Description
15ft VGA Monitor/Projector Cable with Rounded Low Profile Connectors M/M – Plenum CMP-Rated
CMP-rated plenum jacket; low profile HD15 connectors and small cable diameter enable easier in-wall installation
5.0
|
1 Review
Product # :
40091
Connector 1 :
(1) VGA Male
Connector 2 :
(1) VGA Male
Lengths :
15ft25ft35ft50ft
Description Features Certifications Specs Support
Product Features
Plenum, CMP-Rated jacket
Rounded connectors for easily installation
Supports up to a 1280×1024 resolution
Foil and braided shield to protect from interference
Product Description
Audio/video installations in educational and commercial settings often require plenum-rated cabling. Our plenum-rated line was engineered to overcome common challenges faced by installers.The HD15 connectors are low profile (1.25in total depth) which saves valuable space in the gang box, while the rounded shape (fits 1.25in inner diameter mounts) accommodates smaller mounts so that the cable can be easily hidden from view. And our small-diameter (0.25in) cable design further reduces the space and clearance required to run the necessary cabling through walls and plenum air spaces.
This cable is constructed from three 75 Ohm 30 AWG coaxial cables plus one 26 AWG twisted pair wire to ensure RGBHV signal integrity in your installation.
The coax cables feature a tinned copper braid that provides 92% shielding. The twisted pair is individually shielded with an aluminum polyester tape to provide 100% coverage. CMP rating provides the fire protection required to run within walls and air plenums without the need for conduit. Learn more about our technology solutions for education.
SXGA provides a screen resolution of 1280 x 1024 pixels. Not sure what resolution you need? See our VGA resolution guide.
Please Note: Pin 9 is not loaded. Pin 9 is not required for standard computer video applications.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like
10m MTRJ-LC 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$35.99
1m MTRJ-ST 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$15.99
20m LC-ST 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$49.99
8m MTRJ-LC 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$30.99
15m MTRJ-ST 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$29.99
75ft Cat6 Non-Booted UTP Unshielded Ethernet Network Patch Cable – Plenum CMP-Rated – Gray (TAA Compliant)
$49.99
2m MTRJ-MTRJ 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$15.99
Product Certifications
Product Specifications
Color : Black
Length : 15.00 Foot
UPC : 757120400912
Warranty : Lifetime
Vendor : C2G
Weight : 0.796 LB
For more detailed specifications, please read this.
Electrical Characteristics
3 Coax Conductors
Impedance – 75 +/- 5?
Capacitance – 54 pF/m nom
DC Resistance – 0.347 ?/m @20C
Dielectric Strength – 750VAC/minute min.
Insulation Resistance (500V) – 100 Mohm/KM @20C
Attenuation (nominal) –
Frequency dB/100 ft
1.0 MHz 0.9
3.6 MHz 1.7
5.0 MHz 1.9
7.0 MHz 2.4
9.0 MHz 2.6
10.0 MHz 2.8
30.0 MHz 4.4
50.0 MHz 5.8
100.0 MHz 8.2
2 Twisted Pairs
DC Resistance – 0.139 ?/m @20C
Dielectric Strength – 750VAC/minute min
Insulation Resistance – 100 M?/KM @ 20C
Physical Characteristics
Voltage Rating: 300V
Temperature Rating: 75C
Approvals: RoHS Compliant
Package Type: Polybag
Conductor (Qty. 3)
Conductor Type – 30AWG 7/38 Tinned Copper, .012 nom. OD
Insulation – Cellular FEP, .049 nom. OD, .0185 avg. wall
Shield – Braid, 4 ends 38AWG Tinned Copper, 92% min. coverage
Jacket – CMP-rated Low Smoke PVC, (color code: (1) red, (1) blue, (1) green), .083nom OD, .008 avg. wall
Conductor (1 pair)
Conductor Type – 26AWG 7/34 Tinned Copper, .019 nom. OD
Insulation – Low Smoke PVC, .029 nom. OD, .005 avg. wall
Pairing Type: Pair 1 (blue + violet), Twisted
Conductor (1 pair):
Conductor Type – 26AWG 7/34 Tinned Copper, .019 nom. OD
Insulation – Low Smoke PVC, .029 nom. OD, .005 avg. wall
Pairing Type – Pair (red + orange), Twisted w/Drain Wire (26 AWG 7/34TC)
Connector (Qty. 2)
Connector Type – HD15 Solder type
Gender – Male to Male
Contact Material – Gold Flash
Insulation – Black PBT
Shield – Copper-foil tape cover pre-mold, w/360 degree solder to connector shell and cable braid
Hood Material – Molded Low Smoke PVC, (color: black)
Overall Cable
Shield 1: Aluminum/Polyester Tape, 25% min overlap coverage
Shield 2: Braid Shield, 9 ends 36 AWG Tinned Copper, 85% min. coverage
Jacket: CMP-rated Low Smoke PVC (black), .248 nom. OD, .018 avg. wall
Product Support
Downloads
Download the technical specifications
Reviews
There are no reviews yet.