Description

MacTac IMAGin JT5828R floor graphic vinyl

MacTac IMAGin JT5828R floor graphic vinyl

4552-JX5828R 54″ x 164′ IMAGin JT5828R

MacTac

JT5828R is a 3.7-mil matte white, soft calendered PVC film designed for solvent-based ink jet printing. JT5828R is coated on one side with removable, opaque, acrylic pressure sensitive adhesive and supplied with an 86# Kraft liner. JT5828R is designed for medium-term, indoor or outdoor advertising and promotions on flat or slightly curved surfaces. Use with Permacolor Textured overlaminates

floor graphic vinyl

http://mactac.com/fileadmin/user_upload/Graphic/Performance_Guides/JT5828R.pdf

TYPICAL VALUES*
PHYSICAL PROPERTIES: TEST METHOD
Peel Adhesion, lb./in.(N/25mm) FTM – 1
180° on Stainless Steel – 24 hr. 0.6 – 1.6 (3 – 7)
Quick Tack on SS, lb. /in² (N/25mm) 0.5 – 1.3 (2 – 4) FTM – 9
Dimensional Stability, (%) FTM – 14
48 hours @ 158°F max 0.5 10” x 10” Sample
bonded to aluminum.
Temperature Ranges,
Minimum Application: 50°F (+10°C)
End Use: -40°F to 158°F (-40°C to 70°C)
Surface Burning Characteristics ASTM E84-01 or
Flame Spread 5 ANSI/NFPA 255 or
Smoke Density 10 UCB 8-1
Meets: ANSI Class A
NFPA Class A
UCB Class 1
INTENDED FOR: Wide format, eco-solvent, solvent-based and UV-cured inkjet printing. To achieve
the best possible print quality, please make sure that the correct ICC profiles or printer settings are used.
Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com . Printer and
heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s
websites.
The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of
printing systems, inks and software can significantly affect output. It is the customer’s responsibility to
determine the suitability of any profile for use in their specific print environment.
DURABILITY: The outdoor durability of the unprinted film is 4 years. JT5828R has up to 2 year
removability after application. Overlamination of the inkjet-printed material with PermaColor or
IMAGin overlaminates delays color fading that may occur over time. This color fading is mainly
dependent upon the inks quality (see technical data sheets given by the ink manufacturers) and the
pressure sensitive media being used IMPORTANT NOTICE: The information given and the recommendations made herein are based on our research and are believed to be accurate, but no
guarantee of their accuracy or completeness is made. In every case, user shall determine before using any product in full scale production, or in any way,
whether such product is suitable for user’s intended use for their particular purpose under their own operating conditions. User assumes all risk and liability
whatsoever in connection with their use of any product. The products discussed herein are sold without any warranty as to merchantability or fitness for a
particular purpose, or any other warranty, express or implied. No representative of ours has any authority to waive or change the foregoing provisions, and
no statement or recommendation not contained herein shall have any force of effect unless in an agreement signed by the officers of seller and
manufacturer. Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or
recommendation to practice any invention covered by any patent without authority from the owner of the patent. The following is made in lieu of all
warranties, express or implied: Seller’s and manufacturer’s only obligation shall be to replace or credit such quantity of the product proved to be defective
at its discretion.
TM Trademark of Morgan Adhesives Company.
® Registered Trademark of Morgan Adhesives Company.
www.MACtac.com
LIMITATIONS: Due to the wide variability of interior walls, sealants and paints, no claims for
successful applications to or removal from painted wall surfaces are made by MACtac. It is the users’
responsibility to determine the products suitability for the intended wall.
1) The user is responsible for determining the product’s suitability, including adhesion and if
needed, removal characteristics when used in applications other than listed specifically in
this Performance Guide.
2) If there are any questions about applications, please contact your MACtac sales
representative to discuss your requirements for recommendations.
3) If this is a printed Performance Guide it is an uncontrolled document. Please check the
MACtac website for the latest, most up-to-date version.
REMOVABILITY:
This product has 2 year removability after application on many surfaces. The removability of JT5828R
may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC.
With such substrates an increase of adhesion over time may occur and adhesive residue on removal may
be noticed.
RECOMMENDATIONS:
Always test your combination of JT5000 products, inks and laminating films prior to commercial use.
1) Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. The
maximum allowable ink saturation is 270%
2) Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 – 48 hr.
drying time – open to the air. Inks do not dry when printed media is rolled up. The prints must be
dry prior to lamination.
3) Laminating Conditions: If the printed graphic is likely to be exposed to corrosive liquids,
smoke, fumes, and highly polluted areas or there is a likelihood of scratching, it is highly
recommended to laminate with Permacolor LF3600 series (High Performance), CG8000 series
(intermediate) or PC7000 series (economical) overlaminating films. Please be aware that adding
an overlaminate will significantly reduce conformability to complex surfaces.
4) Transportation Conditions:
To allow for easy transportation, IMAGin JT5000 series can be rolled up, with the image out,
with a minimum diameter of 6 inches (15cm). When the image is not protected by an
overlaminate, make sure the print is completely dry and protected in a plastic bag. During
transportation or storage, avoid exposing them to extreme temperature and humidity changes.
SHELF LIFE:
2 year from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original
package.
* Values given are typical and are not necessarily for use in specification.

• D.e.c.o.S.a.t.i.n. m.e.e.t.s.t.h.e. f.l.a.m.e. s.p.r.e.a.d. a.n.d. s.m.o.k.e. d.e.n.s.i.t.y.r.e.q.u.i.r.e.m.e.n.t.s.f.o.r. A.N.S.I./.N.F.P.A –. C.l.a.s.s. A and IBC – Class A. • D..c.o.S.a.t.i.n. i.s. a.v.a.i.l.a.b.l.e. i.n. 54”x 150’,3”.c.o.r.e. r.o.l.l. P.r.o.d.u.c.t. G.a.u.g.e. A.d.h.e.s.i.v.e .L.i.n.e.r. M.i.n. A.p.p. O.u.t.d.o.o.r. D.u.r.a.b.i.l.i.t.y. D.e.c.o.S.a.t.i.n. D.A.0.1.2. 8. m.i.l.s. R.e.p.o.s.i.t.i.o.n.a.b.l.e. R.e.m.o.v.a.b.l.e.8.6.#.P.o.l.y.c.o.a.t.e.d.K.r.a.f.t..5.0.°.F. .(.+.10.°.C.). Up. to. one. year.