15ft High Speed HDMI® Cable with Built-In Power Inserter – 4K 60Hz

Description

15ft High Speed HDMI® Cable with Built-In Power Inserter – 4K 60Hz
Provide low loss power insertion for active HDMI devices, while supporting resolutions up to 4K at 60Hz
0 Reviews

Product # :
56792

Connector 1 :
(1) HDMI Male, (1) USB Micro-B Female
Connector 2 :
(1) HDMI Male, (1) USB-A Male, (1) USB Micro-B Male
Lengths :
15ft10ft
Description Features Specs Support
Product Features
• Supports all HDMI 2.0 features including resolutions up to 4K (4096 x 2160 at 60Hz)
• Low loss power insertion
• Attached Micro USB female power inserter
• Micro USB male to USB-A male cable
Product Description
The High Speed HDMI Cable with Built-In Power Inserter supports all HDMI 2.0 features and is the ideal solution for supporting HDMI bus-powered devices such as extenders, active cables, AOC cables or signal-sensing switches. This cable eliminates the need for separate voltage inserters or adapters, which increases reliability.

Power
The power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video (EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows for the necessary and proper voltages for the hardware “handshake”, HDCP key authentication and exchange, EDID information exchange and hot plug connection detect.

Performance
The attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting, and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.

Note: For proper use of this cable, the USB Micro-B female connector must be attached to a power source. The cable is directional with a Source/Transmitter (TX) side and a Display/Receiver (RX) side. The cable and HDMI connectors are marked with TX and RX for added convenience.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
11-Piece Computer Tool Kit (TAA Compliant)
$14.99
USB-C Power Bank 10,200mAh
$74.99
10ft USB-C® to USB-A SuperSpeed USB 5Gbps Cable M/M – Black
$18.99
USB-C® Travel Dock with HDMI®, DisplayPort™, VGA and Power Delivery up to 60W
$149.99
25ft 12 AWG Velocity™ Bulk Speaker Wire
$19.99
Fan Kit for Vertical Wall-Mount Cabinet – 12 VDC
$69.99
radiant® Furniture Power Center with 2 Outlets and USB – Black
$89.99
Product Specifications
Color : Black
Length : 15.00 Foot
UPC : 757120567929
Warranty : Lifetime
Vendor : C2G
Weight : 0.458 LB
• HDMI Specification: 2.0

Electrical Specifications

• Type: UL20276 30AWG/5P/4C; 80°C, 30V; Color: Black; UL-E342987
• Voltage Rating: 30V
• Signal Bandwidth: 600MHz
• Insulation Resistance: 100M(OHMS*KM Min at 20°C)
• Dielectric Strength: AC-500V/Min

Physical Specifications

• Operating Temperature: 0°C to +50°C; 15-85% RH (Non-Condensing)
• Storage Temperature: -25°C to +85°C; 15-85% RH (Non-Condensing)
• Shield Type/Braid Coverage: 50%
• Shield Type/Braid: 16/4/0.12(AL)
• Jacket Material & Thickness: PVC & 0.51mm
• Drain Wire AWG & Construction: 30AWG & 7/010TC
• Minimum Bend Radius: 120
• 100% Test for Short/Open: 10 Mohm Insulation Resistance (300V DC)
• Product is CE marked and conforms to 2011/65/EU RoHS2

HDMI Connector

• Gender: Male x 2
• Insulation: Black
• Pin: Gold Plated
• Plug Shell: Nickel Plated

Micro USB Connector

• Gender: Female Micro B
• UL2725 28AWG*2C
• OD: 3.0mm
• Color: Black 45P PVC
• Shell: Nickel Plated

USB Power Cable

• Gender: USB-A Male to USB Micro-B Male
• Contact Resistance: 2 ohm(max)
• Insulation Resistance: 10 Mohm(min)
• Hi-Pot Test: DC 300V/10ms
Product Support
Downloads

• Download the Data Sheet