10m MTP 9/125 OS1 Single-Mode Fiber Optic Cable (Plenum-Rated) – Yellow

Description

10m MTP 9/125 OS1 Single-Mode Fiber Optic Cable (Plenum-Rated) – Yellow
With its higher port density, MTP is easier to install – just pull 1 cable with 12 fibers for one easy plug-in. OFNP plenum-rated for in-wall use without conduit.
0 Reviews

Product # :
31462

Connector 1 :
(1) MTP
Connector 2 :
(1) MTP
Lengths :
32.8ft49.2ft65.6ft98.4ft164ft
Description Certifications Specs
Product Description
Make MTP/MPO your choice for high density fiber networks; it’s specifically designed for fast ethernet, fiber channel, ATM and gigabit ethernet applications. Save time and money with MTP/MPO’s increased ease of installation – simply pull one cable rather than twelve. Each MTP/MPO fiber assembly consists of twelve 9/125µm Single-mode fibers under one OFNP plenum-rated jacket.

With our MTP/MPO, it’s possible to run a single cable that automatically terminates twelve fibers in one easy plug-in. Plus, the small form factor of an MTP/MPO connector provides a higher port density. With its push-pull release mechanism, the MTP/MPO connector is easy to engage and disengage. Plus, its latch design prevents the plug from snagging when jumper cables are being routed. Straight-through pinning; immune to electrical interference.

Please Note: MTP/MPO is a registered trademark of US Conec Ltd. Attenuation testing performed in accordance with EIA/TIA-45571A.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Product Certifications
Product Specifications
Color : Yellow
Length : 10.00 Meter
UPC : 757120314622
Warranty : Lifetime
Vendor : C2G
Weight : 0.205 LB
• Connector Dimensions: 7.75 mm height x 61 mm depth
• Jacket material: OFNP-rated Plenum
• Jacket OD: 3.0 mm
• Installation Tensile Load: 100 N (445 lbs)
• Long-Term Tensile Load: 50 N (222 lbs)
• Installation Minimum Bend Radius: 4.5 cm (1.8 in)
• Long-Term Minimum Bend Radius: 3.0 cm (1.2 in)
• Attenuation at 1550 nm: 0.25 dB/km
• Attenuation at 1310 nm: 0.35 dB/km
• Maximum Connector Loss: 0.50 dB
• Typical Return Loss: -40 dB
• Operating Temperature: -20°C to +70°C

Please Note: Attenuation testing performed in accordance with EIA/TIA-45571A.