Description

10 mil PSA Textured Vinyl

Cost effective alternative to polycarbonate. Use for point of purchase, exhibit booths at tradeshows, roll-up banner stands, retail counter-top and mouse pad advertising. Special embossed surface helps reflect light

Adhesive Backed 10 mil Textured Vinyl Laminate
• Use for point of purchase, exhibit booths at tradeshows, roll-up banner stands,
retail counter-top and mouse pad advertising.
• Special embossed surface helps reflect light.
Construction
Product Number: KJ10TEXTURED
Adhesive: Clear Permanent Acrylic
Film: 10 mil Soft Textured Vinyl
Liner: 4.6 mil (78# C1S Liner)
Finish: Textured Clear
Gloss Level: 10 (avg.) @ 60°
Typical Performance Values
The following information on physical and chemical characteristics is based upon tests
believed to be reliable. The values are intended only as a source of information. They
are given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific
purpose. (Data represents averages and is not intended for use as a specification.)
Durability: Outdoor – up to 1 year
Minimum Application Temperature: +40° F (Minimum for Substrate)
Service Temperature Range: -40° F to +180° F (-46° C to + 82° C)
Temperature Resistance: -65° F to + 225° F
Chemical Resistance: Resistant to alkalies, mild acids, most
petroleum based oil, grease and aliphatic
solvent and salts
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 3.0 lb/in
Shelf Life: 1 year from ship date when stored in proper
conditions 70° F and 50% relative humidity