensitive graphics. Power washing
methods may impact the adhesion of graphics, if the water pressure or temperature exceeds the graphic’s adhesion
capability. Power washing is not recommended for MPI 2077.
Related Documents:
The following Avery Dennison literature will provide complete information to the user for proper application, storage, and
other requirements and is available upon request from your Avery Dennison representative or from the Avery Dennison
website (www.na.averygraphics.com).
Document Title Reference Number
Substrate Cleaning and Preparation Instructional Bulletin #1.10
Storage, Maintenance, and Cleaning of PVC Films Instructional Bulletin #1.20
Screenprinting Ink Recommendations Cast, Reflective, Calendered and
Specialty Products
Instructional Bulletin #3.00
Multi Purpose Ink Jet OEM Qualification Matrix, Durability Reference, &
Troubleshooting Guide
Instructional Bulletin #5.80
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.
Avery MPI2077 LSTR URM 1.5MPET 3.2 mil Clear Luster Calendered film with an ultra removable adhesive 6288

A005696 MPI2077 LSTR URM 1.5MPET 54X50 YDS 3IN 54″ x 50 yd
A010496 MPI2077 LSTR URM 1.5MPET 54X5 3IN 54″ X 5 yd