Description
Mojave SPMRF 7.0 mil. White Reflective Vinyl
Catalina Graphic Films Mojave Reflective Films have pressure-activated adhesive for easy installation, and are
ideal for use with Eco-Solvent, Solvent and UV-Based inkjet printers. SPMRF is a flexible, enclosed lens glassbead
retroreflective sheeting with removable adhesive. Conforms to all ASTM D 4956 requirements.
RECOMMENDED APPLICATIONS
Simple Curves
Decals
Fleet without Rivets
Indoor
Outdoor
OVERVIEW
Face Film 7.0 mil. White Reflective Vinyl
Adhesive Gray Permanent
Liner 78# Layflat
Opacity Excellent
Gloss Level High
Outdoor Durability Up to 5 Years
SPECIFICATIONS
Application
Typical applications for this material are vehicle markings where
application to riveted and corrugated surfaces may be required. It
can also be used on commercial signs and various labels and is highly
resistant against to extremes of hot, cold, dry and humid weathering
conditions. Additional usage include permanent traffic signage, emblems
and temporary traffic control devices. This type of sheeting conforms to
ASTM D4956 TYPE I Specifications.
Printing Methods Digital printing with use of Eco-solvent and solvent inks and most screen
printing inks.
Minimum Surface/Ambient
Air Application Temperature Minimum 20º C.
Application Surface Minimum application temperature for flat surfaces 15ºC, for corrugated
and riveted surfaces 25ºC.
Typical Film Caliper (w/Adhesive) .13mm
Elongation > 120%
Chemical Resistance Excellent.
Water Resistance Excellent.
Adhesion Permanent bonding will take place approximately 48 hours after
application.
Finish Gloss meter >85 @ 60 degrees
Shelf Life 12 months when properly stored under conditions of 70ºF and 50%
humidity.
7.0 mil. White Reflective Vinyl
This reflective conforms to all ASTM D 4956 requirements. Ideal for permanent traffic signage, emblems and temporary traffic control devices. Removable up to three (3) years with heat.
SPMRF3010N SPMRF3025N SPMRF3050N SPMRF4810N SPMRF4825N SPMRF4850N
Reviews
There are no reviews yet.