Avery MPI2728 PERFORATED FILM 65/35 7 mil White/Black vinyl with removable adhesive for one-way visual panels

Description

Avery MPI2728 PERFORATED FILM 65/35 7 mil White/Black vinyl with removable adhesive for one-way visual panels
Avery Dennison® HP MPI 2728 Perforated
Window Film 65/35 is a perforated flexible
calendered film for use on exterior-mount
one-way visual panels. Graphics printed on
this material are visible from the front and
“invisible” from the back when mounted on
windows. HP MPI 2728’s 65.35 perforation
pattern provides an open area of 35%
allowing for the best possible image quality
while still providing a one-way graphic panel.
This film is intended for stationary windows.

BCI Imaging Supplies
Avery Dennison® HP MPI 2728
Perforated 65/35
Permanent StaFlat™
(formerly: MPI 4065)
Revision: 5 Dated: 12/02/13
Product Data Sheet
Page 1 of 3
averygraphics.com
AnswerLine: 800-231-4654
Uses:
Avery Dennison® HP MPI 2728 Perforated
Window Film 65/35 is a perforated flexible
calendered film for use on exterior-mount
one-way visual panels. Graphics printed on
this material are visible from the front and
“invisible” from the back when mounted on
windows. HP MPI 2728’s 65.35 perforation
pattern provides an open area of 35%
allowing for the best possible image quality
while still providing a one-way graphic panel.
This film is intended for stationary windows.
Face: 7 mil (178 microns)matte
calendered
Adhesive: Black Removable Acrylic
Liner: 90# StaFlat™ with clear back
laminate
Durability: Up to 3years (unprinted)
Application
Surfaces:
Flat, simple curves
Features:
• One-way visibility for window applications
• 65/35 hole pattern provides better image quality while still allowing one-way visibility
• 1.5 mil hole provides light transmission
• Great image clarity and color pop
• Provides up to 63% reduction of indoor solar heat gain for window applications
Conversion:
• Thermal Die-Cutting
• Flat Bed Sign-Cut
• Drum Roller Sign-Cut
• Steel Rule Die-Cutting
• Solvent based inkjet
• Mild/Eco Solvent inkjet
• UV inkjet
Common Applications:
• Stationary Windows

Avery Dennison® HP MPI 2728
Perforated 65/35
Permanent StaFlat™
(formerly: MPI 4065)
Revision: 5 Dated: 12/02/13
Product Data Sheet
Page 2 of 3
averygraphics.com
AnswerLine: 800-231-4654
Physical Characteristics:
Property Value
Caliper, face 7 mil (178µm)
Caliper, adhesive 1.0mil (25 µm)
Dimensional
stability
<0.03”(0.76mm)
Note: Ink loads in excess of 250%
may cause increased shrinkage of
the printed film.
Tensile at Yield N/A
Elongation N/A
Gloss N/A
Adhesion: 15 min. Removable 4.0 lbs/in (700 N/m)

Flammability Self Extinguishing
Shelf-Life 1 year
Durability Vertical
Exposure
Unprinted – 3 years
Printed – Up to 1 year
Min. Application
Temperature
50° F (10° C)
Service
Temperature
-50° – 180°F (-45° – 82° C)
(Reasonable range of
temperatures which would
be expected under normal
environmental conditions).
Chemical
resistance
Resistant to most mild
acids, alkalis, and salt
solutions.
Important:
Information on physical and chemical characteristics
are based on tests believed to be reliable. The values
are intended only as a source of information. This
information is given without guaranty and do not
constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of
any material for their specific purpose. (Data
represents average values where applicable, and is
not intended for specification purposes)
Warranty:
All statements, technical information and
recommendations about Avery Dennison
products are based upon tests believed to be
reliable but do not constitute a guarantee or
warranty. All Avery Dennison products are sold
with the understanding that Purchaser has
independently determined the suitability of such
products for its purposes. Avery Dennison
products are warranted to be free from defects in
material and workmanship for either one year (or
the period stated on the specific product
information literature in effect at time of delivery, if
longer) from date of shipment if said product is
properly stored and applied. It is expressly agreed
and understood that Avery Dennison’s sole
obligation and Purchaser’s exclusive remedy
under this warranty, under any other warranty,
express or implied, or otherwise, shall be limited
to repair or replacement of defective product
without charge at Avery Dennison’s plant or at the
location of product (at Avery Dennison’s election),
or in the event replacement or repairs is not
commercially practical, to Avery Dennison’s
issuing Purchaser a credit reasonable in light of
the defect in the product.
Avery Dennison’s liability for defective products
shall not exceed the purchase price paid
therefore by Purchaser and in no event shall
Avery Dennison be responsible for any incidental
or consequential damages whether foreseeable
or not, caused by defects in such product,
whether such damage occurs or is discovered
before or after replacement or credit, and whether
or not such damage is caused by Avery
Dennison’s negligence.
NO EXPRESS WARRANTIES AND NO IMPLIED
WARRANTIES, WHETHER OF
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR USE, OR OTHERWISE (EXCEPT
AS TO TITLE), OTHER THAN THOSE
EXPRESSLY SET FORTH ABOVE WHICH ARE
MADE EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, SHALL APPLY TO PRODUCTS
SOLD BY AVERY DENNISON. AVERY
DENNISON SPECIFICALLY DISCLAIMS AND
EXCLUDES ALL OTHER SUCH WARRANTIES.
NO WAIVER, ALTERATION, ADDITION OR
MODIFICATION OF THE FOREGOING
CONDITIONS SHALL BE VALID UNLESS MADE
IN WRITING AND MANUALLY SIGNED BY AN
OFFICER OF AVERY DENNISON.

Avery Dennison® HP MPI 2728
Perforated 65/35
Permanent StaFlat™
(formerly: MPI 4065)
Revision: 5 Dated: 12/02/13
Product Data Sheet
Page 3 of 3
averygraphics.com
AnswerLine: 800-231-4654
Dimensional stability:
Is measured on a 6” x 6” (150 x 150 mm) aluminum panel to which a specimen has been applied; 72 hours after
application the panel is scored in a cross pattern, exposed for 48 hours to 150°F (65°C), after which the shrinkage is
measured.
Adhesion:
(FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel panel, 24 hours after the
specimen has been applied under standardized conditions. Initial adhesion is measured 15 minutes after application of
the specimen.
Flammability:
A specimen applied to aluminum is subjected to the flame of a gas burner for 15 seconds. The film should stop burning
within 15 seconds after removal from the flame.
Temperature range:
A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1
hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low
temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration.
Chemical Resistance:
All chemical tests are conducted with test panels to which a specimen has been applied 72 hours after application the
panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen
is examined for any deterioration.
Special Considerations:
Because of the unique properties and varieties of glass, special considerations must be considered for windows and
graphic applications. Avery Dennison® accepts no liability for glass breakage.
• Glass absorbs heat when exposed to sunlight. The degree of absorption across windows can vary because of
shading, heating, and cooling ventilation, and insulation from window frames. These temperature differences across
the window produce stress, which can cause glass breakage. The ability of glass to resist breakage because of
temperature stress is affected by window size, glass thickness, glass treatments, quality, and design.
• Window cleaning methods also vary, from the type of cleaners used, to the washing methods employed. Specific
chemicals used in window cleaners may affect the adhesion of pressure-sensitive graphics. Power washing
methods may impact the adhesion of graphics, if the water pressure or temperature exceeds the graphic’s adhesion
capability.
Revisions are italicized
Avery Dennison is a registered trademark of Avery Dennison Corp.

Avery MPI2728 PERFORATED FILM 65/35 7 mil White/Black vinyl with removable adhesive for one-way visual panels 3581 3580 3582

Stock A001522 MPI2728 PERF FILM 65/35 54X25 YDS 3IN