Description
1 mil PSA Clear Dry Erase Laminate
Make any graphics a dry erase board. Write on/Wipe off capability. For indoor graphics only.
Adhesive Backed 1 mil Dry Erase Laminate
• For use with dry erase type markers
• Laminate may be written on repeatedly; wipes clean with dry tissue or dry erase
cleaning fluid
• Readily laminates to any smooth sealed surface
Construction
Product Number: KJERASELAM
Adhesive: Clear Permanent Acrylic
Film: 1.0 mil Clear Polypropylene
Liner: 50# paper
Gloss Level: 90 (avg.) @ 60
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They are
given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific
purpose. (Data represents averages and is not intended for use as a specification.)
Durability: Indoor Use Only – Up to 1 yea
Minimum Application Temperature: +50° F (Minimum for Substrate)
Service Temperature Range: -40° F to 180° F
Chemical Resistance: Resistant to ammonium hydroxide – 10%,
detergent, distilled water, gasoline and
hydrochloric acid – 10%
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 2.5 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity.
Reviews
There are no reviews yet.