15ft VGA Monitor/Projector Cable with Rounded Low Profile Connectors M/M – Plenum CMP-Rated

Description

15ft VGA Monitor/Projector Cable with Rounded Low Profile Connectors M/M – Plenum CMP-Rated
CMP-rated plenum jacket; low profile HD15 connectors and small cable diameter enable easier in-wall installation
5.0
 | 
1 Review

Product # :
40091

Connector 1 :
(1) VGA Male
Connector 2 :
(1) VGA Male
Lengths :
15ft25ft35ft50ft
Description Features Certifications Specs Support
Product Features
• Plenum, CMP-Rated jacket
• Rounded connectors for easily installation
• Supports up to a 1280×1024 resolution
• Foil and braided shield to protect from interference
Product Description
Audio/video installations in educational and commercial settings often require plenum-rated cabling. Our plenum-rated line was engineered to overcome common challenges faced by installers.The HD15 connectors are low profile (1.25in total depth) which saves valuable space in the gang box, while the rounded shape (fits 1.25in inner diameter mounts) accommodates smaller mounts so that the cable can be easily hidden from view. And our small-diameter (0.25in) cable design further reduces the space and clearance required to run the necessary cabling through walls and plenum air spaces.

This cable is constructed from three 75 Ohm 30 AWG coaxial cables plus one 26 AWG twisted pair wire to ensure RGBHV signal integrity in your installation.

The coax cables feature a tinned copper braid that provides 92% shielding. The twisted pair is individually shielded with an aluminum polyester tape to provide 100% coverage. CMP rating provides the fire protection required to run within walls and air plenums without the need for conduit. Learn more about our technology solutions for education.

SXGA provides a screen resolution of 1280 x 1024 pixels. Not sure what resolution you need? See our VGA resolution guide.

Please Note: Pin 9 is not loaded. Pin 9 is not required for standard computer video applications.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
10m MTRJ-LC 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$35.99
1m MTRJ-ST 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$15.99
8m MTRJ-LC 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$30.99
15m MTRJ-ST 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$29.99
75ft Cat6 Non-Booted UTP Unshielded Ethernet Network Patch Cable – Plenum CMP-Rated – Gray (TAA Compliant)
$49.99
2m MTRJ-MTRJ 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$15.99
10m MTRJ-MTRJ 62.5/125 OM1 Duplex Multimode PVC Fiber Optic Cable – Orange
$34.99
Product Certifications
Product Specifications
Color : Black
Length : 15.00 Foot
UPC : 757120400912
Warranty : Lifetime
Vendor : C2G
Weight : 0.796 LB
For more detailed specifications, please read this.

Electrical Characteristics

3 Coax Conductors
• Impedance – 75 +/- 5?
• Capacitance – 54 pF/m nom
• DC Resistance – 0.347 ?/m @20C
• Dielectric Strength – 750VAC/minute min.
• Insulation Resistance (500V) – 100 Mohm/KM @20C
• Attenuation (nominal) –
Frequency dB/100 ft
1.0 MHz 0.9
3.6 MHz 1.7
5.0 MHz 1.9
7.0 MHz 2.4
9.0 MHz 2.6
10.0 MHz 2.8
30.0 MHz 4.4
50.0 MHz 5.8
100.0 MHz 8.2

2 Twisted Pairs
• DC Resistance – 0.139 ?/m @20C
• Dielectric Strength – 750VAC/minute min
• Insulation Resistance – 100 M?/KM @ 20C

Physical Characteristics

• Voltage Rating: 300V
• Temperature Rating: 75C
• Approvals: RoHS Compliant
• Package Type: Polybag

Conductor (Qty. 3)
• Conductor Type – 30AWG 7/38 Tinned Copper, .012” nom. OD
• Insulation – Cellular FEP, .049” nom. OD, .0185” avg. wall
• Shield – Braid, 4 ends 38AWG Tinned Copper, 92% min. coverage
• Jacket – CMP-rated Low Smoke PVC, (color code: (1) red, (1) blue, (1) green), .083”nom OD, .008” avg. wall

Conductor (1 pair)
• Conductor Type – 26AWG 7/34 Tinned Copper, .019” nom. OD
• Insulation – Low Smoke PVC, .029” nom. OD, .005” avg. wall
• Pairing Type: Pair 1 (blue + violet), Twisted

Conductor (1 pair):
• Conductor Type – 26AWG 7/34 Tinned Copper, .019” nom. OD
• Insulation – Low Smoke PVC, .029” nom. OD, .005” avg. wall
• Pairing Type – Pair (red + orange), Twisted w/Drain Wire (26 AWG 7/34TC)

Connector (Qty. 2)
• Connector Type – HD15 Solder type
• Gender – Male to Male
• Contact Material – Gold Flash
• Insulation – Black PBT
• Shield – Copper-foil tape cover pre-mold, w/360 degree solder to connector shell and cable braid
• Hood Material – Molded Low Smoke PVC, (color: black)

Overall Cable
• Shield 1: Aluminum/Polyester Tape, 25% min overlap coverage
• Shield 2: Braid Shield, 9 ends 36 AWG Tinned Copper, 85% min. coverage
• Jacket: CMP-rated Low Smoke PVC (black), .248” nom. OD, .018” avg. wall
Product Support
Downloads

• Download the technical specifications